The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Specification for Carbon Steel Electrodes for Shie | 1 | 1991 | 671.51 A511 No. A5.1-91 | ||
ANSI/ASME | Managing System Integrity of Gas Pipelines | ANSI/ASME B31.8s | ||||
ANSI/ASME | Manual for Determining the Remaining Strength of C | ANSI/ASME B31G | ||||
ISO | Specification for Low Alloy Steel Filler Metals fo | 1 | 671.52 A511 No. A5.28-79 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1/D1.1M-2004 | |||
ANSI/ISO/TR | Environmental Labels and Declarations—Type III Env | 2000 | ANSI/ISO/TR 14025 | |||
ANSI/IESNA | Lighting for Exterior Environments | ANSI/IESNA RP-33-99 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1998 Overhead Hoists | 2001 | ANSI/ASME B30.16a | |||
ANSI/ISO | Industrial Fans-Performance Testing Using Standard | 1 | 2007 | ANSI/ISO 5801 – 2007 | ||
ANSI | Gear and Spline Drawing Standards Part 2 – Bevel a | ANSI Y14.7.2 | ||||
ANSI/ASME | Pipe Threads, General Purpose (inch) (R1992, 2001) | 3 | 1983 | ANSI/ASME | ||
Carbon Steel, Sheet, Strip and Plate | 1 | ANSI/SAE/AMS 5046B | ||||
ANSI | Roll Forming and Roll Bending Machines-Safety Requ | ANSI B11.12 | ||||
AWS | Recommended Practices for Electrogas Welding | 1 | 2000 | 671.52 A511 No. C5.7-2000 (R2006) | ||
AWS | Standard for Accreditation of Test Facilities for | 1 | 1989 | 671.52 A511 No. QC4-89 | ||
ANSI/SAE/AS | Fitting, Tee, Standard and Reducer, Bulkhead on R | ANSI/SAE/AS 1032E | ||||
ANSI/ISO/TR | Environmental Management—Life Cycle Assessment—Exa | ANSI/ISO/TR 14049 | ||||
AWS | Recommended Practices for Automotive Portable Gun | 1 | 671.52 A511 No. D8.5-66 | |||
AWS | Classification and Application of Welded Joints fo | 1 | 671.52 A511 No. D14.4-77 | |||
ANSI | Exit Devices | 1978 | ANSI A156.3 | |||
ANSI/ASME | Pallet Sizes (R1996) | 1989 | ANSI/ASME MH1.2.2M | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1996 Process Piping | 1996 | ANSI/ASME B31.3a | |||
NEMA | Motors and Generators | NEMA MG1-2010 | ||||
ANSI/SAE/AS | Aerospace Basic Quality System | ANSI/SAE/AS 9000 | ||||
ANSI | For Plastic Shower Receptors and Shower Stalls | 1987 | ANSI Z124.2 | |||
ANSI/IPC | Acceptability of Electronic Assemblies | ANSI/IPC A-610D | ||||
ANSI | For Materials Handling - Unit Loads and Transport | 1993 | ANSI MH10.8M | |||
ANSI/ASME | Quality Assurance and Certification of Safety and | ANSI/ASME SPPE-1 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-001-90 | |||
ANSI/ASME | Backwater Valves | ANSI/ASME A112.14.1 | ||||
ANSI | For Plastic Bathtub Units | ANSI Z124.1 | ||||
AWS | Specification for Nickel and Nickel Alloy Bare Wel | 1 | 1983 | 671.52 A511 No. A5.14-83 | ||
AWS | Specification for Welding Procedure and Performanc | 1 | 1998 | 671.52 A511 No. B2.1-98 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1999 Process Piping | ANSI/ASME B31.3a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1998 Monorails and U | ANSI/ASME B03.11a | ||||
AWS | Specification for Tungsten and Tungsten-Aloy Elect | 1 | 671.52 A511 No. A5.12/A5.12M-98 | |||
AWS | Flame Spraying of Ceramics | 1 | 671.51 A511 No. C2.13-70 | |||
ANSI/ISO | Guidelines for Auditing Quality Systems – Part 2: | 1991 | ANSI/ISO 10011-2 | |||
ANSI/AWWA | AWWA Standard for Welded Steel Tanks for Water Sto | 1996 | ANSI/AWWA D100 | |||
AWS | Classification and Application of Welded Joints fo | 1 | 1977 | 671.52 A511 No. D14.4-77 | ||
ANSI/ASME | Addenda to ANSI/ASME B30.5 – 1994 Mobile and Locom | 1995 | ANSI/ASME B30.5a | |||
ANSI | National Fuel Gas Code | 1 | 2009 | ANSI Z223.1-2009 | ||
ANSI | Dimensional Tolerances for Aluminum Mill Products | ANSI H35.2 | ||||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | 1989 | ANSI/ASHRAE 15 | |||
ANSI | Basic Elements of an Employer Program to Provide a | ANSI A10.38 | ||||
AWS | Sheet Metal Welding Code | 1 | 1990 | 671.51 A511 No. D9.1-0 | ||
AWS | Specification for Metal Cutting Machine Tool Weldm | 1 | 1993 | 671.52 A511 No. D14.2-93 | ||
ANSI/SAE/AMS | Heat Treatment of Wrought Aluminum Alloy Parts | ANSI/SAE/AMS 2770G | ||||
AWS | Laboratory Method for Measuring Fume Generation Ra | 1 | 671.52 A511 No. F1.2-79 | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | 2008 | ANSI/ASME A17.3 – 2008 |