The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Recommended Practices for Automotive Welding Desig | 1 | 671.52 A511 No. D8.4-61 | |||
STI | Standard for the Inspection of Aboveground Storage | 1 | STI SP001 – 2006 | |||
ANSI/ISO/ASQC | Quality Management – Guidelines for Configuration | 1995 | ANSI/ISO/ASQC Q10007 | |||
ANSI/IEEE | IEEE Standard for Software Quality Assurance Plans | 1989 | ANSI/IEEE 730.1 | |||
AWS | Specification for Filler Metal Standard Sizes, Pac | 1 | 671.51 A511 No. A5.02/A5.02M-2007 | |||
API | Use of Pressure-Vacuum Vent Valves for Atmospheric | 1 | 665.5028 A51 No. 2521 | R1987, R1993 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1998 Power Piping | ANSI/ASME B31.1b | ||||
ANSI/ASME | Mobile and Locomotive Cranes | ANSI/ASME B30.5 | ||||
ANSI/ASHRAE | Safety Standard for Refrigeration Systems | ANSI/ASHRAE 15 | ||||
ANSI | Method of Recording and Measuring Work Injury Expe | ANSI Z16.1 | ||||
ANSI | Building Code Requirements for Masonry | 1953 | ANSI A41.1 | |||
ANSI/UL | Steel Underground Tanks for Flammable and Combusti | ANSI/UL 58 | ||||
ANSI/NSF | Plastics Piping System Components and Related Mate | ANSI/NSF 14 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.9 – 1996 Slings | 1997 | ANSI/ASME B30.9a | |||
ANSI/ASME | Handbook –A17.1-- Safety Code for Elevators and Es | 1996 | ANSI/ASME A17.1 | |||
ANSI/ASME | Scheme for the Identification of Piping Systems (R | 1996 | ANSI/ASME A13.1 | |||
ANSI/ISO | Stationary Source Emissions – Manual Determination | ANSI/ISO 9096 | ||||
ANSI/AWWA | Steel Pipe Flanges for Water Works Service-Sizes 4 | ANSI/AWWA C207 | ||||
ANSI/ASME | Safety Standard for Low Lift and High Lift Trucks | 2004 | ANSI/ASME B56.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | 1996 | ANSI/ASME B31.1b | |||
AWS | Specification for Welding of Industrial and Mill C | 1 | 1997 | 671.51 A511 No. D14.1-97 | ||
AWS | Structural Welding Code Titanium | 1 | 2007 | 671.52 A511 No. D1.9/D1.9M-2007 | ||
ANSI | For the Use of Industrial and Commercial Steel Sto | ANSI MH16.2 | ||||
ANSI | Ductile Iron Pipe, Centrifugally Cast, for Gas | ANSI A21.52 | ||||
ANSI/SAE/AS | Fitting, Elbow, 90 Standard and Reducer, Bulkhead, | ANSI/SAE/AS 1038 | ||||
AWS | Specification for Carbon Steel Electrodes and Rods | 1 | 1993 | 671.52 A511 No. A5.18-93 | ||
ANSI | Method of Recording and Measuring Work Injury Expe | 1967 | ANSI Z16.1 | |||
AWS | Guide for the Visual Examination of Welds | 1 | 2000 | 671.52 A511 No. B1.11-2000 | ||
ANSI | Wing Nuts, Thumb Screws, and Wing Screws (R1983) | 1968 | ANSI B18.17 | |||
AWS | Specification for Induction Brazing | 1 | 671.52 A511 No. C3.5-99 | |||
AWS | Specification for Welding of Austenitic Stainless | 1 | 671.52 A511 No. D18.1-99 | |||
ANSI/ISO | Quality Systems – Model for Quality Assurance in P | 1994 | ANSI/ISO 9002 | |||
ANSI/AWWA | Steel Water Pipe – 6 in. (150 mm) and larger | 2003 | ANSI/AWWA C110/A21.10 | |||
AWS | Specificatio for Calibration and Performance Testi | 1 | 671.52 A511 No. A10.1M-2007 | |||
AWS | Specification for Welding Industrial and Mill Cran | 1 | 671.51 A511 No. D14.1-70 | |||
AWS | Specification for Carbon Steel Electrodes and Rods | 1 | 671.52 A511 No. A5.18/A5.18M-2001 | |||
ANSI/ASME | Refrigeration Piping | ANSI/ASME B31.5 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 - 1987 Overhead Hoists | ANSI/ASME B30.16b | ||||
ANSI/ASME | Gaging for Dryseal Pipe Threads (inch) (R2004) | ANSI/ASME B1.20.5 | ||||
ANSI | For Safe Use of Lasers in Health Care Facilities | ANSI Z136.3 | ||||
CEI/IEC | Rotating Electrical Machines – Part 1: Rating and | 2004 | CEI/IEC 60034-1:2004 | |||
ANSI/ASME | Buttwelding Ends | 1 | 2007 | ANSI/ASME B16.25 – 2007 | ||
ANSI/BHMA | Power and Manual Operated Revolving Pedestrian Doo | 1 | 2011 | ANSI/BHMA A156.27-2011 | ||
ANSI/SAE/AS | Fitting, Adaptor, Port, Reducer | ANSI/SAE/AS 5172A | ||||
ANSI/ISO | Non-Destructive Testing of Welds-Radiographic Test | ANSI/ISO 17636 | ||||
API | Shop Testing of Automatic Liquid Leval Gages | 1 | 1987 | 665.5028 A51 No. 2509B | R1997 | |
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1988 Pipe Flanges and | 1992 | ANSI/ASME B16.5a | |||
ANSI/IEEE | IEEE Standard for Binary Floating-Point Arithmetic | ANSI/IEEE 754 | ||||
ANSI/ASQC | Quality Systems - Model for Quality Assurance in P | 1987 | ANSI/ASQC Q92 | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | ANSI/ASME CSD-1a |