The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/UL | Strainers for Flammable Fluids and Anhydrous Ammon | ANSI/UL 331 | ||||
ANSI | Graphic Symbols for Electrical Wiring and Layout D | ANSI Y32.9 | ||||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | 2005 | ANSI/ASME B30.2 – 2005 | ||
ANSI/ISO | Quality Management and Quality Assurance Standards | 1997 | ANSI/ISO 9000-3 | |||
ANSI/NACE | Petroleum and Natural Gas Industries-Materials for | ANSI/NACE MR0175/ISO 15156-1 | ||||
ANSI | Bronze Pipe Flanges and Flanged Fittings | ANSI B16.24 | ||||
ANSI/ASME | Pressure Relief Devices | 1 | 2008 | ANSI/ASME PTC 25-2008 | ||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-208-96 | |||
ANSI/ASQC | Generic Guidelines for Quality Systems | 1979 | ANSI/ASQC Z1.15 | |||
ANSI/ASME | Side Boom Tractors | 1991 | ANSI/ASME B30.14 | |||
AWS | Specification for Low Alloy Steel Covered Arc Weld | 1 | 671.51 A511 No. A5.5-81 | |||
ANSI/ASME | Interpretations—ANSI/ASME A17.3 – No. 1, 4 | ANSI/ASME A 17.3 | ||||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1992 | ANSI/ASME B31.8 | |||
AWS | Recommended Practices for Electrogas Welding | 1 | 671.52 A511 No. C5.7-2000 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | 1996 | ANSI/ASME B30.20b | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | ANSI/ASME B31.8c | ||||
AWS | Specification for Qualitification and Certificatio | 1 | 671.52 A511 No. QC10-95 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | ANSI/ASME B30.20a | ||||
ANSI/ASME | Pipe Flanges and Flanged Fittings | ANSI/ASME B16.5 | ||||
ANSI | Safety Requirements for Personal Fall Arrest Syste | 2 | ANSI Z359.1 | |||
AWS | Recommended Practices for Laser Beam Welding, Cutt | 1 | 1998 | 671.52 A511 No. C7.2-98 | ||
AWS | Method for Sount Level Measurement of Manual Arc W | 1 | 1978 | 671.52 A511 No. F6.1-78 | ||
ANSI | Personal Protection – Protective Footwear | 1991 | ANSI Z41 | |||
ANSI | Safety Requirements for Electrical and Electronic | 1974 | ANSI C39.5 | |||
ANSI | Requirements for Safety-Belts, Harnesses, Lanyards | 1991 | ANSI A10.14 | |||
ANSI/ASME | Floating Cranes and Floating Devices | ANSI/ASME B30.8-2010 | ||||
ANSI/SAE/AS | Fitting, Elbow, 90, Internal Straight Thread Port | ANSI/SAE/AS 5190 | ||||
ANSI/IEEE | Maintenance, Testing, and Replacement of Vented Le | ANSI/IEEE 450 | ||||
ANSI/ASME | Methods for Performance Evaluation of Coordinate M | ANSI/ASME B89.1.12M | ||||
AWS | Standard Procedures for Determination of Moisture | 1 | 2001 | 671.52 A511 No. A4.4M-2001 | ||
AWS | Standard Guide for Describing Arc Welds in Compute | 1 | 1992 | 671.52 A511 No. A9.1-92 | ||
AWS | Guide for the Joining of Wrought Nickel-Based Allo | 1 | 2002 | 671.52 A511 No. G2.1M/G2.1-2002 | ||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2000 | ANSI/ISO 14043 | |||
ANSI/SAE/AS | Audit Summary and Supplier Profile Instructions | ANSI/SAE/AS 9000 App.1 | ||||
ANSI | Unit Load and Transport - Package Sizes | ANSI MH10.1M | ||||
ANSI/ASME | Forged Fittings, Socket-Welding and Threaded | 2009 | ANSI/ASME B16.11-2009 | |||
ANSI/IEEE | Supplement to Graphic Symbols for Electrical and E | 1986 | ANSI/IEEE 315A | |||
ANSI/ISO | Guidelines for Environmental Auditing – Qualificat | 2 | ANSI/ISO 14012 | |||
ANSI | For Ladders - Portable Metal - Safety Requirements | ANSI A14.2 | ||||
AWS | Guide for the Visual Examination of Welds | 1 | 671.52 A511 No. B1.11-2000 | |||
ANSI/ASME | Addenda to ANSI/ASME B16.34 – 1996 Valves – Flange | 1998 | ANSI/ASME B16.34a | |||
AWS | Recommended Practices for the Brazing of Copper Tu | 1 | 671.51 A511 No. D10.13/D10.13M-2001 | |||
ANSI/AMS | Fusion Welding for Aerospace Applications | ANSI/AMS 2219 | ||||
ANSI | Product Safety Signs and Labels | 1 | 2011 | ANSI Z535.4 | ||
ANSI/ASME | Knurling (R2003) | 1984 | ANSI/ASME B94.6 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1993 | ANSI/ASME B31.3a | |||
AWS | Specification for Metal Cutting Machine Tool Weldm | 1 | 671.52 A511 No. D14.2-71 | |||
ANSI/ASME | Chemical Plant and Petroleum Refinery Piping | ANSI/ASME B31.3 | ||||
ANSI/ASHRAE | Safety Standard for Refrigeration Systems | 1 | ANSI/ASHRAE 15 - 2007 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.5 – 2000 Mobile and Locom | ANSI/ASME B30.5a |