The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | For Safe Use of Lasers in Health Care Facilities | 2005 | ANSI Z136.3 | |||
ANSI | Protective Coatings (Paints) for the Nuclear Indus | 1974 | ANSI N512 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | ANSI/ASME B30.21a | ||||
AWS | Guide for Steel Hull Welding | 1 | 671.52 A511 No. D3.5-76 | |||
AWS | Structural Welding Code - Sheet Steel | 1 | 671.52 A511 No. D1.3-98 | |||
ANSI | Test Procedure and Acceptance Criteria for Physica | 1980 | ANSI A151.1 | |||
ANSI | Control Valve Seat Leakage | ANSI B16.104 | ||||
ANSI/UL | Access Control System Units | ANSI/UL 294 | ||||
ANSI/NACE | Sulfide Stress Cracking Resistant Metallic Materia | ANSI/NACE MR0175 | ||||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 1978 | 671.52 A511 No. C4.2-78 | ||
ANSI/ASME | Buttwelding Ends | ANSI/ASME B16.25 | ||||
ANSI/ACI | Evaluating the Performance of Post-Installed Mecha | ANSI/ACI 355.2/355.2R | ||||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 1974 | 671.52 A511 No. A4.2-74 | ||
AWS | Specification for Welding Shielding Gases | 1 | 1997 | 671.52 A511 No. A5.32/A5.32M-97 | ||
ANSI/ISO | Environmental Labels and Declarations – Self-Decla | 1999 | ANSI/ISO 14021 | |||
ANSI/IEEE | IEEE Standard Requirements, Terminology, and Test | 1972 | ANSI/IEEE 32 | |||
ANSI/SAE/AS | Packing, Preformed-O-Ring Seal | ANSI/SAE/AS 3582 (R2006) | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.003-90 | |||
ANSI/ASME | Safety Standard for Operator Controlled Industria | 1992 | ANSI/ASME B56.9 | |||
ANSI/ASME | Interpretations – ASME B31.1 No. 14 Cases No. 9, | ANSI/ASME B31.1 | ||||
ANSI/ISO | Radiography of Welds and Viewing Conditions for Fi | ANSI/ISO 2504 | ||||
ANSI/ASQC | Quality Management and Quality Assurance Standards | ANSI/ASQC Q90 | ||||
ANSI/ASME | Floating Cranes and Floating Derricks | 2004 | ANSI/ASME B30.8 | |||
ANSI/ASHRAE/IESNA | Energy Standard for Buildings Except Low-Rise Resi | 2 | 2001 | ANSI/ASHRAE/IESNA 90.1 | ||
AWS | Specification for Welding of Austenitic Stainless | 1 | 1999 | 671.52 A511 No. D18.1-99 | ||
ANSI/ASME | Side Boom Tractors | 2010 | ANSI/ASME B30.14-2010 | |||
AWS | Specification for Tungsten and Tungsten-Alloy Elec | 1 | 671.52 A511 No. A5.12/A5.12M-98 | |||
AWS | Recommended Safe Practices for Thermal Spraying | 1 | 671.51 A511 No. C2.1-73 | |||
CAN/CSA | Commentary on North American Specification for the | 2001 | CAN/CSA S136 | |||
ANSI/NSPI | Standard for Public Swimming Pools | 1991 | ANSI/NSPI 1 | |||
ANSI | Fundamentals Governing the Design and Operation of | 1979 | ANSI Z9.2 | |||
ANSI | Thread Forming and Thread Cutting Tapping Screws a | 1981 | ANSI B18.6.4 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1996 Process Piping | ANSI/ASME B31.3b | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | ANSI/ASME B30.11c | ||||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 671.52 A511 No. F1.1-92 | |||
ANSI/ASME | Safety Code for Elevators and Escalators | 2007 | A17.1 - 2007 | |||
ANSI | Data Application Identifier Standard | ANSI MH10.8.2 | ||||
ANSI | Ductile Iron Fittings 3 in. through 24 in. for Gas | ANSI A21.14 | ||||
ANSI/SAE/AS | Fitting, Union, Tube, .375 Bulkhead | ANSI/SAE/AS 5406C | ||||
ANSI/ISO | Environmental Labels and Declarations – General Pr | ANSI/ISO 14020 | ||||
AWS | Local Heat Treatment of Welds in Piping and Tubing | 1 | 1975 | 671.51 A511 No. D10.10-75 | ||
AWS | Recommended Practices for Automotive Weld Quality | 1 | 1988 | 671.52 A511 No. D8.7-88 | ||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 | ||||
ANSI | Personal Protection – Protective Footwear | ANSI Z41 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.010-90 | ||
AWS | Standard for AWS Certified Welders | 1 | 1989 | 671.51 A511 No. QC3-89 | ||
ANSI/ISO | Non-Destructive Testing-Industrial Radiographic Il | 1985 | ANSI/ISO 5580 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | 1984 | ANSI/ASME B31.8a | |||
ANSI/BOMA | Standard Method for Measuring Floor Area in Office | ANSI/BOMA Z65.1 |