The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ISO | Guidelines for Auditing Quality Systems – Part 1: | ANSI/ISO 10011-1 | ||||
ANSI/AWWA | AWWA Standard for Welded Steel Tanks for Water St | ANSI/AWWA D100 | ||||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
AWS | Structural Welding Code Steel | 1 | 1988 | 671.51 A511 No. D1.1-88 | ||
ANSI | Reference Designations for Electrical and Electron | ANSI Y32.16 | ||||
AWS | Specification for Aluminum Brazing | 1 | 1999 | 671.52 A511 No. C3.7-99 | ||
ANSI | Wing Nuts, Thumb Screws, and Wing Screws (R1983) | ANSI B18.17 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | 1990 | ANSI/ASME B30.11b | |||
ANSI/IEEE | IEEE Recommended Practice for Grounding of Industr | ANSI/IEEE 142 – 2007 | ||||
ANSI/ASME | Safety Code for Elevators and Escalators | 1996 | ANSI/ASME A17.1 | |||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | ANSI/UL 103 | ||||
ANSI/NFOPA | National Design Specifications for Wood Constructi | ANSI/NFOPA NDS | ||||
AWS | Risk Assessment Guide for robotic Arc Welding | 1 | 2001 | 671.52 A511 No. D16.3M/D16.3-2001 | ||
ANSI/ASME | Managing System Integrity of Gas Pipelines | 2010 | ANSI/ASME B31.8S-2010 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.013-91 | |||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 671.52 A511 No. C4.2-90 | |||
AWS | International Filler Metal Specifications Cross Re | 1 | 671.52 A511 No. IFS-87 | |||
AWS | Specification for Fluxes for Brazing and Braze Wel | 1 | 671.52 A511 No. A5.31-92 | |||
AWS | Structural Welding Code Sheet Steel | 1 | 671.51 A511 No. D1.3-81 | |||
AWS | Specification for Carbon Steel Electrodes for Flux | 1 | 1979 | 671.52 A511 No. A5.20-79 | ||
ANSI/ASHRAE | Ventilation and Acceptable Indoor Air Quality in L | ANSI/ASHRAE 62.2-2010 | ||||
AWS | Specification for Filler Metals for Brazing and Br | 1 | 1992 | 671.52 A511 No. A5.8-92 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | ANSI/ASME B31.8b | ||||
ANSI/SAE/AS | Fitting End, Bulkhead Flareless, Design Standard | ANSI/SAE/AS 4377C | ||||
ANSI/ASME | Below the Hook Lifting Devices | ANSI/ASME B30.20 | ||||
ANSI/ASME | Managing System Integrity of Gas Pipelines | 2001 | ANSI/ASME B31.8s | |||
ANSI/SAE/AS | Identification Marking Methods | ANSI/SAE/AS 478N | ||||
ANSI | Graphic Symbols for Grid and Mapping Diagrams Used | 1976 | ANSI Y32.21 | |||
ANSI/ASME | Manual for Determining the Remaining Strength of C | 1991 | ANSI/ASME B31G | |||
ANSI | Socket Cap, Shoulder and Set Screws - Inch Series | 1976 | ANSI B18.3 | |||
ANSI/ISO/DIS | Environmental Management – Life Cycle Assessment – | 1997 | ANSI/ISO/DIS 14041 | |||
All The Things You Are | from Very Warm For May Lyrics by Oscar Hammerstein II Music by Jerome Kern |
|||||
ANSI/IEEE | IEEE Standard for Software Test Documentation (R19 | 1983 | ANSI/IEEE 829 | |||
ANSI/ASME | Guide for Emergency Personnel | 1999 | ANSI/ASME A17.4-1999 | |||
ANSI/IEEE | Metal-Enclosed Low-Voltage Power Circuit-Breaker S | ANSI/IEEE C37.20.1 | ||||
ANSI/ASME | Qualifications and Duties for Authorized Nuclear I | ANSI/ASME N626 | ||||
ANSI/ASME | Stub Acme Screw Threads (R2001) | ANSI/ASME B1.8 | ||||
ANSI | For Arboricultural Operations - Pruning, Repairing | ANSI Z133.1 | ||||
AWS | Sheet Metal Welding Code | 1 | 2000 | 671.51 A511 No. D9.1M/D9.1-2000 | ||
ANSI | Methylene Blue Method for Measuring Thiosulfate an | ANSI PH4.8 | ||||
AWS | Standard for Automotive Resistance Spot Welding El | 1 | 1977 | 671.52 A511 No. D8.6-77 | ||
ANSI | Buildings and Facilities - Providing Accessibility | ANSI A117.1 | ||||
ANSI/ASME | Forged Fittings, Socket-Welding and Threaded… | 1991 | ANSI/ASME B16.11 | |||
ANSI | Product Safety Signs and Labels | 2002 | ANSI Z535.4 | |||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | ANSI/ISO 14041 | ||||
ANSI/AWWA | Protective Interior Coatings for Valves and Hydran | 1 | 2005 | ANSI/AWWA C550 – 2005 | ||
ANSI/ASME | Addenda to ANSI/ASME SPPE-1-1998 Quality Assurance | 1 | SPPE-1a-1b-1c-1d | |||
AWS | Standard Symbols for Welding, Brazing, and Nondest | 2 | 671.52 A511 No. A2.4-98 | |||
AWS | Recommended Practices for Automotive Weld Quality | 1 | 671.52 A511 No. D8.7-88 |