The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/AAMA | Voluntary Specifications for Aluminum Combination | 1980 | ANSI/AAMA 1002.10 | |||
ISO | Specification for Carbon and Low Alloy Steel Elect | 1 | 671.52 A511 No. A5.25-91 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1-84 | |||
ANSI/SAE/AS | Adhesive, Film Form, Metallic Structural Sandwich | ANSI/SAE/AS A – 25463 | ||||
ANSI/ISO | Quality Management—Guidelines for Training | ANSI/ISO 10015 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | 1984 | ANSI/ASME B31.8a | |||
ANSI/BOMA | Standard Method for Measuring Floor Area in Office | ANSI/BOMA Z65.1 | ||||
ANSI/ASME | Safety Standard for Low Lift and High Lift Trucks | ANSI/ASME B56.1 | ||||
AWS | Specification for Welding Electrodes and Rods for | 1 | 671.52 A511 No. A5.15-90 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-210-96 | ||
AWS | Specification for Copper and Copper Alloy Covered | 1 | 1976 | 671.51 A511 No. A5.6-76 | ||
ANSI | For Safe Use of Lasers in Health Care Facilities | 2005 | ANSI Z136.3 | |||
ANSI | Protective Coatings (Paints) for the Nuclear Indus | 1974 | ANSI N512 | |||
AWS | Recommended Practices for Stud Welding | 1 | 1993 | 671.52 A511 No. C5.4-93 | ||
AWS | Recommended Safe Practice for Electron Beam Weldin | 1 | 1978 | 671.52 A511 No. F2.1-78 | ||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
ANSI/ISO | Non-Destructive Testing of Welds-Radiographic Test | 2003 | ANSI/ISO 17636 | |||
ANSI/IEEE | IEEE Recommended Practice for Maintenance, Testing | 1987 | ANSI/IEEE 450 | |||
AWS | Guide for Steel Hull Welding | 1 | 671.52 A511 No. D3.5-76 | |||
AWS | Structural Welding Code - Sheet Steel | 1 | 671.52 A511 No. D1.3-98 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | ANSI/ASME B30.21a | ||||
ANSI/SAE | Airspeed Tubes Electrically Heated | 1 | ANSI/SAE AS 393B-2008 | |||
ANSI/SAE/AS | Quality Systems – Aerospace – Model for Quality As | 2001 | ANSI/SAE/AS 9100A | |||
ANSI/ASME | Buttwelding Ends | ANSI/ASME B16.25 | ||||
ANSI/ACI | Evaluating the Performance of Post-Installed Mecha | ANSI/ACI 355.2/355.2R | ||||
ANSI/ASME | Monorails and Underhung Cranes | 1998 | ANSI/ASME B30.11 | |||
ANSI/ASHRAE | Method of Testing the Performance of Cool Storage | 2000 | ANSI/ASHRAE 150-2000 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | 1998 | ANSI/ASME A17.1b | |||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 671.52 A511 No. A5.10-88 | |||
CAN/CSA | North American Specification for the Design of Col | CAN/CSA S136-01 | ||||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 671.51 A511 No. D10.8-78 | |||
ANSI/KCMA | Recommended Performance and Construction Standards | ANSI/KCMA A161.1 | ||||
ANSI/ASME | Safety Standard for Operator Controlled Industria | 1992 | ANSI/ASME B56.9 | |||
ANSI/ASME | Interpretations – ASME B31.1 No. 14 Cases No. 9, | ANSI/ASME B31.1 | ||||
ANSI/ISO | Radiography of Welds and Viewing Conditions for Fi | ANSI/ISO 2504 | ||||
ANSI/ASQC | Quality Management and Quality Assurance Standards | ANSI/ASQC Q90 | ||||
ANSI | Acceptance Testing Specifications for Electrical P | ATS-2007 | ||||
AWS | Specification for Carbon Steel Electrodes and Rods | 1 | 2001 | 671.52 A511 No. A5.18/A5.18M-2001 | ||
AWS | Specification for the Qualification of Welding Ins | 1 | 2001 | 671.52 A511 No. B5.2-2001 | ||
ANSI | Fundamentals Governing the Design and Operation of | 1979 | ANSI Z9.2 | |||
ANSI | Thread Forming and Thread Cutting Tapping Screws a | 1981 | ANSI B18.6.4 | |||
AWS | Guide for Welding Iron Castings | 1 | 1989 | 671.51 A511 No. D11.2-89 | ||
AWS | Railroad Welding Specification - Cars and Locomoti | 1 | 1993 | 671.52 A511 No. D15.1-93 | ||
ANSI | Procedures for the Use of the Communication Contro | ANSI X3.28 | ||||
ANSI | Tree, Shrub and Other Woody Plant Maintenance - St | ANSI A300 | ||||
ANSI/ISO | Quality Management Systems – Requirements | 2000 | ANSI/ISO 9001 | |||
ANSI/AWWA | Ductile Iron and Gray-Iron Fittings, 3 in. Through | 1982 | ANSI/AWWA C110/A21.10 | |||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 671.52 A511 No. F1.1-92 |