The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Fuel Gas Piping | ANSI B31.2 | ||||
AWS | Standard for Use of the International System of Un | 1 | 671.52 A511 No. SI10-97 | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 – 2008 | ||||
ANSI/ASME | Safety Code for Elevators and Escalators | 1 | ANSI/ASME A17.1-2010 | |||
ANSI/SAE/AS | Adhesive, Film Form, Metallic Structural Sandwich | ANSI/SAE/AS A – 25463 | ||||
AWS | Specification for Filler Metals for Brazing and Br | 1 | 671.52 A511 No. A5.8-92 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10-90 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
AWS | Structural Welding Code Aluminum | 1 | 1997 | 671.52 A511 No. D1.2-97 | ||
ANSI/ASME | Slings | 2003 | ANSI/ASME B30.9 | |||
ANSI/ASME | Valves-Flanged Threaded and Welding End | 2009 | ANSI/ASME B16.34-2009 | |||
ANSI/ASME | Safety Code for Elevators and Escalators | 1993 | ANSI/ASME A17.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.6 – 1987 Safety Standard | 1988 | ANSI/ASME B56.6a | |||
ANSI/ASME | Power Piping | 1998 | ANSI/ASME B31.1 | |||
ANSI/ASSE | Safety Requirements for Workplace Walking/Working | ANSI/ASSE A1264.1 – 2007 | ||||
ANSI | Gas Water Heaters - Volume III | 1987 | ANSI Z21.10.3 | |||
ANSI | Overhead and Gantry Cranes | 1976 | ANSI B30.2.0 | |||
AWS | Recommended Practices for Gas Tungsten Arc Welding | 1 | 2000 | 671.51 A511 No. D10.6/D10.6-2000 | ||
AWS | Specification for Welded Joints in Machinery and E | 1 | 1997 | 671.52 A511 No. D14.4-97 | ||
API | Evaporative Loss from Low-Pressure Tanks | 1 | 665.5028 A51 No. 2516 | R1993 | ||
ANSI/ASME | Refrigeration Piping and Heat Transfer Components | ANSI/ASME B31.5 | ||||
ANSI/ASME | Overhead Hoists (Underhung) | ANSI/ASME B30.16 | ||||
ANSI/ISO | Quality Systems – Guidelines for Performance Impro | 2000 | ANSI/ISO 9004 | |||
ANSI/AWWA | Coal-Tar Protective Coatings and Linings for Steel | 2002 | ANSI/AWWA C203 | |||
AWS | Specification for Low Alloy Steel Electrodes and F | 1 | 1990 | 671.52 A511 No. A5.23-90 | ||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 1988 | 671.52 A511 No. A5.10-88 | ||
ANSI/AWWA | Steel Water Pipe – 6 in. (150 mm) and larger | 1997 | ANSI/AWWA C200 | |||
AWS | Specification for Low-Alloy Steel Electrodes and F | 1 | 1997 | 671.52 A511 No. A5.23/A5.23M-97 | ||
ISO | Specification for Bare Aluminum and Aluminum Alloy | 1 | 1992 | 671.52 A511 No. A5.10-92 | ||
ANSI/IPC | Acceptability of Electronic Assemblies | ANSI/IPC A-610D | ||||
ISO | Petroleum and Natural Gas Industries – Packaged R | 2002 | ANSI/ISO 13631:2002 (E) | |||
ANSI/ASME | Quality Assurance and Certification of Safety and | ANSI/ASME SPPE-1 | ||||
ANSI/SAE/AS | Fitting, Port Plug and Bleeder | ANSI/SAE/AS 5169 | ||||
AWS | Specification for Friction Welding of Metals | 1 | 671.52 A511 No. C6.2/C6.2M-2006 | |||
ANSI/ISO | Hydraulic Fluid Power – Cleanliness of Parts and C | ANSI/ISO 18413 | ||||
ANSI | Method for the Measurement of Real Ear Protection | ANSI S3.19 | ||||
AWS | Methods for Sampling and Analyzing Gases from Weld | 1 | 671.52 A511 No. F1.5-96 | |||
ANSI | Butts and Hinges | ANSI A156.1 | ||||
ANSI/BHMA | Power and Manual Operated Revolving Pedestrian Doo | ANSI/BHMA A156.27 | ||||
ANSI/TIA/EIA | Structural Standards for Steel Antenna Towers & An | 1996 | ANSI/TIA/EIA 222-F | |||
ISO | Specification for Zirconium and Zirconium Alloy We | 1 | 671.52 A511 No. A5.24-90 | |||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 671.51 A511 No. A5.7/A5.7M-2007 | |||
ANSI/ASME | Backwater Valves | ANSI/ASME A112.14.1 | ||||
ANSI | For Plastic Bathtub Units | ANSI Z124.1 | ||||
ANSI/NISO | Information Retrieval Application Service Definiti | 1 | 2003 | ANSI/NISO Z39.50 – 2003 | ||
ANSI/ASME | Pipe Flanges and Flanged Fittings | 1996 | ANSI/ASME B16.5 | |||
ANSI/ASME | Mobile and Locomotive Cranes | 1 | 2011 | ANSI/ASME B30.5-2011 | ||
ANSI/ASQC | Quality Systems – Model for Quality Assurance in F | 1987 | ANSI/ASQC Q93 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | 1991 | ANSI/ASME B31.5b | |||
ANSI | For Personnel Protection – Lockout/Tagout of Energ | 1982 | ANSI Z244.1 |