The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/AWWA | AWWA Standard for Inspecting and Repairing Steel W | ANSI/AWWA D101 | ||||
ANSI/SAE | Assembly, Installation and Torque for Flareless an | 1 | 2005 | ANSI/SAE AS 5148 –1998(R2005) | ||
ANSI/ASME | Process Piping | 1 | 2012 | ANSI/ASME B31.3 | ||
ANSI | Overhead and Gantry Cranes | ANSI B30.2.0 | ||||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 2007 Safety Code for | ANSI/ASME A17.1a – 2008 | ||||
ANSI/ISO | Quality Management Systems – Requirements | 2000 | ANSI/ISO 9001 | |||
ANSI/AWWA | Ductile Iron and Gray-Iron Fittings, 3 in. Through | 1982 | ANSI/AWWA C110/A21.10 | |||
ANSI/ASME | Safety Code for Elevators and Escalators | 2007 | A17.1 - 2007 | |||
AWS | Recommended Practices for Ultrasonic Inspection of | 1 | 671.52 A511 no. C3.8-90 | |||
AWS | Guide for the Evaluation of Hot Gas, Hot Gas Extru | 1 | 671.52 A511 No. G1.10M-2001 | |||
ANSI/ASME | Buttwelding Ends | ANSI/ASME B16.25 | ||||
ANSI/ACI | Evaluating the Performance of Post-Installed Mecha | ANSI/ACI 355.2/355.2R | ||||
AWS | Specification for Welding Industrial and Mill Cran | 1 | 1970 | 671.51 A511 No. D14.1-70 | ||
AWS | Structural Welding Code Stainless Steel | 1 | 1999 | 671.52 A511 no. D1.6-99 | ||
CAN/CSA | North American Specification for the Design of Col | CAN/CSA S136-01 | ||||
ANSI/KCMA | Recommended Performance and Construction Standards | ANSI/KCMA A161.1 | ||||
ANSI/ASME | Pipe Flanges and Flanged Fittings | 1988 | ANSI/ASME B16.5 | |||
ANSI/SAE/AS | Packing, Preformed-O-Ring Seal | ANSI/SAE/AS 3582 (R2006) | ||||
AWS | Standard for Brazing Procedure and Performance Qua | 1 | 671.52 A511 No. B2.2-91 | |||
ANSI | Engineering Method for the Determination of Sound | 1992 | ANSI S12.12 | |||
ANSI/ASQC | Quality Systems – Model for Quality Assurance in D | 1987 | ANSI/ASQC Q91 | |||
AWS | Guide for the Gas Shielded Arc Welding of Aluminum | 1 | 671.51 A511 No. D10.7M/D10.7-2000 | |||
ANSI/ASME | Refrigeration Piping | 1987 | ANSI/ASME B31.5 | |||
ANSI/ASME | Valves-Flanged Threaded and Welding End | ANSI/ASME B16.34-2009 | ||||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
AWS | Specification for Magnesium Alloy Welding Electrod | 1 | 671.52 A511 No. A5.19-92 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.002-90 | ||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 1983 | 671.52 A511 No. A5.11-83 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | ANSI/ASME B31.5c | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1987 Overhead Hoists | ANSI/ASME B30.16a | ||||
ANSI/IESNA | Lighting for Exterior Environments | ANSI/IESNA RP-33-99 | ||||
AWS | Specification for Welding Earthmoving and Construc | 1 | 2000 | 671.52 A511 No. D14.3/D14.3M-2000 | ||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA---1a | ||||
ANSI/ASHRAE | Designation and Safety Classification of Refrigera | 1 | 2010 | ANSI/ASHRAE 34a-o-2010 | ||
ANSI | Survey Methods for Determination of Sound Power Le | ANSI S1.36 | ||||
ANSI | Specifications for Ceramic Tiles | ANSI A137.1 | ||||
ANSI/ISO | Non-Destructive Testing of Welds-Radiographic Test | 2003 | ANSI/ISO 17636 | |||
ANSI/IEEE | IEEE Recommended Practice for Maintenance, Testing | 1987 | ANSI/IEEE 450 | |||
ANSI | Test Procedure and Acceptance Criteria for Physica | 1980 | ANSI A151.1 | |||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 671.52 A511 No. D8.9-97 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | ANSI/ASME B30.2 – 2005 | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 | ||||
ANSI | Personal Protection – Protective Footwear | ANSI Z41 | ||||
AWS | Process Specification for Electron Beam Welding | 1 | 1999 | 671.52 A511 No. C7.3-99 | ||
AWS | Recommended Safe Practices for the Preparation for | 1 | 1999 | 671.52 A511 No. F4.1-99 | ||
ANSI/SAE/AS | Adhesive, Film Form, Metallic Structural Sandwich | ANSI/SAE/AS A – 25463 | ||||
ANSI/ISO | Quality Management—Guidelines for Training | ANSI/ISO 10015 | ||||
ANSI/ASME | Floating Cranes and Floating Derricks | 2004 | ANSI/ASME B30.8 | |||
ANSI/ASHRAE/IESNA | Energy Standard for Buildings Except Low-Rise Resi | 2 | 2001 | ANSI/ASHRAE/IESNA 90.1 | ||
ANSI | For Safety Glazing Materials for Glazing Motor Veh | 1983 | ANSI Z26.1 |