The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
ANSI | Addenda to ANS Z21.10.3 - 1987 for Gas Water Heate | 1988 | ANSI Z21.10.3a | |||
ANSI/ASME | Gauges – Pressure Indicating Dial Type – Elastic E | 1991 | ANSI/ASME B40.1 | |||
ANSI | Floating Cranes and Floating Derricks | 1982 | ANSI B30.8 | |||
ANSI/ASME | Addenda to Power Piping | 1992 | ANSI/ASME B31.1a | |||
AWS | Specification for Carbon Steel Electrodes and Flux | 1 | 1989 | 671.52 A511 No. A5.17-89 | ||
AWS | Specification for the Qualification of Welding Eng | 1 | 2001 | 671.52 A511 No. B5.16-2001 | ||
ANSI/IEEE | IEEE Guide to Software Requirements Specifications | ANSI/IEEE 830 | ||||
ANSI/ASME | Quality Assurance Program Requirements for Nuclear | ANSI/ASME N45.2 | ||||
AWS | Recommended Practices for Air Carbon Arc Gouging a | 1 | 671.52 A511 No. C5.3-91 | |||
AWS | Specification for Use and Performance of Transpare | 1 | 671.52 A511 No. F2.3M-2001 | |||
AWS | Gas Tungsten-Arc Welding of Titanium Piping and Tu | 1 | 1973 | 671.51 A511 No. D10.6-73 | ||
AWS | Guide for Welding Mild Steel Pipe | 1 | 2000 | 671.52 A511 No. D10.12M/D10.12-2000 | ||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | 1991 | ANSI/ASME B30.2a | |||
ANSI/ARI | Standard for Central-Station Air-Handling Units | 1989 | ANSI/ARI 430 | |||
ANSI/ASME | Interpretations—ANSI/ASME A17.3 – No. 1, 4 | ANSI/ASME A 17.3 | ||||
ANSI | Gas Food Service Equipment – Baking and Roasting O | ANSI Z83.12 | ||||
AWS | Filler Metal Comparison Charts | 1 | 1993 | 671.52 A511 No. FMC-93 | ||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | 1 | 2011 | ANSI/ASME A17.3-2011 | ||
ISO | Fitting, Elbow, 90 Standard and Reducer Flared | ANSI/SAE/AS 1034E | ||||
ANSI/ASNT | Qualification and Certification of Nondestructive | 1 | 2011 | ANSI/ASNT CP-189 | ||
AWS | Standard Symbols for Welding, Brazing, and Nondest | 1 | 671.52 A511 No. A2.4-2007 | |||
ANSI/SAE/AS | Nut, Fitting, Port | ANSI/SAE/AS 5179A | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2 | ANSI/ISO 14040 | |||
ANSI | Safety Requirements for Electrical and Electronic | ANSI C39.5 | ||||
ANSI/NACE | Fabrication Details, Surface Finish Requirements a | 2003 | ANSI/NACE RP0178 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
ANSI/NSPI | Residential Inground Swimming Pools | 2003 | ANSI/NSPI 5 - 2003 | |||
ANSI/ISO | Microcopying – ISO Test Chart No. 2-Description an | 1979 | ANSI/ISO 3334 | |||
AWS | Standard Methods for Mechanical Testing of Welds | 1 | 671.52 A511 No. B4.0M-2000 | |||
AWS | Recommended Practices for Gas Tungsten Arc Welding | 1 | 671.51 A511 No. D10.6/D10.6-2000 | |||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
API | Impact Assessment of New Data on the Validity of A | 1 | 1992 | 665.5028 A51 No. 2524 | R2001 | |
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | ANSI/ASME B30.2 | ||||
ANSI | For Emergency Eyewash and Shower Equipment | 1990 | ANSI Z358.1 | |||
ANSI/ASME | Revision of Engineering Drawings and Assorted Docu | 1997 | ANSI/ASME Y14.35M | |||
ANSI | Criteria for Permissible Ambient Noise During Audi | 1977 | ANSI S3.1 | |||
ANSI/ASME | Liquid Transportation Systems for Hydrocarbons, Li | 1992 | ANSI/ASME B31.4 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-206-96 | ||
AWS | Specification for Covered Corrosion-Resisting Chro | 1 | 1981 | 671.51 A511 No. A5.4-81 | ||
ANSI/ISO | Quality Management Systems – Guidelines for Qualit | 2 | ANSI/ISO 10006 | |||
ANSI/AWWA | Installation of Ductile Iron Water Mains and their | ANSI/AWWA C600 | ||||
AWS | Sheet Metal Welding Code | 1 | 671.52 A511 No. D9.1M/D9.1-2006 | |||
ANSI/ASHRAE/ACCA | Peak Cooling and Heating Load Calculations in Buil | 1 | ANSI/ASHRAE/ACCA 183 – 2007 | |||
AWS | Recommended Practices for Friction Welding | 1 | 1989 | 671.52 A511 No. C6.1-89 | ||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1996 Side Boom Tract | 1997 | ANSI/ASME B30.14a | |||
AWS | Sampling Strategy Guide for Evaluating Contaminant | 1 | 1999 | 671.52 A511 No. F1.3-99 | ||
ANSI/ASME | Safety Standard for Belt Manlifts | 1985 | ANSI/ASME A90.1 | |||
ANSI/ASME | Large Diameter Steel Flanges | ANSI/ASME B16.47 | ||||
AWS | Standard for Accreditation of Test Facilities for | 1 | 1989 | 671.52 A511 No. QC4-89 |