The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 2001 | ANSI/ASME B30.2 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | 1998 | ANSI/ASCE 7 | ||
AWS | Guide for Welding Iron Castings | 1 | 1989 | 671.51 A511 No. D11.2-89 | ||
AWS | Railroad Welding Specification - Cars and Locomoti | 1 | 1993 | 671.52 A511 No. D15.1-93 | ||
ANSI/SAE/AS | Fitting, Union, Tube, .375 Bulkhead | ANSI/SAE/AS 5406C | ||||
ANSI | Fundamentals Governing the Design and Operation of | 1979 | ANSI Z9.2 | |||
ANSI/ISO | Environmental Labels and Declarations – General Pr | ANSI/ISO 14020 | ||||
ANSI | Thread Forming and Thread Cutting Tapping Screws a | 1981 | ANSI B18.6.4 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 671.52 A511 No. D8.9-97 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | ANSI/ASME B30.2 – 2005 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.002-90 | ||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 1983 | 671.52 A511 No. A5.11-83 | ||
AWS | Specification for Tungsten and Tungsten-Alloy Elec | 1 | 671.52 A511 No. A5.12/A5.12M-98 | |||
AWS | Recommended Safe Practices for Thermal Spraying | 1 | 671.51 A511 No. C2.1-73 | |||
ANSI/ISO | Radiography of Welds and Viewing Conditions for Fi | ANSI/ISO 2504 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
ANSI/ASQC | Quality Management and Quality Assurance Standards | ANSI/ASQC Q90 | ||||
ANSI/ASME | Below the Hook Lifting Devices | 1999 | ANSI/ASME B30.20 | |||
ANSI/ASME | Pipe Threads, General Purpose (inch) (R1992, 2001) | 3 | ANSI/ASME | |||
ANSI | For the Safe Use of Lasers in Health Care Faciliti | ANSI Z136.3 | ||||
ANSI/ASHRAE | Energy Standard for Buildings Except Low-Rise Resi | 1 | 2007 | ANSI/ASHRAE 90.1 – 2007 | ||
ANSI/ASME | Standard for the Qualification of Elevator Inspect | 1 | 2007 | ANSI/ASME QEI-1-2007 | ||
ANSI/SAE/AMS | Nickel Alloy, Corrosion and Heat-Resistant, Bars, | ANSI/SAE/AMS 5662M | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1989 Liquid Transport | ANSI/ASME B31.4a | ||||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
ANSI/UL | High-Efficiency, Particulate, Air Filter Unit | 1985 | ANSI/UL 586 | |||
ANSI | Survey Methods for Determination of Sound Power Le | ANSI S1.36 | ||||
ANSI | Specifications for Ceramic Tiles | ANSI A137.1 | ||||
ANSI/ISO/IEC | General Requirements for the Competence of Testing | 1999 | ANSI/ISO/IEC 17025 | |||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | 1991 | ANSI/IEEE 1154 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.16 - 1987 Overhead Hoists | 1990 | ANSI/ASME B30.16b | |||
ANSI/ASME | Acme Screw Threads (R2004) | 1997 | ANSI/ASME B1.5 | |||
AWS | Recommended Practices for Stud Welding | 1 | 1993 | 671.52 A511 No. C5.4-93 | ||
AWS | Recommended Safe Practice for Electron Beam Weldin | 1 | 1978 | 671.52 A511 No. F2.1-78 | ||
ANSI/UL | Access Control System Units | ANSI/UL 294 | ||||
ANSI | For Safe Use of Lasers in Health Care Facilities | 2005 | ANSI Z136.3 | |||
ANSI/NACE | Sulfide Stress Cracking Resistant Metallic Materia | ANSI/NACE MR0175 | ||||
ANSI | Protective Coatings (Paints) for the Nuclear Indus | 1974 | ANSI N512 | |||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.52 A511 No. A4.2-91 | |||
AWS | Recommended Practices for Ultrasonic Inspection of | 1 | 671.52 A511 no. C3.8-90 | |||
AWS | Guide for the Evaluation of Hot Gas, Hot Gas Extru | 1 | 671.52 A511 No. G1.10M-2001 | |||
AWS | Specification for Carbon and Low Alloy Steel Elect | 1 | 1991 | 671.52 A511 No. A5.26-91 | ||
AWS | Specification for Consumable Inserts | 1 | 671.52 A511 No. A5.30/A5.30M-2007 | |||
AWS | Bridge Welding Code | 1 | 671.51 A511 No. D1.5-96 | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
ANSI/BOMA | Standard Method for Measuring Floor Area in Office | ANSI/BOMA Z65.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1995 | ANSI/ASME B31.3c | |||
ANSI/ASME | Safety Standard for Low Lift and High Lift Trucks | ANSI/ASME B56.1 | ||||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 |