The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 671.52 A511 No. A5.10-88 | |||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 671.51 A511 No. D10.8-78 | |||
ANSI/ASHRAE | Energy Standard for Buildings Except Low-Rise Resi | 1 | 2007 | ANSI/ASHRAE 90.1 – 2007 | ||
ANSI/ASME | Standard for the Qualification of Elevator Inspect | 1 | 2007 | ANSI/ASME QEI-1-2007 | ||
ANSI | For Safety Glazing Materials for Glazing Motor Veh | 1983 | ANSI Z26.1 | |||
ANSI | Metric Module, Involute Splines (R1989) | 1980 | ANSI B92.2M | |||
ANSI/SAE/AS | Adhesive, Film Form, Metallic Structural Sandwich | ANSI/SAE/AS A – 25463 | ||||
ANSI/ISO | Quality Management—Guidelines for Training | ANSI/ISO 10015 | ||||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 | ||||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | ANSI Z4.3 | ||||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 2001 | ANSI/ASME B30.2 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | 1998 | ANSI/ASCE 7 | ||
AWS | Specification for Carbon Steel Electrodes and Rods | 1 | 2001 | 671.52 A511 No. A5.18/A5.18M-2001 | ||
AWS | Specification for the Qualification of Welding Ins | 1 | 2001 | 671.52 A511 No. B5.2-2001 | ||
ANSI | Data Application Identifier Standard | ANSI MH10.8.2 | ||||
ANSI | Ductile Iron Fittings 3 in. through 24 in. for Gas | ANSI A21.14 | ||||
ANSI/ISO | Quality Systems – Guidelines for Performance Impro | ANSI/ISO 9004 | ||||
ANSI/AWWA | Coal-Tar Protective Coatings and Linings for Steel | ANSI/AWWA C203 | ||||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 671.52 A511 No. F1.1-92 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ISO | Quality Management Systems – Requirements | 2000 | ANSI/ISO 9001 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | ANSI/ASME B30.21a | ||||
ANSI/AWWA | Ductile Iron and Gray-Iron Fittings, 3 in. Through | 1982 | ANSI/AWWA C110/A21.10 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
ANSI/ASME | Below the Hook Lifting Devices | 1999 | ANSI/ASME B30.20 | |||
ANSI/ASSE | Performance Requirements for Temperature Actuated | 2003 | ANSI/ASSE 1017 – 2003 | |||
AWS | Bridge Welding Code | 1 | 1988 | 671.51 A511 No. D1.5-88 | ||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 2002 | 671.52 A511 No. C2.20/C2.20M-2002 | ||
ISO | Specification for Carbon and Low Alloy Steel Elect | 1 | 671.52 A511 No. A5.25-91 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1-84 | |||
AWS | Specification for Welding of Austenitic Stainless | 1 | 1999 | 671.52 A511 No. D18.1-99 | ||
ANSI/ASME | Side Boom Tractors | 2010 | ANSI/ASME B30.14-2010 | |||
ANSI | Engineering Method for the Determination of Sound | 1992 | ANSI S12.12 | |||
CAN/CSA | North American Specification for the Design of Col | CAN/CSA S136-01 | ||||
ANSI/KCMA | Recommended Performance and Construction Standards | ANSI/KCMA A161.1 | ||||
ANSI/ASME | Pipe Threads, General Purpose (inch) (R1992, 2001) | 3 | ANSI/ASME | |||
ANSI | For the Safe Use of Lasers in Health Care Faciliti | ANSI Z136.3 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 - 1987 Overhead Hoists | 1990 | ANSI/ASME B30.16b | |||
ANSI/ASME | Acme Screw Threads (R2004) | 1997 | ANSI/ASME B1.5 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-210-96 | ||
AWS | Specification for Copper and Copper Alloy Covered | 1 | 1976 | 671.51 A511 No. A5.6-76 | ||
ANSI | Control Valve Seat Leakage | ANSI B16.104 | ||||
AWS | Specification for Welding Electrodes and Rods for | 1 | 671.52 A511 No. A5.15-90 | |||
ANSI/IEEE | IEEE Recommended Practice for Energy Conservation | ANSI/IEEE 739 | ||||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | ANSI/ASME CSD-1 | ||||
ANSI/ASME | Valves-Flanged Threaded and Welding End | ANSI/ASME B16.34-2009 | ||||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
AWS | Guide for Steel Hull Welding | 1 | 671.52 A511 No. D3.5-76 |