The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ISO | Non-Destructive Testing of Welds-Radiographic Test | 2003 | ANSI/ISO 17636 | |||
ANSI/IEEE | IEEE Recommended Practice for Maintenance, Testing | 1987 | ANSI/IEEE 450 | |||
AWS | Specification for Carbon and Low Alloy Steel Elect | 1 | 1991 | 671.52 A511 No. A5.26-91 | ||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and G | ANSI/ASME B30.2d | ||||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 1978 | 671.52 A511 No. C4.2-78 | ||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 | ||||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | ANSI Z4.3 | ||||
AWS | Specification for the Qualification of Welding Fab | 1 | 671.52 A511 No. B5.17-2000 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10/D10.10M-99 | |||
AWS | Specification for Welded Joints in Machinery and E | 1 | 671.52 A511 No. D14.4-97 | |||
AWS | Effects of Welding on Health VII | 1 | 671.52 A511 No. EWH7-89 | |||
ANSI/ASME | Safety Standard for Operator Controlled Industria | 1992 | ANSI/ASME B56.9 | |||
ANSI | Safety Color Code for Marking Physical Hazards | 1979 | ANSI Z53.1 | |||
ANSI/ASME | Interpretations – ASME B31.1 No. 14 Cases No. 9, | ANSI/ASME B31.1 | ||||
ANSI | Requirements for Salient-Pole Synchronous Generato | 1982 | ANSI C50.12 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
CAN/CSA | North American Specification for the Design of Col | CAN/CSA S136-01 | ||||
AWS | Specification for Welding Earthmoving and Construc | 1 | 2000 | 671.52 A511 No. D14.3/D14.3M-2000 | ||
ANSI/KCMA | Recommended Performance and Construction Standards | ANSI/KCMA A161.1 | ||||
ANSI/ISO | Amendment 1—General Purpose Flat Pallets for Throu | ANSI/ISO 6780 | ||||
ANSI/ASHRAE | Designation and Safety Classification of Refrigera | 1 | 2010 | ANSI/ASHRAE 34a-o-2010 | ||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 2001 | ANSI/ASME B30.2 | |||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Fin | ANSI/ASQC Q9003 | ||||
ANSI | Acceptance Testing Specifications for Electrical P | ATS-2007 | ||||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | 1998 | ANSI/ASCE 7 | ||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
ANSI/ISO | Quality Management Systems – Requirements | 2000 | ANSI/ISO 9001 | |||
ANSI/AWWA | Ductile Iron and Gray-Iron Fittings, 3 in. Through | 1982 | ANSI/AWWA C110/A21.10 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.002-90 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | ANSI/ASME B31.5c | ||||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 1983 | 671.52 A511 No. A5.11-83 | ||
ANSI | Procedures for the Use of the Communication Contro | ANSI X3.28 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1987 Overhead Hoists | ANSI/ASME B30.16a | ||||
ANSI | Tree, Shrub and Other Woody Plant Maintenance - St | ANSI A300 | ||||
AWS | Local Heat Treatment of Welds in Piping and Tubing | 1 | 1975 | 671.51 A511 No. D10.10-75 | ||
AWS | Recommended Practices for Automotive Weld Quality | 1 | 1988 | 671.52 A511 No. D8.7-88 | ||
ANSI/ASME | Pipe Threads, General Purpose (inch) (R1992, 2001) | 3 | ANSI/ASME | |||
ANSI | For the Safe Use of Lasers in Health Care Faciliti | ANSI Z136.3 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-207-96 | |||
AWS | Specification for Stainless Steel Electrodes for S | 1 | 671.51 A511 No. A5.4-92 | |||
AWS | Recommended Practices for Electrogas Welding | 1 | 671.52 A511 No. C5.7-2000 (R2006) | |||
AWS | Standard for Accreditation of Test Facilities for | 1 | 671.52 A511 No. QC4-89 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | 1984 | ANSI/ASME B31.8a | |||
ANSI | Specifications for Credit Cards | 1971 | ANSI X4.13 | |||
ANSI | Preferred Limits and Fits for Cylindrical Ports (R | 1967 | ANSI B4.1 | |||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.52 A511 No. A4.2-91 |