The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Methods for Performance Evaluation of Coordinate M | 1990 | ANSI/ASME B89.1.12M | |||
ANSI/ASME | Chemical Plant and Petroleum Refinery Piping | 1993 | ANSI/ASME B31.3 | |||
AWS | Specification for the Qualification of Welding Ins | 1 | 671.52 A511 No. B5.2-2001 | |||
AWS | Recommended Practices and Procedures for Welding L | 1 | 671.51 A511 No. D10.12-89 | |||
ANSI/SAE/AS | Quality Systems – Aerospace – Model for Quality As | ANSI/SAE/AS 9100A | ||||
ANSI/ISO | Guidelines for Environmental Auditing – Audit Proc | 2 | ANSI/ISO 14011 | |||
ISO | Standard Welding Terms and Definitions | 2 | 1989 | 671.52 A511 No. A3.0-89 | ||
AWS | Standard Guide for Recording Arc Weld Material Pro | 1 | 1992 | 671.52 A511 No. A9.2-92 | ||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.006-90 | |||
AWS | Railroad Welding Specification - Cars and Locomoti | 1 | 671.52 A511 No. D15.1-93 | |||
ANSI/ASHRAE | Energy-Efficient Design of Low Rise Residential Bu | 1 | ANSI/ASHRAE 90.2 – 2007 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | 1989 | ANSI/ASME B30.11a | |||
ANSI | For Ladders - Portable Metal - Safety Requirements | 1982 | ANSI A14.2 | |||
ANSI/ASME | Addenda to ANSI/ASCME A17.1 – 1993 Safety Code for | 1995 | ANSI/ASME A17.1b | |||
AWS | Guide for Components of Robotic and automatic Arc | 1 | 2007 | 671.52 A511 No. D16.2/D16.2-2007 | ||
NEMA | Motors and Generators | 2010 | NEMA MG1-2010 | |||
ANSI | Dictionary of Terms for Computer-Aided Preparation | ANSI Y14.26.3 | ||||
ANSI | Cast Copper Alloy Solder Joint Pressure Fittings | ANSI B16.18 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | ANSI/ASME B31.1a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | ANSI/ASME B30.2a | ||||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | ANSI/ASCE 7 | |||
ANSI | Graphic Symbols for Logic Diagrams | ANSI Y32.14 | ||||
ANSI | Reference Designations for Electrical and Electron | 1975 | ANSI Y32.16 | |||
ANSI | Square and Hex Bolts and Screws – Inch Series | 1992 | ANSI B18.2.1 | |||
ANSI/ISO | Quality Management and Quality Assurance Standards | 1994 | ANSI/ISO 9000-1 | |||
ANSI/ASQC | Sampling Procedures and Tables for Inspection By A | 1993 | ANSI/ASQC Z1.4 | |||
ANSI/SAE | Assembly, Installation and Torque for Flareless an | 1 | ANSI/SAE AS 5148 –1998(R2005) | |||
ANSI/ISO | Quality Management Systems – Requirements | ANSI/ISO 9001 | ||||
ANSI/UL | Reference Standard for Electrical Wires, Cables, a | 1985 | ANSI/UL 1581 | |||
ANSI/AWWA | Ductile Iron and Gray-Iron Fittings, 3 in. Through | ANSI/AWWA C110/A21.10 | ||||
AWS | Guide for Thermal-Spray Operator Qualification | 1 | 1992 | 671.51 A511 No. C2.16-92 | ||
AWS | Recommended Practices for Automotive Welding Desig | 1 | 1961 | 671.52 A511 No. D8.4-61 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1989 Gas Transmission | 1990 | ANSI/ASME B31.8b | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-210-96 | |||
ANSI/ASME | Below the Hook Lifting Devices | 1993 | ANSI/ASME B30.20 | |||
AWS | Specification for Copper and Copper Alloy Covered | 1 | 671.51 A511 No. A5.6-76 | |||
ANSI/UL | High-Efficiency, Particulate, Air Filter Unit | ANSI/UL 586 | ||||
ANSI/NACE | Fabrication Details, Surface Finish Requirements a | ANSI/NACE RP0178 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1991 | 671.52 A511 No. B2.1.013-91 | ||
AWS | Specification for Filler Metal Standard Sizes, Pac | 1 | 2007 | 671.51 A511 No. A5.02/A5.02M-2007 | ||
API | Calculation Workbook for Oil and Gas Production Eq | 1 | 665.5028 A51 No. 4638 | |||
AWS | Recommended Practices for Stud Welding | 1 | 671.52 A511 No. C5.4-93 | |||
AWS | Recommended Safe Practice for Electron Beam Weldin | 1 | 671.52 A511 No. F2.1-78 | |||
ANSI/ASME | Factory-Made Wrought Steel Buttwelding Fittings | 1993 | ANSI/ASME B16.9 | |||
ISO | Plastics – Determination of Water Content | 2008 | ANSI/ISO 15512:2008 (E) | |||
ANSI | Product Safety Signs and Labels | 1998 | ANSI Z535.4 | |||
ANSI/AWWA | Protective Interior Coatings for Valves and Hydran | 1 | 2005 | ANSI/AWWA C550 – 2005 | ||
ANSI/ASME | Addenda to ANSI/ASME SPPE-1-1998 Quality Assurance | 1 | SPPE-1a-1b-1c-1d | |||
ANSI | Wire and Rope for Mines | ANSI M11.1 | ||||
ANSI | For Ladders - Portable Wood - Safety Requirements | ANSI A14.1 |