The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | 1998 | ANSI/ASME B16.5a | |||
ANSI/ASQC | Sampling Procedures and Tables for Inspection by V | ANSI/ASQC Z1.9 | ||||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
AWS | Specification for Carbon Steel Filler Metals for G | 1 | 671.52 A511 No. A5.18-79 | |||
ANSI/ASME | Process Piping | 2 | ANSI/ASME B31.3 | |||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
ANSI/ASME | Certification of Geometric Dimensioning and Tolera | 2000 | ANSI/ASME Y 14.5.2 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1989 Liquid Transport | 1991 | ANSI/ASME B31.4a | |||
AWS | Structural Welding Code Aluminum | 1 | 1983 | 671.51 A511 No. D1.2-83 | ||
ANSI/SAE/AS | Fitting, Tee, Standard and Reducer, Bulkhead on R | ANSI/SAE/AS 1032E | ||||
AWS | Guide for Steel Hull Welding | 1 | 1976 | 671.52 A511 No. D3.5-76 | ||
ANSI/ISO/TR | Environmental Management—Life Cycle Assessment—Exa | ANSI/ISO/TR 14049 | ||||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
ISO | Specification for Carbon Steel Electrodes and Flux | 2 | 1997 | 671.52 A511 No. A5.17/A5.17M-97 | ||
AWS | Specification for the Qualification of Welding Fab | 1 | 2000 | 671.52 A511 No. B5.17-2000 | ||
AWS | Specification for Welding of Presses and Press Com | 1 | 1997 | 671.52 A511 No. D14.5-97 | ||
ANSI/SAE | Airspeed Tubes Electrically Heated | 1 | 2008 | ANSI/SAE AS 393B-2008 | ||
ANSI | For Plastic Lavatories | 1986 | ANSI Z124.3 | |||
ANSI | Data Application Identifier Standard | 1995 | ANSI MH10.8.2 | |||
AWS | Specification for the Qualification of Welding Edu | 1 | 671.52 A511 No. B5.5-2000 | |||
AWS | Sheet Metal Welding Code | 1 | 671.51 A511 No. D9.1-0 | |||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2 | 1997 | ANSI/ISO 14040 | ||
ANSI/IEEE | IEEE Standard Letter Symbols for Units of Measurem | 1978 | ANSI/IEEE 260 | |||
ANSI | Gear and Spline Drawing Standards Part 2 – Bevel a | ANSI Y14.7.2 | ||||
ANSI | Roll Forming and Roll Bending Machines-Safety Requ | ANSI B11.12 | ||||
AWS | Specification for Automotive Weld Quality - Resist | 1 | 671.52 A511 No. D8.1M-2007 | |||
ANSI/ASME | Buttwelding Ends | 1 | ANSI/ASME B16.25 – 2007 | |||
ANSI | Safety Requirements for Floor and Wall Opening,, | 1973 | ANSI A12.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.9 – 1996 Slings | 1997 | ANSI/ASME B30.9a | |||
ANSI/IEEE | Graphic Symbols for Electrical and Electronics Dia | ANSI/IEEE 315 | ||||
ANSI/ASME | Handbook –A17.1-- Safety Code for Elevators and Es | 1996 | ANSI/ASME A17.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.9 – 1992 Safety Standard | ANSI/ASME B56.9a | ||||
SMACNA | HVAC Duct Construction Standards Metal and Flexibl | SMACNA 1035 | ||||
ANSI/SAE/AMS | Steel, Bars, and Forgings 0.18-0.23C (SAE 1022) | ANSI/SAE/AMS 5070H | ||||
API | Use of Pressure-Vacuum Vent Valves for Atmospheric | 1 | 665.5028 A51 No. 2521 | R1987, R1993 | ||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | ANSI/ASME B30.21c | ||||
PIP | Design of Piping Loads on Rotating Machinery Nozzl | PIP RECE002 | ||||
ANSI/ASME | Welded and Seamless Wrought Steel Pipe | 1995 | ANSI/ASME B36.10M | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1989 Power Piping | 1991 | ANSI/ASME B31.1c | |||
AWS | Recommended Practices for Resistance Welding | 1 | 2000 | 671.51 A511 No. C1.1M/C1.1-2000 | ||
ANSI/SAE/AMS | Heat Treatment of Wrought Aluminum Alloy Parts | ANSI/SAE/AMS 2770G | ||||
ANSI/ASME | Backwater Valves | ANSI/ASME A112.14.1 | ||||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 1978 | 671.52 A511 No. F1.1-76 | ||
ANSI | For Plastic Bathtub Units | ANSI Z124.1 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-208-96 | ||
AWS | Specification for Low Alloy Steel Covered Arc Weld | 1 | 1981 | 671.51 A511 No. A5.5-81 | ||
ANSI/SAE | Steel Bars, Forgings, and Tubing | 1 | 2009 | ANSI/SAE AMS 6448K – 2009 | ||
ANSI/SAE/AMS | Steel Bars, Forgings, and Tubing 0.15-0.20C (SAE 1 | 1 | 5069F | |||
ANSI | Graphic Symbols for Electrical Wiring and Layout D | 1972 | ANSI Y32.9 |