The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 2007 | 671.51 A511 No. A5.2/A5.2M-2007 | ||
ANSI | Data Application Identifier Standard | ANSI MH10.8.2 | ||||
ANSI | Ductile Iron Fittings 3 in. through 24 in. for Gas | ANSI A21.14 | ||||
ANSI | Engineering Method for the Determination of Sound | 1992 | ANSI S12.12 | |||
AWS | Specification for Induction Brazing | 1 | 671.52 A511 No. C3.5-90 | |||
AWS | Specification for the Qualification of Robotic Arc | 1 | 671.52 A511 No. D16.4-99 | |||
ANSI/ASHRAE | Energy Standard for Buildings Except Low-Rise Resi | 1 | 2007 | ANSI/ASHRAE 90.1 – 2007 | ||
ANSI/ISO/IEC | General Requirements for the Competence of Testing | 1999 | ANSI/ISO/IEC 17025 | |||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 | ||||
ANSI/ASME | Standard for the Qualification of Elevator Inspect | 1 | 2007 | ANSI/ASME QEI-1-2007 | ||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | 1991 | ANSI/IEEE 1154 | |||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | ANSI Z4.3 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 - 1987 Overhead Hoists | 1990 | ANSI/ASME B30.16b | |||
ANSI/ASME | Acme Screw Threads (R2004) | 1997 | ANSI/ASME B1.5 | |||
ANSI/ASME | Valves-Flanged Threaded and Welding End | ANSI/ASME B16.34-2009 | ||||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI/ASME | Steam Generating Units – Performance Test Code (R1 | 1964 | ANSI/ASME PTC4.1 | |||
ANSI/ASME | Liquid Transportation Systems for Hydrocarbons, Li | 1986 | ANSI/ASME B31.4 | |||
ANSI/UL | Panelboards | ANSI/UL 67 | ||||
ANSI/NSF | Drinking Water System Components Health Effects | ANSI/NSF 61 | ||||
ANSI | Test Procedure and Acceptance Criteria for Physica | 1980 | ANSI A151.1 | |||
ANSI/ISO | Quality Systems – Guidelines for Performance Impro | ANSI/ISO 9004 | ||||
ANSI/AWWA | Coal-Tar Protective Coatings and Linings for Steel | ANSI/AWWA C203 | ||||
AWS | Specification for the Qualification of Welding Fab | 1 | 671.52 A511 No. B5.17-2000 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10/D10.10M-99 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.003-90 | |||
AWS | Bridge Welding Code | 1 | 1988 | 671.51 A511 No. D1.5-88 | ||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 2002 | 671.52 A511 No. C2.20/C2.20M-2002 | ||
AWS | Specification for Nickel and Nickel-Alloy Bare Wel | 2 | 1997 | 671.52 A511 No. A5.14/A5.14M-97 | ||
AWS | Specification for Welding Procedure and Performanc | 1 | 2000 | 671.52 A511 No. B2.1-2000 | ||
ANSI | Control Valve Seat Leakage | ANSI B16.104 | ||||
ANSI | For Safety Glazing Materials for Glazing Motor Veh | 1983 | ANSI Z26.1 | |||
ANSI | Metric Module, Involute Splines (R1989) | 1980 | ANSI B92.2M | |||
AWS | Specification for Underwater Welding | 1 | 671.52 A511 No. D3.6M-99 | |||
ANSI/ASME | Test Code on Compressors and Exhausters | 1 | ANSI/ASME PTC 10 – 1997(R2009) | |||
AWS | Specification for Welding of Austenitic Stainless | 1 | 1999 | 671.52 A511 No. D18.1-99 | ||
ANSI/ASME | Pipe Threads, General Purpose (inch) (R1992, 2001) | 3 | ANSI/ASME | |||
ANSI/ASME | Side Boom Tractors | 2010 | ANSI/ASME B30.14-2010 | |||
ANSI/ISO | Quality Management – Guidelines for Configuration | 1995 | ANSI/ISO 10007 | |||
ANSI | For the Safe Use of Lasers in Health Care Faciliti | ANSI Z136.3 | ||||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | 1994 | ANSI/AWWA C605 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 2001 | ANSI/ASME B30.2 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | 1998 | ANSI/ASCE 7 | ||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1989 Liquid Transport | ANSI/ASME B31.4a | ||||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
ANSI/ASME | Slurry Transportation Piping Systems | 1989 | ANSI/ASME B31.11 | |||
ANSI/ASME | Addenda to Power Piping | 1989 | ANSI/ASME B31.1a |