The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1995 | ANSI/ASME B31.3c | |||
ANSI/UL | Access Control System Units | ANSI/UL 294 | ||||
ANSI/NACE | Sulfide Stress Cracking Resistant Metallic Materia | ANSI/NACE MR0175 | ||||
ANSI/SAE | Assembly, Installation and Torque for Flareless an | 1 | 2005 | ANSI/SAE AS 5148 –1998(R2005) | ||
ANSI/ASME | Process Piping | 1 | 2012 | ANSI/ASME B31.3 | ||
ANSI | Ductile Iron Pipe, Centrifugally Cast, for Gas | 1991 | ANSI A21.52 | |||
AWS | Specification for Welded Joints in Machinery and E | 1 | 671.52 A511 No. D14.4-97 | |||
AWS | Effects of Welding on Health VII | 1 | 671.52 A511 No. EWH7-89 | |||
ANSI | Safety Color Code for Marking Physical Hazards | 1979 | ANSI Z53.1 | |||
AWS | Bridge Welding Code | 1 | 1988 | 671.51 A511 No. D1.5-88 | ||
ANSI | Requirements for Salient-Pole Synchronous Generato | 1982 | ANSI C50.12 | |||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 2002 | 671.52 A511 No. C2.20/C2.20M-2002 | ||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 671.52 A511 No. A5.10-88 | |||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 671.51 A511 No. D10.8-78 | |||
ANSI | Control Valve Seat Leakage | ANSI B16.104 | ||||
ANSI/ASME | Pipe Threads, General Purpose (inch) (R1992, 2001) | 3 | ANSI/ASME | |||
ANSI | For the Safe Use of Lasers in Health Care Faciliti | ANSI Z136.3 | ||||
ANSI/IESNA | Lighting for Exterior Environments | ANSI/IESNA RP-33-99 | ||||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA---1a | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1989 Liquid Transport | ANSI/ASME B31.4a | ||||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
ANSI/ISO | Quality Management Systems – Requirements | 2000 | ANSI/ISO 9001 | |||
ANSI/ASME | Large Diameter Steel Flanges NPS 26 Through 60 | 4 | 1996 | ANSI/ASME B16.47 | ||
ANSI/AWWA | Ductile Iron and Gray-Iron Fittings, 3 in. Through | 1982 | ANSI/AWWA C110/A21.10 | |||
ANSI/AMS | Sand Magnesium Alloy Castings | ANSI/AMS 4420M | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.002-90 | ||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 1983 | 671.52 A511 No. A5.11-83 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
ANSI/ASME | Below the Hook Lifting Devices | 1999 | ANSI/ASME B30.20 | |||
ANSI/SAE/AS | Fitting, Union, Tube, .375 Bulkhead | ANSI/SAE/AS 5406C | ||||
ANSI/ISO | Environmental Labels and Declarations – General Pr | ANSI/ISO 14020 | ||||
AWS | Specification for Welding Earthmoving and Construc | 1 | 2000 | 671.52 A511 No. D14.3/D14.3M-2000 | ||
ANSI/ASHRAE | Designation and Safety Classification of Refrigera | 1 | 2010 | ANSI/ASHRAE 34a-o-2010 | ||
ANSI/ASSE | Performance Requirements for Temperature Actuated | 2003 | ANSI/ASSE 1017 – 2003 | |||
AWS | Recommended Practices for Electrogas Welding | 1 | 671.52 A511 No. C5.7-2000 (R2006) | |||
AWS | Standard for Accreditation of Test Facilities for | 1 | 671.52 A511 No. QC4-89 | |||
ANSI | Specifications for Credit Cards | 1971 | ANSI X4.13 | |||
AWS | Recommended Practices for Metallizing with Aluminu | 1 | 1967 | 671.51 A511 No. C2.2-67 | ||
ANSI | Preferred Limits and Fits for Cylindrical Ports (R | 1967 | ANSI B4.1 | |||
AWS | Sampling Strategy Guide for Evaluating Contaminant | 1 | 1991 | 671.52 A511 No. F1.3-91 | ||
ISO | Specification for Carbon and Low Alloy Steel Elect | 1 | 671.52 A511 No. A5.25-91 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1-84 | |||
ANSI | Data Application Identifier Standard | ANSI MH10.8.2 | ||||
ANSI | Ductile Iron Fittings 3 in. through 24 in. for Gas | ANSI A21.14 | ||||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 | ||||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | ANSI Z4.3 | ||||
ANSI/AWWA | AWWA Standard for Inspecting and Repairing Steel W | ANSI/AWWA D101 |