The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1/D1.1M-2004 | |||
API | Review of Air Toxics Emission Calculations from St | 1 | 1992 | 665.5028 A51 No. 2525 | ||
AWS | Specification for Aluminum Brazing | 1 | 671.52 A511 No. C3.7-99 | |||
AWS | Guide to Weld Discoloration Levels on Inside of Au | 1 | 671.52 A511 No. D18.2-99 | |||
ANSI/ISO | Quality Management and Quality Assurance Standards | ANSI/ISO 9000-2 | ||||
ANSI/ISO/TR | Environmental Labels and Declarations—Type III Env | 2000 | ANSI/ISO/TR 14025 | |||
ANSI/ASQC | Sampling Procedures and Tables for Inspection by V | ANSI/ASQC Z1.9 | ||||
ANSI/IESNA | Lighting for Exterior Environments | ANSI/IESNA RP-33-99 | ||||
ANSI/ISO | Quality Management and Quality Assurance Standards | ANSI/ISO 9000-1 | ||||
ANSI/ISO/TR | Environmental Management—Life Cycle Assessment—Exa | 2000 | ANSI/ISO/TR 14049 | |||
ANSI/ASQC | Sampling Procedures and Tables for Inspection By A | ANSI/ASQC Z1.4 | ||||
ANSI/IEEE | Liquid – Immersed Distribution, Power, and Regulat | 1990 | ANSI/IEEE C57.12.90 | |||
ISO | Specification for Carbon and Low-Alloy Steel Elect | 1 | 1997 | 671.52 A511 No. A5.25/A5.25M-97 | ||
ANSI/ASME | Factory-Made Wrought Steel Buttwelding Fittings | ANSI/ASME B16.9 | ||||
ANSI | Product Safety Signs and Labels | ANSI Z535.4 | ||||
ANSI | Characters Set for Optical Character Recognition ( | ANSI X3.49 | ||||
NEMA | Motors and Generators | NEMA MG1-2010 | ||||
ANSI | Screw Thread Gaging Systems for Dimensional Accept | ANSI B1.3 | ||||
ANSI/SAE/AS | Aerospace Basic Quality System | ANSI/SAE/AS 9000 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1992 Refrigeration Pi | ANSI/ASME B31.5a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1987 Overhead Hoists | ANSI/ASME B30.16c | ||||
ANSI/ASME | Side Boom Tractors | 1985 | ANSI/ASME B30.14 | |||
ANSI/ASME | Interpretations—ANSI/ASME A17.1 – 1993 No. 17, 18, | ANSI/ASME A17.1 | ||||
ANSI/SAE/AS | Fitting, Port Plug and Bleeder | ANSI/SAE/AS 5169 | ||||
ANSI/ISO | Hydraulic Fluid Power – Cleanliness of Parts and C | ANSI/ISO 18413 | ||||
AWS | Guide to Weld Discoloration Levels on Inside of Au | 1 | 1999 | 671.52 A511 No. D18.2-99 | ||
ANSI/ASME | Mobile and Locomotive Cranes | 2007 | ANSI/ASME B30.5-2007 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.009-90 | |||
ANSI | Basic Criteria for Indexes (R1974) | 1968 | ANSI Z39.4 | |||
ANSI | Safety Requirements for the Construction, Care and | 1981 | ANSI B153.1 | |||
AWS | Commentary on Structural Welding Code Aluminum | 1 | 1983 | 671.51 A511 No. D1.2A-83 | ||
AWS | Guide for Steel Hull Welding | 1 | 1993 | 671.52 A511 No. D3.5-93 | ||
ANSI/ASME | Safety Standard for Rough Terrain Forklift Trucks | 1987 | ANSI/ASME B56.6 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | 1997 | ANSI/ASME B31.1c | |||
AWS | Specification for Tungsten and Tungsten-Aloy Elect | 1 | 671.52 A511 No. A5.12/A5.12M-98 | |||
API | Pipeline Variable Uncertainties and Their Effects | 1 | 1993 | 665.5028 A51 No. 1149 | ||
AWS | Flame Spraying of Ceramics | 1 | 671.51 A511 No. C2.13-70 | |||
AWS | Recommended Practices for Automotive Welding Desig | 1 | 671.52 A511 No. D8.4-61 | |||
ANSI/ICC | Accessible and Usable Buildings and Facilities | 2 | 2003 | ANSI/ICC A117.1-2003 | ||
STI | Standard for the Inspection of Aboveground Storage | 1 | STI SP001 – 2006 | |||
ANSI/IEEE | Graphic Symbols for Electrical and Electronics Dia | ANSI/IEEE 315 | ||||
ANSI/ISO | Guidelines for Auditing Quality Systems – Part 2: | 1991 | ANSI/ISO 10011-2 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.9 – 1992 Safety Standard | ANSI/ASME B56.9a | ||||
ANSI/AWWA | AWWA Standard for Welded Steel Tanks for Water Sto | 1996 | ANSI/AWWA D100 | |||
AWS | Specification for Low-Alloy Steel Electrodes and F | 1 | 1997 | 671.52 A511 No. A5.23/A5.23M-97 | ||
ISO | Specification for Bare Aluminum and Aluminum Alloy | 1 | 1992 | 671.52 A511 No. A5.10-92 | ||
ANSI/ASME | Addenda to ANSI/ASCME A17.1 – 1993 Safety Code for | ANSI/ASME A17.1b | ||||
ANSI | Specifications for Accident Prevention Signs | ANSI Z35.1 | ||||
ANSI | Specifications for Dry Cells and Batteries | ANSI C18.1 | ||||
ANSI/UL | Strainers for Flammable Fluids and Anhydrous Ammon | 1977 | ANSI/UL 331 |