The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Safety Code for Elevators and Escalators | 1993 | ANSI/ASME A17.1 | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 | ||||
ANSI | Gas-Fired Construction Heaters | ANSI Z83.7 | ||||
ISO | Specification for Carbon Steel Electrodes and Flux | 2 | 1997 | 671.52 A511 No. A5.17/A5.17M-97 | ||
AWS | Specification for the Qualification of Welding Fab | 1 | 2000 | 671.52 A511 No. B5.17-2000 | ||
AWS | Recommended Practices for the Brazing of Copper Pi | 1 | 1995 | 671.51 A511 No. D10.13-95 | ||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 1997 | 671.52 A511 No. D8.9-97 | ||
AWS | Specification for Zirconium and Zirconium Alloy Ba | 1 | 671.52 A511 No. A5.24-79 | |||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 671.51 A511 No. A5.7-84 | |||
AWS | Recommended Practices for Plasma Arc Cutting and G | 1 | 671.52 A511 No. C5.2-2001 | |||
AWS | Guide for Welding Fume Control | 1 | 671.52 A511 No. F3.1-89 | |||
ANSI | Application Guide for AC High-Voltage Circuit Brea | ANSI C37.010 | ||||
ANSI/ICC | Accessible and Usable Buildings and Facilities | 2 | ANSI/ICC A117.1-2003 | |||
AWS | Specification for Carbon Steel Filler Metals for G | 1 | 671.52 A511 No. A5.18-79 | |||
ANSI/NACE | Discontinuity (Holiday) Testing of New Protective | 1999 | ANSI/NACE RP0188 | |||
ANSI/ASME | Elevator and Escalator Electrical Equipment | 2004 | A17.5 – 2004 | |||
ANSI/ISO | Radiography of Welds and Viewing Conditions for Fi | 1973 | ANSI/ISO 2504 | |||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.5 – 1994 Mobile and Locom | ANSI/ASME B30.5a | ||||
ANSI/IEEE | IEEE Standard for Software Test Documentation (R19 | ANSI/IEEE 829 | ||||
ANSI | Graphical Symbols for Process Flow Diagrams in Pet | 1961 | ANSI Y32.11 | |||
ANSI/ASME | Pallet Sizes (R1996) | ANSI/ASME MH1.2.2M | ||||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1995 | ANSI/ASME B31.8 | |||
ANSI | Control Valve Seat Leakage | 1976 | ANSI B16.104 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | 1995 | ANSI/ASME B30.21a | |||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
ANSI/SAE/AS | Fitting, Elbow, 90, Internal Straight Thread Port | ANSI/SAE/AS 5190 | ||||
ANSI/ISO | Environmental Management – Environmental Performan | 2 | ANSI/ISO 14031 | |||
ANSI/MSS | Specification for High-Test, Wrought, Butt-Welding | 1 | 2008 | ANSI/MSS SP-75-2008 | ||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 1 | 2010 | ANSI/ASCE 7 | ||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | 1998 | ANSI/ASME B16.5a | |||
ANSI/ASME | Addenda to ANSI/ASME B16.34 – 1996 Valves – Flange | ANSI/ASME B16.34a | ||||
ANSI/AMS | Fusion Welding for Aerospace Applications | ANSI/AMS 2219 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-207-96 | ||
AWS | Specification for Stainless Steel Electrodes for S | 1 | 1992 | 671.51 A511 No. A5.4-92 | ||
AWS | Recommended Practices for Ultrasonic Inspection of | 1 | 1990 | 671.52 A511 no. C3.8-90 | ||
AWS | Specification for Filler Metals for Brazing and Br | 1 | 671.52 A511 No. A5.8-92 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10-90 | |||
AWS | Specification for Automotive Weld Quality - Arc We | 1 | 671.52 A511 No. D8.8M-2007 | |||
ANSI | Additional controls for Use with ANS Code for Info | ANSI X3.64 | ||||
ANSI/ASME | Pipe Flanges and Flanged Fittings | 1 | ANSI/ASME B16.5 – 2009 | |||
ANSI | Buttress Inch Screw Thread 7/45 Form (R2003) | ANSI B1.9 | ||||
API | Evaporative Loss from Low-Pressure Tanks | 1 | 665.5028 A51 No. 2516 | R1993 | ||
ANSI | Exit Devices | 1978 | ANSI A156.3 | |||
ANSI/ISO | Guidelines for Environmental Auditing – General Pr | 2 | 1996 | ANSI/ISO 14010 | ||
ANSI/BOMA | Standard Method for Measuring Floor Area in Office | 1996 | ANSI/BOMA Z65.1 | |||
ANSI/ASME | Refrigeration Piping and Heat Transfer Components | ANSI/ASME B31.5 | ||||
ANSI/ASME | Overhead Hoists (Underhung) | ANSI/ASME B30.16 | ||||
ANSI/ISO | Quality Management – Guidelines to Quality in Proj | ANSI/ISO 10006 | ||||
ANSI | For Plastic Lavatories | 1986 | ANSI Z124.3 |