The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
ANSI | Electrical Power Systems and Equipment – Voltage R | ANSI C84.1 | ||||
ANSI/SAE/AS | Adhesive, Film Form, Metallic Structural Sandwich | ANSI/SAE/AS A – 25463 | ||||
ANSI/IEEE | IEEE Standard Letter Symbols for Units of Measurem | ANSI/IEEE 260 | ||||
ANSI | Requirements for Safety-Belts, Harnesses, Lanyards | ANSI A10.14 | ||||
ANSI/ISO | Quality Management—Guidelines for Training | ANSI/ISO 10015 | ||||
ANSI/ASME | Addenda to ANSI/ASME B56.8 – 1993 Safety Standard | ANSI/ASME B56.8a | ||||
ANSI | Acceptance Testing Specifications for Electrical P | ATS-2007 | ||||
AWS | Specification for Carbon Steel Electrodes and Rods | 1 | 2001 | 671.52 A511 No. A5.18/A5.18M-2001 | ||
AWS | Specification for the Qualification of Welding Ins | 1 | 2001 | 671.52 A511 No. B5.2-2001 | ||
ANSI/ASME | Building Services Piping | 1996 | ANSI/ASME B31.9 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 1999 | 671.51 A511 No. D10.10/D10.10M-99 | ||
ANSI/ASME | Power Piping | 1989 | ANSI/ASME B31.1 | |||
AWS | Sheet Metal Welding Code | 1 | 2006 | 671.52 A511 No. D9.1M/D9.1-2006 | ||
ANSI/ASME | Large Diameter Steel Flanges | 1990 | ANSI/ASME B16.47 | |||
ANSI/AMS | Rods, Sheets, and Molded Shapes, Polychlorotrifluo | ANSI/AMS 3650 Rev C | ||||
ANSI/ISO | Quality Management and Quality Assurance Standards | 1997 | ANSI/ISO 9000-3 | |||
ANSI/ASQC | Generic Guidelines for Quality Systems | 1979 | ANSI/ASQC Z1.15 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-208-96 | |||
AWS | Specification for Low Alloy Steel Covered Arc Weld | 1 | 671.51 A511 No. A5.5-81 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | 2005 | ANSI/ASME B30.2 – 2005 | ||
ANSI/ASME | Pressure Relief Devices | 1 | 2008 | ANSI/ASME PTC 25-2008 | ||
ANSI/ASME | Safety Standard for Conveyors and Related Equipmen | ANSI/ASME B20.1 | ||||
ANSI/AMS | Steel, Corrosion Resistant, Seamless or Welded Tub | ANSI/AMS 5563B | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | ANSI/ASME B31.8c | ||||
ANSI/ASME | Manually Lever Operated Hoists | ANSI/ASME B30.21 | ||||
API | Recommended Practice for Gas Lift System Design an | 658.5028 A51 no.11V8 | ||||
ISO | Fitting, Tee, Standard and Reducer, Bulkhead on Ru | ANSI/SAE/AS 1031E | ||||
ANSI | Guideline for Bar Code Print Quality | 1990 | ANSI X3.182 | |||
ANSI | Dryseal Pipe Threads (Inch) (R2003) | 1976 | ANSI B1.20.3 | |||
AWS | Uniform Designation System of Oxyfuel Nozzles | 1 | 671.52 A511 No. C4.5M-2000 | |||
AWS | Guide for the Joining of Wrought Nickel-Based Allo | 1 | 671.52 A511 No. G2.1M/G2.1-2002 | |||
AWS | Standard Procedures for Determination of Moisture | 1 | 671.52 A511 No. A4.4M-2001 | |||
ANSI | For Office Machines and Supplies – Alphanumeric Ma | ANSI X4.22 | ||||
ANSI/TIA/EIA | Structural Standards for Steel Antenna Towers & An | ANSI/TIA/EIA 222-F | ||||
ANSI/ISO | General Purpose Flat Pallets for Through Transit o | ANSI/ISO 6780 | ||||
ANSI | For Machine Tools - Power Press Brakes - Safety | ANSI B11.3 | ||||
ANSI/ISO/TS | Quality Systems – Automotive Suppliers – Particula | ANSI/ISO/TS 16949 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Pro | ANSI/ASQC Q9002 | ||||
ANSI | Tree, Shrub and Other Woody Plant Maintenance - St | 1995 | ANSI A300 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-21-96 | ||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 1977 | 671.51 A511 No. 5.7-77 | ||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | 2002 | ANSI/ASME NQA---1a | |||
ANSI/ASME | Liquid Petroleum Transportation Piping Systems | 1979 | ANSI/ASME B31.4 | |||
AWS | Recommended Practices for Air Carbon Arc Gouging a | 1 | 1991 | 671.52 A511 No. C5.3-91 | ||
AWS | Specification for Use and Performance of Transpare | 1 | 2001 | 671.52 A511 No. F2.3M-2001 | ||
ANSI/ASME | Side Boom Tractors | 1991 | ANSI/ASME B30.14 | |||
ANSI/ASME | Interpretations—ANSI/ASME A17.3 – No. 1, 4 | ANSI/ASME A 17.3 | ||||
ANSI/ISO | Environmental Management - Vocabulary | 1998 | ANSI/ISO 14050 | |||
ANSI/IEEE | IEEE Guide for the Design and Installation of Cabl | 1986 | ANSI/IEEE 422 |