The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Keys and Keyseats | 1967 | ANSI B17.1 | |||
ANSI/ICC | Manufactured Housing Construction and Safety Stan | 2 | ANSI/ICC 2.0 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.6 – 1987 Safety Standard | ANSI/ASME B56.6a | ||||
ISO | Mechanical Vibration – Measurement and Evaluation | 2001 | ANSI/ISO 5349-1-2001 | |||
ANSI/ISO | Quality Management Systems – Fundamentals and Voca | 2000 | ANSI/ISO 9000 | |||
ANSI/ASQC | Quality Management and Quality System Elements: Pa | 1994 | ANSI/ASQC Q9004-1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1989 Gas Transmission | 1990 | ANSI/ASME B31.8a | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | 1989 | ANSI/ASME B30.20c | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1991 | 671.52 A511 No. B2.1.014-91 | ||
AWS | Specification for Covered Carbon Steel Arc Welding | 1 | 1981 | 671.51 A511 No. A5.1-81 | ||
AWS | Recommended Practices for Air Carbon Arc Gouging a | 1 | 671.52 A511 No. C5.3-91 | |||
AWS | Specification for Use and Performance of Transpare | 1 | 671.52 A511 No. F2.3M-2001 | |||
AWS | Filler Metal Comparison Charts | 1 | 671.52 A511 No. A5.0-83 | |||
AWS | Recommended Practices for Resistance Welding | 1 | 2000 | 671.51 A511 No. C1.1M/C1.1-2000 (R2006) | ||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 1999 | 671.52 A511 No. F1.1-99 | ||
ANSI/ASME | Building Services Piping | ANSI/ASME B31.9 | ||||
ANSI | Machine Screws and Machine Screw Nuts | ANSI B18.6.3 | ||||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ISO | End-Suction Centrifugal Pumps (Rating 16 Bar) – De | ANSI/ISO 2858:1975 | ||||
ANSI/UL | Office Appliances and Business Equipment | ANSI/UL 114 | ||||
ANSI/NEMA | Motors and Generators | ANSI/NEMA MG1 | ||||
ANSI/ASME | Face-to-Face and End-to-End Dimensions of Valves | ANSI/ASME B16.10-2009 | ||||
ANSI/ASME | Large Diameter Steel Flanges | ANSI/ASME B16.47 | ||||
ANSI/SAE/AS | Fitting, Adaptor, Port, Reducer | ANSI/SAE/AS 5172A | ||||
ANSI/AMS | Rods, Sheets, and Molded Shapes, Polychlorotrifluo | ANSI/AMS 3650 Rev C | ||||
AWS | Specification for Nickel-Alloy Electrodes for Flux | 1 | 671.52 A511 No. A5.34/A5.34M-2007 | |||
AWS | Structural Welding Code Aluminum | 1 | 671.51 A511 No. D1.2-83 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1996 Side Boom Tract | 1997 | ANSI/ASME B30.14a | |||
ANSI/ASME | Safety Standard for Belt Manlifts | 1985 | ANSI/ASME A90.1 | |||
ANSI/ASME | Overhead Hoists (Underhung) | 1 | 2012 | ANSI/ASME B30.16 | ||
ANSI | For Plastic Water Closet Bowls and Tanks | 1986 | ANSI Z124.4 | |||
ANSI | For the Use of Industrial and Commercial Steel Sto | 1984 | ANSI MH16.2 | |||
ANSI/ISO | Non-Destructive Testing-Radiographic Examination o | ANSI/ISO 5579 | ||||
ANSI/ASQC | Quality Management and Quality System Elements – G | ANSI/ASQC Q94 | ||||
ANSI | Specifications for Door and Frame Preparation for | 1976 | ANSI A115.1 | |||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 1998 | ANSI/ISO 14041 | |||
ANSI/IEEE | American National Standard for Metric Practice | 1992 | ANSI/IEEE 268 | |||
ANSI/SAE/AMS | Core, Flexible Honeycomb, Polyamide Paper Base, Ph | ANSI/SAE/AMS 3713D | ||||
ANSI/ASME | Gage Blocks | 2002 | ANSI/ASME B89.1.9 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1987 Chemical Plant a | 1989 | ANSI/ASME B31.3c | |||
AWS | Standard Symbols for Welding, Brazing, and Nondest | 2 | 1998 | 671.52 A511 No. A2.4-98 | ||
AWS | Specificatio for Calibration and Performance Testi | 1 | 2007 | 671.52 A511 No. A10.1M-2007 | ||
AWS | Sheet Metal Welding Code | 1 | 671.52 A511 No. D9.1M/D9.1-2006 | |||
ANSI/ASHRAE/ACCA | Peak Cooling and Heating Load Calculations in Buil | 1 | ANSI/ASHRAE/ACCA 183 – 2007 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.007-90 | |||
AWS | Standard Welding Procedure Specifications (WPS) fo | 1 | 671.52 A511 No. B2.1.008-90 | |||
AWS | Structural Welding Code Aluminum | 1 | 1983 | 671.51 A511 No. D1.2-83 | ||
AWS | Guide for Steel Hull Welding | 1 | 1976 | 671.52 A511 No. D3.5-76 | ||
ANSI | Industrial Security for Nuclear Power Plants | ANSI N18.17 | ||||
ANSI/ASME | Process Piping | 2 | ANSI/ASME B31.3 |