The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 671.51 A511 No. A5.2/A5.2M-2007 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.005-90 | ||
AWS | Process Specification for Electron Beam Welding | 1 | 671.52 A511 No. C7.3-99 | |||
AWS | Specification for Tungsten and Tungsten-Aloy Elect | 1 | 1998 | 671.52 A511 No. A5.12/A5.12M-98 | ||
AWS | Recommended Safe Practices for the Preparation for | 1 | 671.52 A511 No. F4.1-99 | |||
ANSI/SAE/AS | Quality Systems – Aerospace – Model for Quality As | ANSI/SAE/AS 9100A | ||||
ANSI/ISO | Guidelines for Environmental Auditing – Audit Proc | 2 | ANSI/ISO 14011 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1989 Gas Transmission | 1990 | ANSI/ASME B31.8b | |||
ANSI/ASME | Below the Hook Lifting Devices | 1993 | ANSI/ASME B30.20 | |||
ISO | Plastics – Determination of Water Content | 2008 | ANSI/ISO 15512:2008 (E) | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | ANSI/ASME A17.1b | ||||
ANSI | For Library and Information Services and Related P | ANSI Z39.46 | ||||
AWS | Recommended Practices for Resistance Welding Coate | 1 | 1970 | 671.51 A511 No. C1.3-70 | ||
AWS | Laboratory Method for Measuring Fume Generation Ra | 1 | 1979 | 671.52 A511 No. F1.2-79 | ||
ANSI | Wire and Rope for Mines | ANSI M11.1 | ||||
ANSI | For Ladders - Portable Wood - Safety Requirements | ANSI A14.1 | ||||
ANSI/ISO/TR | Guidelines for Managing the Economics of Quality | 1998 | ANSI/ISO/TR 10014 | |||
ANSI/AWWA | Protective Interior Coatings for Valves and Hydran | 1 | 2005 | ANSI/AWWA C550 – 2005 | ||
ANSI/IPC | Acceptability of Electronic Assemblies | ANSI/IPC A-610D | ||||
ANSI/ASME | Addenda to ANSI/ASME SPPE-1-1998 Quality Assurance | 1 | SPPE-1a-1b-1c-1d | |||
ANSI | For Emergency Eyewash and Shower Equipment | 2004 | ANSI Z358.1 | |||
ANSI | Method for the Measurement of Real Ear Protection | 1974 | ANSI S3.19 | |||
ANSI/ASHRAE | Method of Testing the Performance of Cool Storage | ANSI/ASHRAE 150-2000 | ||||
ANSI/SAE/AS | Fitting, Port Plug and Bleeder | ANSI/SAE/AS 5169 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | ANSI/ASME B31.1a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | ANSI/ASME B30.2a | ||||
ANSI/ASME | Side Boom Tractors | 2004 | ANSI/ASME B30.14 | |||
ANSI/ASME | Backwater Valves | 2003 | ANSI/ASME A112.14.1 | |||
ANSI/ISO | Quality Management – Guidelines for Configuration | ANSI/ISO 10007 | ||||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | ANSI/AWWA C605 | ||||
AWS | Standard Methods for Mechanical Testing of Welds | 1 | 671.52 A511 No. B4.0M-2000 | |||
AWS | Recommended Practices for Gas Tungsten Arc Welding | 1 | 671.51 A511 No. D10.6/D10.6-2000 | |||
API | Calculation Workbook for Oil and Gas Production Eq | 1 | 1996 | 665.5028 A51 No. 4638 | ||
AWS | Specification for Low Alloy Steel Electrodes and F | 1 | 671.52 A511 No. A5.23-90 | |||
AWS | Specification for Consumable Inserts | 1 | 1979 | 671.52 A511 No. A5.30-79 | ||
AWS | Specification for Underwater Welding | 1 | 671.52 A511 No. D3.6-93 | |||
AWS | Filler Metal Comparison Charts | 1 | 671.52 A511 No. FMC-89 | |||
ANSI/UL | Energy Management Equipment | ANSI/UL 916 | ||||
ANSI/NACE | Discontinuity (Holiday) Testing of New Protective | ANSI/NACE RP0188 | ||||
ANSI/ASME | Gage Blocks | 2002 | ANSI/ASME B89.1.9 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1987 Chemical Plant a | 1989 | ANSI/ASME B31.3c | |||
ANSI | For Ladders - Portable Wood - Safety Requirements | 1982 | ANSI A14.1 | |||
ANSI/ASME | Cast Bronze Threaded Fittings(R1994) | ANSI/ASME B16.15 | ||||
ANSI/AAMA | Voluntary Specifications for Aluminum Prime Window | ANSI/AAMA 302.9 | ||||
AWS | Structural Welding Code Sheet Steel | 1 | 1989 | 671.51 A511 No. D1.3-89 | ||
AWS | Specification for Underwater Welding | 1 | 1983 | 671.52 A511 No. D3.6-89 | ||
ANSI | Digital Representation for Communication of Produc | ANSI Y14.26M | ||||
ANSI | Forged Steel Fittings, Socket-Welding and Threaded | ANSI B16.11 | ||||
AWS | Specification for Welding of Rotating Elements of | 1 | 1981 | 671.52 A511 No. D14.6-81 | ||
ANSI/ISO | Quality Assurance Requirements for Measuring Equip | 1992 | ANSI/ISO 10012-1 |