The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASNT | Qualification and Certification of Nondestructive | 2001 | ANSI/ASNT CP-189 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1992 Liquid Transport | 1994 | ANSI/ASME B31.4a | |||
ANSI | Wire and Rope for Mines | ANSI M11.1 | ||||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 671.52 A511 No. C4.2-78 | |||
ANSI | For Ladders - Portable Wood - Safety Requirements | ANSI A14.1 | ||||
AWS | Specification for Resistance Welding for Aerospace | 1 | 671.52 A511 No. D17.2/D17.2M-2007 | |||
ISO | Specification for Zirconium and Zirconium Alloy We | 1 | 1990 | 671.52 A511 No. A5.24-90 | ||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 2007 | 671.51 A511 No. A5.7/A5.7M-2007 | ||
ANSI | Test Procedure and Acceptance Criteria for Physica | 2001 | ANSI A250.4 | |||
ANSI/ISO | Quality Management – Guidelines for Configuration | ANSI/ISO 10007 | ||||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | ANSI/AWWA C605 | ||||
ANSI/ASME | Interpretations – ASME B31.1 No. 14 Cases No. 9, | ANSI/ASME B31.1 | ||||
ANSI/ASME | Mobile and Locomotive Cranes | ANSI/ASME B30.5 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1985 Side Boom Tract | 1989 | ANSI/ASME B30.14c | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | 1996 | ANSI/ASME A17.3 | |||
AWS | Structural Welding Code Steel | 1 | 1990 | 671.51 A511 No. D1.1-90 | ||
AWS | Specification for Stainless Steel Electrodes for F | 1 | 671.52 A511 No. A5.22-95 | |||
AWS | Specification for Furnace Brazing | 1 | 1990 | 671.52 A511 No. C3.6-90 | ||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2000 | ANSI/ISO 14042 | |||
ANSI/IEEE | Graphic Symbols for Electrical and Electronics Dia | 1975 | ANSI/IEEE 315 | |||
ANSI | For Respiratory Protection – Respiratory Use – Phy | 1984 | ANSI Z88.6 | |||
ANSI | Dimensional Tolerances for Aluminum Mill Products | 1993 | ANSI H35.2 | |||
ANSI/ACI | Specifications for Structural Concrete | 1 | 2010 | ANSI/ACI 301 | ||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | ANSI/ISO 14041 | ||||
AWS | Guide for Components of Robotic and automatic Arc | 1 | 2007 | 671.52 A511 No. D16.2/D16.2-2007 | ||
NEMA | Motors and Generators | 2010 | NEMA MG1-2010 | |||
ANSI/ASME | Process Piping | 1 | ANSI/ASME B31.3-2010 | |||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 671.52 A511 No. A5.11-83 | |||
ANSI/SAE/AMS | Heat Treatment of Wrought Aluminum Alloy Parts | ANSI/SAE/AMS 2770G | ||||
AWS | Guide for the Protection of Steel with Thermal Spr | 1 | 671.51 A511 No. C2.18-93 | |||
ANSI/ASME | Large Diameter Steel Flanges NPS 26 Through 60 | 4 | ANSI/ASME B16.47 | |||
ANSI/AMS | Sand Magnesium Alloy Castings | ANSI/AMS 4420M | ||||
ANSI/ASME | Surface Texture (Surface Roughness, Waviness, and | 1995 | ANSI/ASME B46.1 | |||
ANSI | Dictionary of Terms for Computer-Aided Preparation | ANSI Y14.26.3 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1992 Power Piping | 1993 | ANSI/ASME B31.1b | |||
ANSI | Cast Copper Alloy Solder Joint Pressure Fittings | ANSI B16.18 | ||||
AWS | Recommended Practices for Automotive Weld Quality | 1 | 671.52 A511 No. D8.7-88 | |||
ANSI/MSS | Steel Pipeline Flanges | 1 | ANSI/MSS SP-44-2010 | |||
ISO | Specification for Bare Electrodes and Rods for Sur | 1 | 2001 | 671.52 A511 No. A5.21-2001 | ||
AWS | Specification for Corrosion Resisting Chromium and | 1 | 1981 | 671.52 A511 No. A5.9-81 | ||
ANSI/ASME | Forged Fittings, Socket-Welding and Threaded | 2005 | ANSI/ASME B16.11-2005 | |||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | ANSI/IEEE 1154 | ||||
ANSI/ASME | Nuclear Power Plant Air Cleaning Units and Compone | ANSI/ASME N509 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | ANSI/ASME B31.8a | ||||
ANSI/ASME | Overhead Hoists (Underhung) | ANSI/ASME B30.16 | ||||
ANSI/ASME | Valves – Flanged, Threaded and Welding End | 1996 | ANSI/ASME B16.34 | |||
ANSI/AMS | Classification and Inspection of Castings | ANSI/AMS 2175 | ||||
AWS | Guide for Thermal-Spray Operator Qualification | 1 | 1992 | 671.51 A511 No. C2.16-92 | ||
API | Method for Liquid Calibration of Tanks | 1 | 665.5028 A51 No. 2555 | R1997, R2002 |