The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/SAE/AS | Fitting, Adapter, Straight Pipe to Flared | ANSI/SAE/AS 5194B | ||||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/SAE/AS | Fitting, Union, Tube, .375 Bulkhead | ANSI/SAE/AS 5406C | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1989 Gas Transmission | ANSI/ASME B31.8c | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | ANSI/ASME B30.20a | ||||
AWS | Structural Welding Code Aluminum | 1 | 1997 | 671.52 A511 No. D1.2-97 | ||
ANSI/ASME | Valves-Flanged Threaded and Welding End | 2009 | ANSI/ASME B16.34-2009 | |||
AWS | Specification for Low-Alloy Steel Electrodes and F | 1 | 671.52 A511 No. A5.23/A5.23M-97 | |||
ANSI/ASME | Slings | 2003 | ANSI/ASME B30.9 | |||
ANSI/ASME | Safety Code for Elevators and Escalators | 1993 | ANSI/ASME A17.1 | |||
AWS | Recommended Practices for Gas Tungsten Arc Welding | 1 | 2000 | 671.51 A511 No. D10.6/D10.6-2000 | ||
AWS | Specification for Welded Joints in Machinery and E | 1 | 1997 | 671.52 A511 No. D14.4-97 | ||
AWS | Specification for Tungsten and Tungsten Alloy Elec | 1 | 671.52 A511 No. A5.12-92 | |||
AWS | Recommended Practices for Fused Thermal Sprayed De | 1 | 671.51 A511 No. C2.15-75 | |||
ANSI/SAE/AS | Fitting End, Bulkhead Flareless, Design Standard | ANSI/SAE/AS 4377C | ||||
ANSI/ISO/ASQC | Quality Management – Guidelines for Configuration | ANSI/ISO/ASQC Q10007 | ||||
AWS | Standard for Automotive Resistance Spot Welding El | 1 | 671.52 A511 No. D8.6-77 | |||
ANSI/NISO | Information Retrieval Application Service Definiti | 1 | ANSI/NISO Z39.50 – 2003 | |||
AWS | Specification for Low Alloy Steel Electrodes and F | 1 | 1990 | 671.52 A511 No. A5.23-90 | ||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 1988 | 671.52 A511 No. A5.10-88 | ||
ANSI | Gas Water Heaters - Volume III | 1987 | ANSI Z21.10.3 | |||
ANSI | Overhead and Gantry Cranes | 1976 | ANSI B30.2.0 | |||
ANSI/ASME | Stainless Steel Pipe (R1994) | 1985 | ANSI/ASME B36.19M | |||
ANSI/ASME | Power Piping | 1992 | ANSI/ASME B31.1 | |||
ANSI/ASME | Elevator and Escalator Electrical Equipment | 2004 | A17.5 – 2004 | |||
ANSI/ISO | Quality Systems – Guidelines for Performance Impro | 2000 | ANSI/ISO 9004 | |||
ANSI | Industrial Security for Nuclear Power Plants | ANSI N18.17 | ||||
ANSI/AWWA | Coal-Tar Protective Coatings and Linings for Steel | 2002 | ANSI/AWWA C203 | |||
ANSI | Building Code Requirements for Masonry | ANSI A41.1 | ||||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 | ||||
ANSI | Gas-Fired Construction Heaters | ANSI Z83.7 | ||||
ANSI/IEEE | Supplement to Graphic Symbols for Electrical and E | ANSI/IEEE 315A | ||||
ANSI/ASME | Hook-Type Forks and Fork Carriers for Powered Indu | ANSI/ASME B56.11.4 | ||||
ANSI/UL | Access Control System Units | 1999 | ANSI/UL 294 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | ANSI/ASME B31.3a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.9 – 1996 Slings | ANSI/ASME B30.9a | ||||
ANSI/MSS | Specification for High-Test, Wrought, Butt-Welding | 1 | 2008 | ANSI/MSS SP-75-2008 | ||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 1 | 2010 | ANSI/ASCE 7 | ||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | 1998 | ANSI/ASME B16.5a | |||
AWS | Recommended Practices for Electrogas Welding | 1 | 2000 | 671.52 A511 No. C5.7-2000 (R2006) | ||
AWS | Standard for Accreditation of Test Facilities for | 1 | 1989 | 671.52 A511 No. QC4-89 | ||
ISO | Specification for Low Alloy Steel Filler Metals fo | 1 | 671.52 A511 No. A5.28-79 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1/D1.1M-2004 | |||
ANSI/UL | Steel Underground Tanks for Flammable and Combusti | ANSI/UL 58 | ||||
ANSI/NSF | Plastics Piping Components and Related Materials | ANSI/NSF 14 | ||||
AWS | Specification for Aluminum Brazing | 1 | 671.52 A511 No. C3.7-99 | |||
AWS | Guide to Weld Discoloration Levels on Inside of Au | 1 | 671.52 A511 No. D18.2-99 | |||
ISO | Specification for Carbon and Low Alloy Steel Elect | 1 | 1991 | 671.52 A511 No. A5.25-91 | ||
ANSI | For Refuse Collection, Processing and Disposal Equ | 1992 | ANSI Z245.1 | |||
ANSI | Survey Methods for Determination of Sound Power Le | 1979 | ANSI S1.36 |