The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Method for Sampling Airborne Particulates Generate | 1 | 671.52 A511 No. F1.1-92 | |||
ANSI/AWWA | AWWA Standard for Inspecting and Repairing Steel W | ANSI/AWWA D101 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 671.52 A511 No. F1.1-76 | |||
ANSI/AWWA | AWWA Standard for Welded Steel Tanks for Water Sto | ANSI/AWWA D100 | ||||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1992 | ANSI/ASME B31.8 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | 1996 | ANSI/ASME B30.20b | |||
ANSI/ASME | Welded and Seamless Wrought Steel Pipe | ANSI/ASME B36.10M | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1989 Power Piping | ANSI/ASME B31.1c | ||||
ANSI/NACE | Sulfide Stress Cracking Resistant Metallic Materia | 2000 | ANSI/NACE MR0175 | |||
ANSI/ISO | Non-Destructive Testing-Radiographic Examination o | 1998 | ANSI/ISO 5579 | |||
ISO | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.012-91 | |||
ANSI/UL | Strainers for Flammable Fluids and Anhydrous Ammon | ANSI/UL 331 | ||||
ANSI/NACE | Petroleum and Natural Gas Industries-Materials for | ANSI/NACE MR0175/ISO 15156-1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | 1988 | ANSI/ASME B30.20b | |||
ANSI/ASME | Buttwelding Ends | ANSI/ASME B16.25 | ||||
ANSI/ASME | Malleable Iron Threaded Fittings Classes 150 and 3 | 1998 | ANSI/ASME B16.3 | |||
ANSI/ACI | Building Code Requirements for Structural Concrete | 2 | ANSI/ACI 318/318R | |||
ANSI | Ductile Iron Fittings 3 in. through 24 in. for Gas | 1979 | ANSI A21.14 | |||
ANSI | Accepted Practices for Hydrogen Sulfide Safety Tra | 1995 | ANSI Z390.1 | |||
ANSI | Methods for the Measurement and Designation of Noi | 1985 | ANSI S12.10 | |||
ANSI/ASME | Mobile and Locomotive Cranes | ANSI/ASME B30.5-2007 | ||||
ANSI/SAE/AS | Nut, Fitting, Port | ANSI/SAE/AS 5179A | ||||
AWS | Specification for Welding Electrodes and Rods for | 1 | 1990 | 671.52 A511 No. A5.15-90 | ||
ANSI | Programming Language FORTRAN | ANSI X3.9 | ||||
AWS | Standard Methods for Mechanical Testing of Welds | 1 | 2000 | 671.52 A511 No. B4.0M-2000 | ||
AWS | Specification for the Qualification of Robotic Arc | 1 | 1999 | 671.52 A511 No. D16.4-99 | ||
ANSI | Recommended Specifications for Standard Steel Door | ANSI A250.8 | ||||
ANSI/ASME | Overhead Hoists (Underhung) | 2007 | ANSI/ASME B30.16-2007 | |||
AWS | Specification for Welding Procedure and Performanc | 1 | 671.52 A511 No. B2.1-98 | |||
AWS | Recommended Practices for Gas-Shielded-Arc Welding | 1 | 671.51 A511 No. D10.7-60 | |||
AWS | Guide for the Gas Shielded Arc Welding of Aluminum | 1 | 2000 | 671.51 A511 No. D10.7M/D10.7-2000 | ||
AWS | Specification for Underwater Welding | 1 | 1993 | 671.52 A511 No. D3.6-93 | ||
AWS | Guide for Steel Hull Welding | 1 | 671.52 A511 No. D3.5-93 | |||
ANSI/IEEE | Liquid – Immersed Distribution, Power, and Regulat | ANSI/IEEE C57.12.90 | ||||
AWS | Recommended Practices for Gas Metal Arc Welding | 1 | 671.52 A511 No. C5.6-89 | |||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA – 1 | ||||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1995 | ANSI/ASME CSD-1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1994 | ANSI/ASME B31.3b | |||
ANSI/ASME | Liquid Transportation Systems for Hydrocarbons, Li | ANSI/ASME B31.4 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1985 Side Boom Tract | ANSI/ASME B30.14d | ||||
ANSI/ICC | Accessible and Usable Buildings and Facilities | 1 | 2009 | ANSI/ICC A117.1-2009 | ||
ANSI/ISO | Environmental Labels and Declarations – General Pr | 2000 | ANSI/ISO 14020 | |||
ANSI/ICC | Manufactured Housing Construction and Safety Stan | 2 | 1998 | ANSI/ICC 2.0 | ||
AWS | Standard Procedures for Determination of Moisture | 1 | 671.52 A511 No. A4.4M-2001 | |||
ANSI/SAE/AS | Aerospace Basic Quality System | ANSI/SAE/AS 9000 | ||||
ANSI/ISO | Environmental Management – Environmental Assessmen | ANSI/ISO 14015 | ||||
ANSI/ASME | Derricks | 2003 | ANSI/ASME B30.6 | |||
ANSI/ASME | Interpretations—ANSI/ASME A17.1 – 1993 No. 17, 18, | ANSI/ASME A17.1 | ||||
ANSI/ASHRAE | Energy- Efficient Design of Low-Rise Residential B | 2001 | ANSI/ASHRAE 90.2 |