The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Procedures for the Use of the Communication Contro | ANSI X3.28 | ||||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
ANSI | Tree, Shrub and Other Woody Plant Maintenance - St | ANSI A300 | ||||
ANSI/ISO/DIS | Environmental Management – Vocabulary | ANSI/ISO/DIS 14050 | ||||
AWS | Specification for Welded Joints in Machinery and E | 1 | 671.52 A511 No. D14.4-97 | |||
AWS | Effects of Welding on Health VII | 1 | 671.52 A511 No. EWH7-89 | |||
ANSI/ASME | Safety Standard for Operator Controlled Industria | 1992 | ANSI/ASME B56.9 | |||
ANSI/ASME | Interpretations – ASME B31.1 No. 14 Cases No. 9, | ANSI/ASME B31.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1989 Liquid Transport | ANSI/ASME B31.4a | ||||
ANSI/ISO | Petroleum and Natural Gas Industries-Design and Op | 2002 | ANSI/ISO 13628-8 | |||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
ANSI/BHMA | Power Operated Pedestrian Doors | 1999 | ANSI/BHMA A156.10 | |||
ANSI/ASME | Addenda to ANSI/ASCME A39.1 – 1991 – Safety Requir | ANSI/ASME A39.1a | ||||
ANSI | For Safety Glazing Materials Used in Buildings – S | ANSI Z97.1 | ||||
ANSI/IEEE | IEEE Recommended Practice for Energy Conservation | ANSI/IEEE 739 | ||||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | ANSI/ASME CSD-1 | ||||
ANSI/ASHRAE | Method of Testing the Performance of Cool Storage | 2000 | ANSI/ASHRAE 150-2000 | |||
AWS | Bridge Welding Code | 1 | 1988 | 671.51 A511 No. D1.5-88 | ||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 2002 | 671.52 A511 No. C2.20/C2.20M-2002 | ||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
AWS | Specification for Nickel and Nickel-Alloy Bare Wel | 2 | 1997 | 671.52 A511 No. A5.14/A5.14M-97 | ||
AWS | Specification for Welding Procedure and Performanc | 1 | 2000 | 671.52 A511 No. B2.1-2000 | ||
AWS | Specification for Welding Electrodes and Rods for | 1 | 671.52 A511 No. A5.15-90 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 2001 | ANSI/ASME B30.2 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | 1998 | ANSI/ASCE 7 | ||
AWS | Standard for Brazing Procedure and Performance Qua | 1 | 671.52 A511 No. B2.2-91 | |||
AWS | Guide for the Gas Shielded Arc Welding of Aluminum | 1 | 671.51 A511 No. D10.7M/D10.7-2000 | |||
ANSI | Acceptance Testing Specifications for Electrical P | ATS-2007 | ||||
ANSI | Fundamentals Governing the Design and Operation of | 1979 | ANSI Z9.2 | |||
ANSI | Thread Forming and Thread Cutting Tapping Screws a | 1981 | ANSI B18.6.4 | |||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
ANSI/SAE/AMS | Steel Bars, Forgings, and Tubing 0.15-0.20C (SAE 1 | ANSI/SAE/AMS 2069F | ||||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
AWS | Recommended Practices for Electrogas Welding | 1 | 671.52 A511 No. C5.7-2000 (R2006) | |||
AWS | Standard for Accreditation of Test Facilities for | 1 | 671.52 A511 No. QC4-89 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | 1984 | ANSI/ASME B31.8a | |||
ANSI/MSS | Quality Standard for Steel Castings for Valves, Fl | 1999 | ANSI/MSS SP-54 | |||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI/ISA | Instrumentation Symbols and Identification (R1992) | 1984 | ANSI/ISA S5.1 | |||
ANSI/ARI | Standard for Water Source Heat Pumps | ANSI/ARI 320 | ||||
ANSI/ISO | Quality Systems – Guidelines for Performance Impro | ANSI/ISO 9004 | ||||
ANSI/AWWA | Coal-Tar Protective Coatings and Linings for Steel | ANSI/AWWA C203 | ||||
ANSI/ASME | Large Diameter Steel Flanges NPS 26 Through NPS 60 | 1 | 2006 | ANSI/ASME B16.47 | ||
ANSI/ASME | Slings | 1 | 2010 | ANSI/ASME B30.9-2010 | ||
AWS | Recommended Practices for Metallizing with Aluminu | 1 | 1967 | 671.51 A511 No. C2.2-67 | ||
AWS | Sampling Strategy Guide for Evaluating Contaminant | 1 | 1991 | 671.52 A511 No. F1.3-91 | ||
ANSI/ASME | Valves-Flanged Threaded and Welding End | ANSI/ASME B16.34-2009 | ||||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 B2.1-1-202-96 |