The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/AAMA | Voluntary Specifications for Aluminum Combination | 1980 | ANSI/AAMA 1002.10 | |||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.52 A511 No. A4.2-91 | |||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and G | ANSI/ASME B30.2d | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 B2.1-1-202-96 | ||
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 2007 | 671.51 A511 No. A5.2/A5.2M-2007 | ||
ANSI/ASQC | Quality Systems – Model for Quality Assurance in D | 1987 | ANSI/ASQC Q91 | |||
ANSI/ASME | Refrigeration Piping | 1987 | ANSI/ASME B31.5 | |||
ANSI/AWWA | AWWA Standard for Inspecting and Repairing Steel W | ANSI/AWWA D101 | ||||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 | ||||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | ANSI Z4.3 | ||||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Bulkhead on Sid | ANSI/SAE/AS 1039E | ||||
AWS | Specification for Induction Brazing | 1 | 671.52 A511 No. C3.5-90 | |||
AWS | Specification for the Qualification of Robotic Arc | 1 | 671.52 A511 No. D16.4-99 | |||
ANSI | For Safe Use of Lasers in Health Care Facilities | 2005 | ANSI Z136.3 | |||
ANSI | Protective Coatings (Paints) for the Nuclear Indus | 1974 | ANSI N512 | |||
ANSI/ISO | Non-Destructive Testing of Welds-Radiographic Test | 2003 | ANSI/ISO 17636 | |||
ANSI/IEEE | IEEE Recommended Practice for Maintenance, Testing | 1987 | ANSI/IEEE 450 | |||
ANSI | Test Procedure and Acceptance Criteria for Physica | 1980 | ANSI A151.1 | |||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 1978 | 671.52 A511 No. C4.2-78 | ||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
ANSI/ISO/DIS | Environmental Management – Vocabulary | ANSI/ISO/DIS 14050 | ||||
AWS | Specification for the Qualification of Welding Fab | 1 | 671.52 A511 No. B5.17-2000 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10/D10.10M-99 | |||
ANSI/ASME | Monorails and Underhung Cranes | 1998 | ANSI/ASME B30.11 | |||
ANSI/ASHRAE | Method of Testing the Performance of Cool Storage | 2000 | ANSI/ASHRAE 150-2000 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | 1998 | ANSI/ASME A17.1b | |||
ANSI | Procedures for the Use of the Communication Contro | ANSI X3.28 | ||||
ANSI | Tree, Shrub and Other Woody Plant Maintenance - St | ANSI A300 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | ANSI/ASME B31.5c | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1987 Overhead Hoists | ANSI/ASME B30.16a | ||||
AWS | Specification for Nickel and Nickel-Alloy Bare Wel | 2 | 1997 | 671.52 A511 No. A5.14/A5.14M-97 | ||
AWS | Specification for Welding Procedure and Performanc | 1 | 2000 | 671.52 A511 No. B2.1-2000 | ||
ANSI/ASME | Addenda to ANSI/ASME B56.1 – 1993 Safety Standard | 1995 | ANSI/ASME B56.1a | |||
ANSI/ASME | Safety Standard for Low Lift and High Lift Trucks | 1993 | ANSI/ASME B56.1 | |||
ANSI/ASME | Power Piping | 1995 | ANSI/ASME B31.1 | |||
ISO | Petroleum and Natural Gas Industries – Packaged R | ANSI/ISO 13631:2002 (E) | ||||
ANSI/IEEE | Liquid – Immersed Distribution, Power, and Regulat | ANSI/IEEE C57.12.90 | ||||
ANSI/ASME | Gages and Gaging for Metric M Screw Threads (R2001 | ANSI/ASME B1.16M | ||||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA – 1 | ||||
ANSI | For The Safe Use of Lasers | ANSI Z136.1 | ||||
CAN/CSA | Supplement 2004 to the North American Specificatio | 2004 | CAN/CSA S1365 | |||
ANSI/NSF | Plastics Piping Components and Related Materials | 1990 | ANSI/NSF 14 | |||
AWS | Guide for the Fusion Welding of Titanium and Titan | 1 | 671.52 A511 No. G2.4/G2.4M-2007 | |||
ANSI/ASME | Steel Stacks | 1 | ANSI/ASME STS – 1 – 2006 | |||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | 1987 | ANSI Z4.3 | |||
ANSI | Machine Screws and Machine Screw Nuts | 1972 | ANSI B18.6.3 |