The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Methods for Performance Evaluation of Coordinate M | ANSI/ASME B89.1.12M | ||||
ANSI/SAE/AS | Audit Summary and Supplier Profile Instructions | ANSI/SAE/AS 9000 App.1 | ||||
ANSI/ISO | Guidelines for Environmental Auditing – Qualificat | 2 | ANSI/ISO 14012 | |||
ANSI/ASME | Guide for Emergency Personnel | 1999 | ANSI/ASME A17.4-1999 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | ANSI/ASME A17.1c | ||||
ANSI | Information Retrieval Service Definition and Proto | ANSI Z39.50 | ||||
ANSI/SAE/AS | Fitting, Tee, Standard and Reducer, Bulkhead on R | ANSI/SAE/AS 1032E | ||||
AWS | Specification for Consumables Used for Electrogas | 1 | 671.52 A511 No. A5.26-78 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1-90 | |||
AWS | Specification for Titanium and Titanium Alloy Weld | 1 | 671.52 A511 No. A5.16-90 | |||
ANSI/ASME | Slings | 1 | 2006 | ANSI/ASME B30.9 – 2006 | ||
ANSI | Methods of Measurement of Radio-Noise Emissions fr | ANSI C63.4 | ||||
ANSI/ASME | Dimensioning and Tolerancing | 1 | 2009 | ANSI/ASME Y14.5-2009 | ||
ANSI | Safety Requirements for Material Hoists | ANSI A10.5 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Pro | 1994 | ANSI/ASQC Q9002 | |||
AWS | Specification for Resistance Welding of Carbon and | 1 | 1999 | 671.51 A511 No. C1.4M/C1.4-99 | ||
ANSI/ASME | Refrigeration Piping and Heat Transfer Components | 2001 | ANSI/ASME B31.5 | |||
AWS | Laboratory Method for Measuring Fume Generation Ra | 1 | 1992 | 671.52 A511 No. F1.2-92 | ||
ANSI | Additional controls for Use with ANS Code for Info | 1979 | ANSI X3.64 | |||
ANSI | Buttress Inch Screw Thread 7/45 Form (R2003) | 1973 | ANSI B1.9 | |||
API | Evaporative Loss from Low-Pressure Tanks | 1 | 1962 | 665.5028 A51 No. 2516 | R1993 | |
ANSI/ISO/DIS | Environmental Management – Life Cycle Assessment – | 1997 | ANSI/ISO/DIS 14041 | |||
ANSI/IEEE | IEEE Standard for Software Test Documentation (R19 | 1983 | ANSI/IEEE 829 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | ANSI/ASME B31.1b | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | ANSI/ASME B30.2b | ||||
AWS | Standard Welding Procedures Specification (WPS) fo | 1 | 1996 | 671.52 A511 B2.1-1-204-96 | ||
AWS | Specification for Aluminum and Aluminum Alloy Elec | 1 | 1991 | 671.51 A511 No. A5.3-91 | ||
ANSI/ASME | Overhead Hoists (Underhung) | 1987 | ANSI/ASME B30.16 | |||
AWS | Structural Welding Code Titanium | 1 | 671.52 A511 No. D1.9/D1.9M-2007 | |||
ANSI/ASME | Unified Inch Screw Threads (R2001) | 1989 | ANSI/ASME B1.1 | |||
AWS | Filler Metal Comparison Charts | 1 | 671.52 A511 no. FMC-22000 | |||
ANSI/ISO | Quality Systems – Model for Quality Assurance in P | ANSI/ISO 9002 | ||||
ANSI/AWWA | Steel Water Pipe – 6 in. (150 mm) and larger | ANSI/AWWA C110/A21.10 | ||||
ANSI/UL | Portable Sun/Heat Lamps | ANSI/UL 482 | ||||
ANSI/NACE | In-Line Inspection of Pipelines | ANSI/NACE RP0102 | ||||
ANSI | Safety Requirements for Powered Platforms for Exte | 1970 | ANSI A120.1 | |||
ANSI/ASME | Buttwelding Ends | ANSI/ASME B16.25 | ||||
ANSI/ACI | Hot Weather Concreting | ANSI/ACI 305R | ||||
ANSI/BHMA | Power Operated Pedestrian Doors | 1 | ANSI/BHMA A156.10-2011 | |||
ANSI/SAE/AMS | Carburizing and Heat Treatment of Carburizing Grad | ANSI/SAE/AMS 2759/7A | ||||
ANSI/SAE/AMS | Heat Treatment of Wrought Aluminum Alloy Parts | ANSI/SAE/AMS 2770G | ||||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 671.52 A511 No. A5.11-83 | |||
AWS | Guide for the Protection of Steel with Thermal Spr | 1 | 671.51 A511 No. C2.18-93 | |||
AWS | International Filler Metal Specifications Cross Re | 1 | 1987 | 671.52 A511 No. IFS-87 | ||
ANSI | Specifications for Credit Cards | ANSI X4.13 | ||||
ANSI/ASME | Cast Copper Alloy Threaded Fittings Classes 125 an | 2006 | ANSI/ASME B16.15-2006 | |||
ANSI | Preferred Limits and Fits for Cylindrical Ports (R | ANSI B4.1 | ||||
AWS | Structural Welding Code Sheet Steel | 1 | 1981 | 671.51 A511 No. D1.3-81 | ||
ANSI/ASME | Safety Standard for Industrial Crane Trucks (R2000 | 1987 | ANSI/ASME B56.7 | |||
AWS | Specification for Underwater Welding | 1 | 1989 | 671.52 A511 No. D3.6-89 |