The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/SAE/AMS | Core, Flexible Honeycomb, Polyamide Paper Base, Ph | ANSI/SAE/AMS 3713D | ||||
ANSI | Practice for Occupational and Educational Eye and | 1989 | ANSI Z87.1 | |||
ANSI/ASME | Buttwelding Ends | 1 | 2012 | ANSI/ASME B16.25 | ||
ANSI | Safety Levels with Respect to Human Exposure to Ra | 1982 | ANSI C95.1 | |||
AWS | Specification for Filler Metals for Brazing | 1 | 671.52 A511 No. B5.8-89 | |||
AWS | Recommended Practices for the Brazing of Copper Pi | 1 | 671.51 A511 No. D10.13-95 | |||
AWS | Sheet Metal Welding Code | 1 | 671.52 A511 No. D9.1M/D9.1-2006 | |||
ANSI/ASHRAE/ACCA | Peak Cooling and Heating Load Calculations in Buil | 1 | ANSI/ASHRAE/ACCA 183 – 2007 | |||
ANSI/ISO | Guidelines for Environmental Auditing – Audit Proc | 2 | 1996 | ANSI/ISO 14011 | ||
ANSI/EIA | General Aspects of Group 4 Facsimile Equipment | 1988 | ANSI/EIA 536 | |||
CAN/CSA | Supplement 2004 to the North American Specificatio | CAN/CSA S1365 | ||||
ANSI/NSF | Plastics Piping Components and Related Materials | ANSI/NSF 14 | ||||
ANSI/ASME | Pipeline Transportation Systems for Liquid Hydroca | 1 | ANSI/ASME B31.4-2009 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.6 – 1987 Safety Standard | 1991 | ANSI/ASME B56.6c | |||
ISO | Carbon Steel, Sheet, Strip and Plate | ANSI/SAE/AMS 2046B | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1998 Power Piping | 1999 | ANSI/ASME B31.1a | |||
AWS | Specification for Carbon Steel Electrodes and Flux | 1 | 1989 | 671.52 A511 No. A5.17-89 | ||
AWS | Specification for the Qualification of Welding Eng | 1 | 2001 | 671.52 A511 No. B5.16-2001 | ||
ANSI/ASME | Mobile and Locomotive Cranes | 2000 | ANSI/ASME B30.5 | |||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | 1994 | ANSI/ASHRAE 15 | |||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.5 – 1994 Mobile and Locom | ANSI/ASME B30.5b | ||||
ANSI | Safety Requirements for the Storage and Handling o | ANSI K61.1 | ||||
ANSI/ASHRAE | Energy- Efficient Design of Low-Rise Residential B | ANSI/ASHRAE 90.2 | ||||
ANSI | Scheme for the Identification of Piping Systems | ANSI A13.1 | ||||
ANSI | Gas Water Heaters - Volume III | ANSI Z21.10.3 | ||||
AWS | Recommended Practices and Procedures for Welding L | 1 | 1989 | 671.51 A511 No. D10.12-89 | ||
AWS | Specification for Automotive and Light Truck Compo | 1 | 2000 | 671.52 A511 No. D8.14M/D8.14-2000 | ||
ISO | Mechanical Vibration – Measurement and Evaluation | 2001 | ANSI/ISO 5349-1-2001 | |||
ANSI/ISO | Non-Destructive Testing-Radiographic Examination o | ANSI/ISO 5579 | ||||
ANSI/ASQC | Quality Management and Quality System Elements – G | ANSI/ASQC Q94 | ||||
ANSI/ASHRAE | Energy-Efficient Design of Low Rise Residential Bu | 1 | 2007 | ANSI/ASHRAE 90.2 – 2007 | ||
ANSI/ASHRAE | Safety Standard for Refrigeration Systems | 1 | 2010 | ANSI/ASHRAE 15-2010 | ||
ANSI | Drawing Sheet Size and Format | 1980 | ANSI Y14.1 | |||
ANSI | For Machine Tools - Lathes - Safety Requirements f | 1984 | ANSI B11.6 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-21-96 | |||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 671.51 A511 No. 5.7-77 | |||
AWS | Recommended Practices for Air Carbon Arc Gouging a | 1 | 671.52 A511 No. C5.3-91 | |||
AWS | Specification for Use and Performance of Transpare | 1 | 671.52 A511 No. F2.3M-2001 | |||
ANSI/NACE | Fabrication Details, Surface Finish Requirements a | 2003 | ANSI/NACE RP0178 | |||
ANSI/ISO | Microcopying – ISO Test Chart No. 2-Description an | 1979 | ANSI/ISO 3334 | |||
ANSI/SAE/AS | Fitting, Elbow, 45 Standard and Reducer Bulkhead, | ANSI/SAE/AS 1040E | ||||
ANSI/ISO/DIS | Environmental Labels and Declarations – General Pr | ANSI/ISO/DIS 14020 | ||||
ANSI/ASQC | Quality Management and Quality Assurance Standards | 1994 | ANSI/ASQC Q9000-1 | |||
ISO | Fitting, Elbow, 90 Standard and Reducer Flared | ANSI/SAE/AS 1034E | ||||
ANSI/ASME | Refrigeration Piping | 1992 | ANSI/ASME B31.5 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-206-96 | ||
AWS | Specification for Covered Corrosion-Resisting Chro | 1 | 1981 | 671.51 A511 No. A5.4-81 | ||
ANSI/ASME | Overhead Hoists (Underhung) | 2003 | ANSI/ASME B30.16 | |||
ANSI/ASME | Gaging for Dryseal Pipe Threads (inch) (R2004) | 1991 | ANSI/ASME B1.20.5 |