The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/NACE | Discontinuity (Holiday) Testing of New Protective | ANSI/NACE RP0188 | ||||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | ANSI/ASME B30.20b | ||||
AWS | Specification for Underwater Welding | 1 | 671.52 A511 No. D3.6-93 | |||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 1998 | ANSI/ISO 14041 | |||
AWS | Filler Metal Comparison Charts | 1 | 671.52 A511 No. FMC-89 | |||
AWS | Specification for Low Alloy Steel Electrodes and F | 1 | 671.52 A511 No. A5.23-90 | |||
ANSI/IEEE | American National Standard for Metric Practice | 1992 | ANSI/IEEE 268 | |||
AWS | Structural Welding Code Steel | 1 | 1992 | 671.51 A511 No. D1.1-92 | ||
AWS | Specification for Induction Brazing | 1 | 1999 | 671.52 A511 No. C3.5-99 | ||
ANSI/ASME | Monorails and Underhung Cranes | 1988 | ANSI/ASME B30.11 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1993 Safety Code for | 1994 | ANSI/ASME A17.1a | |||
ANSI | For Library and Information Services and Related P | 1983 | ANSI Z39.46 | |||
ANSI/ASNT | Qualification and Certification of Nondestructive | 1 | 2011 | ANSI/ASNT CP-189 | ||
ANSI | National Electrical Safety Code | 1993 | ANSI C2 | |||
ANSI | Involute Splines and Inspection | ANSI B92.1 | ||||
ANSI/ASME | Elevator and Escalator Electrical Equipment | A17.5 – 2004 | ||||
ANSI | Fuel Gas Piping | ANSI B31.2 | ||||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 – 2008 | ||||
AWS | Specification for Welding of Presses and Press Com | 1 | 1997 | 671.52 A511 No. D14.5-97 | ||
ANSI/SAE | Airspeed Tubes Electrically Heated | 1 | 2008 | ANSI/SAE AS 393B-2008 | ||
ANSI/IEEE | IEEE Standard for Software Test Documentation (R19 | ANSI/IEEE 829 | ||||
ANSI/ASME | Pallet Sizes (R1996) | ANSI/ASME MH1.2.2M | ||||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2005 | ANSI/ASCE 7 | |||
AWS | Filler Metal Procurement Gudelines | 1 | 671.51 A511 No. A5.01-78 | |||
ANSI/UL | Panelboards | 1993 | ANSI/UL 67 | |||
ANSI/ASME | Stainless Steel Pipe (R1994) | 1985 | ANSI/ASME B36.19M | |||
ANSI/NSF | Drinking Water System Components Health Effects | 1997 | ANSI/NSF 61 | |||
ANSI/ASME | Power Piping | 1992 | ANSI/ASME B31.1 | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 | ||||
AWS | Specification for Low Alloy Steel Electrodes and F | 1 | 1990 | 671.52 A511 No. A5.23-90 | ||
ANSI | Gas-Fired Construction Heaters | ANSI Z83.7 | ||||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 1988 | 671.52 A511 No. A5.10-88 | ||
ANSI/SAE/AMS | Pyrometry | ANSI/SAE/AMS 2750D | ||||
ANSI/SAE/AS | Aerospace First Article Inspection Requirement | ANSI/SAE/AS 9102 | ||||
ANSI/ISO | Environmental Management Systems – General Guideli | 2 | ANSI/ISO 14004 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | ANSI/ASME B31.3a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.9 – 1996 Slings | ANSI/ASME B30.9a | ||||
AWS | Recommended Practices for Electron Beam Welding | 1 | 671.52 A511 No. C7.1-92 | |||
AWS | Guide for the Training and Qualification of Weldin | 1 | 671.52 A511 No. EG2.0-95 | |||
ANSI/ISO | Amendment 1—General Purpose Flat Pallets for Throu | 1994 | ANSI/ISO 6780 | |||
AWS | Guide for Thermal-Spray Operator Qualification | 1 | 2002 | 671.51 A511 No. C2.16/C2.16M-2002 | ||
AWS | Specification for Underwater Welding | 1 | 1999 | 671.52 A511 No. D3.6M-99 | ||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | 1998 | ANSI/ASME B16.5a | |||
ANSI | Procedures for the Use of the Communication Contro | 1976 | ANSI X3.28 | |||
ANSI | Methods for Measuring the Real Ear Attenuation of | ANSI S12.6 | ||||
ANSI | Locks and Lock Trim | ANSI A156.2 | ||||
ANSI/ISO | Industrial Fans-Performance Testing Using Standard | 1 | 2007 | ANSI/ISO 5801 – 2007 | ||
ANSI/ISO | Quality Management – Guidelines to Quality in Proj | ANSI/ISO 10006 | ||||
Carbon Steel, Sheet, Strip and Plate | 1 | ANSI/SAE/AMS 5046B |