The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition | Call Number Sort ascending | Notes |
---|---|---|---|---|---|---|
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Fin | ANSI/ASQC Q9003 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Pro | 1994 | ANSI/ASQC Q9002 | |||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Pro | ANSI/ASQC Q9002 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Des | 1994 | ANSI/ASQC Q9001 | |||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Des | ANSI/ASQC Q9001 | ||||
ANSI/ASQC | Quality Management and Quality Assurance Standards | 1994 | ANSI/ASQC Q9000-1 | |||
ANSI/ASQC | Quality Management and Quality Assurance Standards | ANSI/ASQC Q9000-1 | ||||
ANSI/ASQC | Quality Management and Quality Assurance Standards | ANSI/ASQC Q90 | ||||
ANSI/ASQC | Quality Management and Quality Assurance Standards | 1987 | ANSI/ASQC Q90 | |||
ANSI/ASQC | Specification of General Requirements for a Qualit | ANSI/ASQC C1 | ||||
ANSI/ASQC | Specification of General Requirements for a Qualit | 1985 | ANSI/ASQC C1 | |||
ANSI/ASNT | Qualification and Certification of Nondestructive | ANSI/ASNT CP-189 | ||||
ANSI/ASNT | Qualification and Certification of Nondestructive | 2001 | ANSI/ASNT CP-189 | |||
ANSI/ASNT | Qualification and Certification of Nondestructive | 1 | 2011 | ANSI/ASNT CP-189 | ||
ANSI/ASNT | Topical Outlines for Qualification of Nondestructi | 1 | 2011 | ANSI/ASNT CP-105 | ||
ANSI/ASME | Dimensioning and Tolerancing (R1999) | 2 | ANSI/ASME Y14.5M | |||
ANSI/ASME | Dimensioning and Tolerancing (R1999) | 2 | 1994 | ANSI/ASME Y14.5M | ||
ANSI/ASME | Dimensioning and Tolerancing | 1 | 2009 | ANSI/ASME Y14.5-2009 | ||
ANSI/ASME | Revision of Engineering Drawings and Assorted Docu | ANSI/ASME Y14.35M | ||||
ANSI/ASME | Revision of Engineering Drawings and Assorted Docu | 1997 | ANSI/ASME Y14.35M | |||
ANSI/ASME | Certification of Geometric Dimensioning and Tolera | ANSI/ASME Y 14.5.2 | ||||
ANSI/ASME | Certification of Geometric Dimensioning and Tolera | 2000 | ANSI/ASME Y 14.5.2 | |||
ANSI/ASME | Quality Assurance and Certification of Safety and | ANSI/ASME SPPE-1 | ||||
ANSI/ASME | Quality Assurance and Certification of Safety and | 1988 | ANSI/ASME SPPE-1 | |||
ANSI/ASME | Standard for the Qualification of Elevator Inspect | 1 | 2010 | ANSI/ASME QEI-1-2010 | ||
ANSI/ASME | Standard for the Qualification of Elevator Inspect | 1 | 2007 | ANSI/ASME QEI-1-2007 | ||
ANSI/ASME | Steam Generating Units – Performance Test Code (R1 | ANSI/ASME PTC4.1 | ||||
ANSI/ASME | Steam Generating Units – Performance Test Code (R1 | 1964 | ANSI/ASME PTC4.1 | |||
ANSI/ASME | Pressure Relief Devices | 1 | 2008 | ANSI/ASME PTC 25-2008 | ||
ANSI/ASME | Test Code on Compressors and Exhausters | 1 | ANSI/ASME PTC 10 – 1997(R2009) | |||
ANSI/ASME | Test Code on Compressors and Exhausters | 1 | 2009 | ANSI/ASME PTC 10 – 1997(R2009) | ||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA---1a | ||||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | 2002 | ANSI/ASME NQA---1a | |||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA – 1 | ||||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | 2000 | ANSI/ASME NQA – 1 | |||
ANSI/ASME | Qualifications and Duties for Authorized Nuclear I | ANSI/ASME N626 | ||||
ANSI/ASME | Qualifications and Duties for Authorized Nuclear I | 1985 | ANSI/ASME N626 | |||
ANSI/ASME | Nuclear Power Plant Air Cleaning Units and Compone | ANSI/ASME N509 | ||||
ANSI/ASME | Nuclear Power Plant Air Cleaning Units and Compone | 1980 | ANSI/ASME N509 | |||
ANSI/ASME | Quality Assurance Program Requirements for Nuclear | ANSI/ASME N45.2 | ||||
ANSI/ASME | Quality Assurance Program Requirements for Nuclear | 1977 | ANSI/ASME N45.2 | |||
ANSI/ASME | Pallet Sizes (R1996) | ANSI/ASME MH1.2.2M | ||||
ANSI/ASME | Pallet Sizes (R1996) | 1989 | ANSI/ASME MH1.2.2M | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | ANSI/ASME CSD-1b | ||||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1b | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | ANSI/ASME CSD-1a | ||||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1 | ANSI/ASME CSD-1-2009 | |||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1 | 2009 | ANSI/ASME CSD-1-2009 | ||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | ANSI/ASME CSD-1 |