The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ISO | Hydraulic Fluid Power – Fluid Contamination-Determ | 1991 | ANSI/ISO 4405 | |||
AWS | Specification for Resistance Welding of Carbon and | 1 | 1999 | 671.51 A511 No. C1.4M/C1.4-99 | ||
AWS | Laboratory Method for Measuring Fume Generation Ra | 1 | 1992 | 671.52 A511 No. F1.2-92 | ||
ANSI/SAE/AS | Fitting, Tee, Standard and Reducer, Bulkhead on R | ANSI/SAE/AS 1032E | ||||
ANSI/BHMA | Power Assist and Low Energy Power Operated Doors | ANSI/BHMA A156.19 | ||||
ANSI | Additional controls for Use with ANS Code for Info | 1979 | ANSI X3.64 | |||
ANSI/ASME | Surface Texture (Surface Roughness, Waviness, and | ANSI/ASME B46.1 | ||||
ANSI | Buttress Inch Screw Thread 7/45 Form (R2003) | 1973 | ANSI B1.9 | |||
ANSI/SAE/AMS | Pyrometry | ANSI/SAE/AMS 2750D | ||||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
ANSI | Reference Designations for Electrical and Electron | ANSI Y32.16 | ||||
ANSI/ASQC | Specification of General Requirements for a Qualit | 1985 | ANSI/ASQC C1 | |||
ANSI/ASME | Pipeline Transportation Systems for Liquid Hydroca | 1998 | ANSI/ASME B31.4 | |||
ANSI/ASME | Overhead Hoists (Underhung) | 1987 | ANSI/ASME B30.16 | |||
ANSI/ASME | Unified Inch Screw Threads (R2001) | 1989 | ANSI/ASME B1.1 | |||
AWS | Specification for Zirconium and Zirconium Alloy Ba | 1 | 1979 | 671.52 A511 No. A5.24-79 | ||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 1984 | 671.51 A511 No. A5.7-84 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.11 – 1989 Slurry Transpor | ANSI/ASME B31.11a | ||||
AWS | Specification for Torch Brazing | 1 | 671.52 A511 No. C3.4-90 | |||
ANSI/ASME | Addenda to ASME B31.1 – Power Piping | ANSI/ASME B31.1b | ||||
AWS | Guide for Components of Robotic and automatic Arc | 1 | 671.52 A511 No. D16.2/D16.2-2007 | |||
ANSI | Wing Nuts, Thumb Screws, and Wing Screws (R1983) | ANSI B18.17 | ||||
ANSI/IEEE | IEEE Recommended Practice for Grounding of Industr | ANSI/IEEE 142 – 2007 | ||||
ANSI/ASME | Manual for Determining the Remaining Strength of C | 1 | 2012 | ANSI/ASME B31G | ||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.013-91 | |||
ANSI/TIA | Commercial Building Standard for Telecommunication | ANSI/TIA 569-B | ||||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.51 A511 No. A4.2M/A4.2-97 | |||
ANSI/ISO/TR | Guidelines for Managing the Economics of Quality | ANSI/ISO/TR 10014 | ||||
ANSI/ISO | Environmental Management – Environmental Assessmen | 2001 | ANSI/ISO 14015 | |||
CEI/IEC | Rotating Electrical Machines – Part 1: Rating and | CEI/IEC 60034-1:2004 | ||||
AWS | Recommended Practices for Resistance Welding Coate | 1 | 671.51 A511 No. C1.3-70 | |||
ANSI/EPTC | Guide for Gas Transmission and Distribution Piping | 2003 | ANSI/EPTC Z380.1 | |||
AWS | Structural Welding Code Sheet Steel | 1 | 1981 | 671.51 A511 No. D1.3-81 | ||
AWS | Specification for Underwater Welding | 1 | 1989 | 671.52 A511 No. D3.6-89 | ||
ANSI/ASME | Process Piping | 1 | ANSI/ASME B31.3-2010 | |||
ANSI/SAE/AMS | Heat Treatment of Wrought Aluminum Alloy Parts | ANSI/SAE/AMS 2770G | ||||
ANSI/ISA | Instrumentation Symbols and Identification (R1992) | ANSI/ISA S5.1 | ||||
ANSI | Information Retrieval Service Definition and Proto | 1988 | ANSI Z39.50 | |||
ANSI/ASME | Revision of Engineering Drawings and Assorted Docu | ANSI/ASME Y14.35M | ||||
ANSI | Specifications for Dry Cells and Batteries | 1979 | ANSI C18.1 | |||
ANSI | Safety Requirements for Material Hoists | 1981 | ANSI A10.5 | |||
ANSI/ASME | Acme Screw Threads (R2004) | ANSI/ASME B1.5 | ||||
ANSI | For Plastic Water Closet Bowls and Tanks | ANSI Z124.4 | ||||
ANSI/ASME | Surface Texture (Surface Roughness, Waviness, and | 1995 | ANSI/ASME B46.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1992 Power Piping | 1993 | ANSI/ASME B31.1b | |||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | 1992 | ANSI/ASME B30.2b | |||
ANSI/ASC | Alloy and Temperature Designation Systems for Alum | 1990 | ANSI/ASC H35.1 | |||
ISO | Specification for Bare Electrodes and Rods for Sur | 1 | 2001 | 671.52 A511 No. A5.21-2001 | ||
AWS | Specification for Corrosion Resisting Chromium and | 1 | 1981 | 671.52 A511 No. A5.9-81 | ||
ANSI/ASME | Liquid Transportation Systems for Hydrocarbons, Li | ANSI/ASME B31.4 |