The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Large Diameter Steel Flanges | 1990 | ANSI/ASME B16.47 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.003-90 | ||
ANSI/AMS | Rods, Sheets, and Molded Shapes, Polychlorotrifluo | ANSI/AMS 3650 Rev C | ||||
AWS | Specification for Nickel and Nickel-Alloy Welding | 1 | 1997 | 671.52 A511 No. A5.11/A5.11M-97 | ||
ANSI/ASME | Gages and Gaging for Metric M Screw Threads (R2001 | ANSI/ASME B1.16M | ||||
ANSI | For The Safe Use of Lasers | ANSI Z136.1 | ||||
ISO | Fitting, Union and Reducer, Flared | ANSI/SAE/AS 5174C | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | ANSI/ISO 14043 | ||||
API | Recommended Practice for Gas Lift System Design an | 658.5028 A51 no.11V8 | ||||
AWS | Recommended Safe Practices for Thermal Spraying | 1 | 1973 | 671.51 A511 No. C2.1-73 | ||
ISO | Fitting, Tee, Standard and Reducer, Bulkhead on Ru | ANSI/SAE/AS 1031E | ||||
ANSI/IEEE | IEEE Standard for Software Quality Assurance Plans | ANSI/IEEE 730.1 | ||||
AWS | Laboratory Method for Measuring Fume Generation Ra | 1 | 1999 | 671.52 A511 No. F1.2-99 | ||
ANSI/ASME | Knurling (R2003) | ANSI/ASME B94.6 | ||||
ANSI/SAE/AMS | Core, Flexible Honeycomb, Polyamide Paper Base, Ph | ANSI/SAE/AMS 3713D | ||||
AWS | Uniform Designation System of Oxyfuel Nozzles | 1 | 671.52 A511 No. C4.5M-2000 | |||
AWS | Guide for the Joining of Wrought Nickel-Based Allo | 1 | 671.52 A511 No. G2.1M/G2.1-2002 | |||
ANSI | For Materials Handling - Unit Loads and Transport | ANSI MH10.8M | ||||
ANSI | For Ladders – Fixed – Safety Requirements | ANSI A14.3 | ||||
ANSI/ASME | Process Piping | ANSI/ASME B31.3 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | ANSI/ASME B30.11a | ||||
AWS | Specification for Fluxes for Brazing and Braze Wel | 1 | 671.52 A511 No. A5.31-92 | |||
AWS | Structural Welding Code Sheet Steel | 1 | 671.51 A511 No. D1.3-81 | |||
ANSI/BHMA | Power Assist and Low-Energy Power-Operated Doors | 2007 | ANSI/BHMA A156.19 | |||
ANSI/ASME | Manually Lever Operated Hoists | 1 | 2005 | ANSI/ASME B30.21 | ||
ANSI/ISO/DIS | Environmental Management – Life Cycle Assessment – | 1997 | ANSI/ISO/DIS 14041 | |||
ANSI/IEEE | IEEE Standard for Software Test Documentation (R19 | 1983 | ANSI/IEEE 829 | |||
AWS | Specification for Titanium and Titanium Alloy Weld | 1 | 671.52 A511 No. A5.16-90 | |||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | 2000 | ANSI/ASME NQA – 1 | |||
ANSI/ASME | Process Piping | 2 | 2004 | ANSI/ASME B31.3 | ||
ANSI | For The Safe Use of Lasers | 1986 | ANSI Z136.1 | |||
ANSI | Industrial Security for Nuclear Power Plants | 1973 | ANSI N18.17 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1985 Side Boom Tract | 1990 | ANSI/ASME B30.14d | |||
API | Metals Criteria for Land Management of Exploration | 1 | 1995 | 665.5028 A51 No. 4600 | ||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | 2002 | ANSI/ASME A17.3 | |||
ISO | Specification for Low Alloy Steel Filler Metals fo | 1 | 1979 | 671.52 A511 No. A5.28-79 | ||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
ANSI | Reference Designations for Electrical and Electron | ANSI Y32.16 | ||||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | ANSI/UL 103 | ||||
ANSI/NFOPA | National Design Specifications for Wood Constructi | ANSI/NFOPA NDS | ||||
AWS | Structural Welding Code Reinforcing Steel | 1 | 1998 | 671.51 A511 No. D1.4-98 | ||
ANSI/BHMA | Power Operated Pedestrian Doors | 1 | ANSI/BHMA A156.10-2011 | |||
ANSI/ISO | Quality Systems – Model for Quality Assurance in P | ANSI/ISO 9002 | ||||
AWS | Recommended Practices for Automotive Portable Gun | 1 | 1966 | 671.52 A511 No. D8.5-66 | ||
ANSI/SAE/AMS | Carburizing and Heat Treatment of Carburizing Grad | ANSI/SAE/AMS 2759/7A | ||||
ANSI/AWWA | Steel Water Pipe – 6 in. (150 mm) and larger | ANSI/AWWA C110/A21.10 | ||||
ANSI | Construction and Demolition Operations – Scaffoldi | 1988 | ANSI A10.8 | |||
AWS | Specification for Automotive Frame Weld Quality - | 1 | 671.52 A511 No. D8.8-79 | |||
ANSI | Graphic Symbols for Electrical and Electronics Dia | ANSI Y32.2 | ||||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1 | ANSI/ASME CSD-1-2009 |