The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | ANSI/ASME B31.5b | ||||
ANSI/ASME | Overhead Hoists (Underhung) | ANSI/ASME B30.16 | ||||
ANSI | Specifications for Ceramic Tiles | 1988 | ANSI A137.1 | |||
ANSI/TIA/EIA | Structural Standards for Steel Antenna Towers & An | ANSI/TIA/EIA 222-F | ||||
ANSI/ISO/TS | Quality Systems – Automotive Suppliers – Particula | ANSI/ISO/TS 16949 | ||||
AWS | Standard Procedures for Determination of Moisture | 1 | 671.52 A511 No. A4.4M-2001 | |||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1995 | ANSI/ASME CSD-1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1994 | ANSI/ASME B31.3b | |||
AWS | Uniform Designation System of Oxyfuel Nozzles | 1 | 671.52 A511 No. C4.5M-2000 | |||
AWS | Guide for the Joining of Wrought Nickel-Based Allo | 1 | 671.52 A511 No. G2.1M/G2.1-2002 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1991 | 671.52 A511 No. B2.1.011-91 | ||
AWS | Filler Metal Procurement Guidelines | 1 | 1993 | 671.51 A511 No. A5.01-93 | ||
ANSI | Rigid Steel Conduit - Zinc Coated | ANSI C80.1 | ||||
ANSI | Construction and Demolition Operations – Scaffoldi | ANSI A10.8 | ||||
ANSI/SAE/AS | Fitting, Elbow, 45 Standard and Reducer Bulkhead, | ANSI/SAE/AS 1040E | ||||
ANSI | Personal Protection – Protective Footwear | 1991 | ANSI Z41 | |||
ANSI | Safety Requirements for Electrical and Electronic | 1974 | ANSI C39.5 | |||
ANSI/ASME | Handbook –A17.1-- Safety Code for Elevators and Es | ANSI/ASME A17.1 | ||||
ANSI | Addenda to ANS Z21.13 - 1987 for Gas-Fired Low-Pre | ANSI Z21.13a | ||||
ANSI/ISO/DIS | Environmental Management – Vocabulary | 1997 | ANSI/ISO/DIS 14050 | |||
ANSI/IEEE | IEEE Guide to Software Requirements Specifications | 1984 | ANSI/IEEE 830 | |||
AWS | Specification for Welding Procedure and Performanc | 1 | 671.52 A511 No. B2.1-98 | |||
AWS | Recommended Practices for Gas-Shielded-Arc Welding | 1 | 671.51 A511 No. D10.7-60 | |||
AWS | Recommended Practices for Laser Beam Welding, Cutt | 1 | 1998 | 671.52 A511 No. C7.2-98 | ||
AWS | Method for Sount Level Measurement of Manual Arc W | 1 | 1978 | 671.52 A511 No. F6.1-78 | ||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and G | 1994 | ANSI/ASME B30.2d | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 1995 | ANSI/ASCE 7 | |||
ANSI/BHMA | Power Operated Pedestrian Doors | 2005 | ANSI/BHMA A156.10 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1 | 2012 | ANSI/ASME B31.8 | ||
ANSI/IEEE | IEEE Standard Reference Designations for Electrica | ANSI/IEEE 200 | ||||
ANSI/IEEE | IEEE Recommended Practice for Grounding of Industr | ANSI/IEEE 142 | ||||
ANSI/ASME | Safety Standard for Industrial Crane Trucks (R2000 | ANSI/ASME B56.7 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | ANSI/ASME B31.1b | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | ANSI/ASME B30.2b | ||||
ANSI/ASME | Guide for Emergency Personnel | 1999 | ANSI/ASME A17.4-1999 | |||
ANSI/SAE/AMS | Hard Anodic Coating of Magnesium Alloys Alkaline T | ANSI/SAE/AMS 2466A | ||||
ANSI/ISO | Quality Assurance for Measuring Equipment – Part 2 | 2 | ANSI/ISO 10012-2 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.013-91 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1989 Gas Transmission | 1992 | ANSI/ASME B31.8c | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | 1996 | ANSI/ASME B30.20a | |||
AWS | Specification for Automotive Frame Weld Quality - | 1 | 671.52 A511 No. D8.8-79 | |||
AWS | Standard Procedures for Determination of Moisture | 1 | 2001 | 671.52 A511 No. A4.4M-2001 | ||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1 | ANSI/ASME CSD-1-2009 | |||
AWS | Standard Guide for Describing Arc Welds in Compute | 1 | 1992 | 671.52 A511 No. A9.1-92 | ||
ANSI | For Financial Services - Financial Transaction Car | ANSI X4.16 | ||||
ANSI | Machine Tools - Mechanical Power Presses – Safety | ANSI B11.1 | ||||
ANSI/UL | Steel Underground Tanks for Flammable and Combusti | 1976 | ANSI/UL 58 | |||
ANSI/NSF | Plastics Piping Components and Related Materials | 1996 | ANSI/NSF 14 | |||
ANSI | Additional controls for Use with ANS Code for Info | 1979 | ANSI X3.64 | |||
ANSI | Product Safety Signs and Labels | 1 | 2011 | ANSI Z535.4 |