The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Control Valve Seat Leakage | 1976 | ANSI B16.104 | |||
AWS | Recommended Practices for the Brazing of Copper Pi | 1 | 1995 | 671.51 A511 No. D10.13-95 | ||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 1997 | 671.52 A511 No. D8.9-97 | ||
ANSI/ISO | Amendment 1—General Purpose Flat Pallets for Throu | 1994 | ANSI/ISO 6780 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1989 | ANSI/ASME B31.8 | |||
ANSI/ASHRAE/ACCA | Peak Cooling and Heating Load Calculations in Buil | 1 | 2007 | ANSI/ASHRAE/ACCA 183 – 2007 | ||
ANSI/ASME | Standard for the Qualification of Elevator Inspect | 1 | 2010 | ANSI/ASME QEI-1-2010 | ||
AWS | Specification for Zirconium and Zirconium Alloy Ba | 1 | 671.52 A511 No. A5.24-79 | |||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 671.51 A511 No. A5.7-84 | |||
ANSI/ASME | Safety Code for Elevators and Escalators | ANSI/ASME A17.1 | ||||
ANSI | Basic Criteria for Indexes (R1974) | ANSI Z39.4 | ||||
ANSI/SAE/AS | Packing, Preformed-O-Ring Seal | 2006 | ANSI/SAE/AS 3582 (R2006) | |||
ANSI/SAE/AMS | Carburizing and Heat Treatment of Carburizing Grad | ANSI/SAE/AMS 2759/7A | ||||
AWS | Specification for Aluminum Brazing | 1 | 671.52 A511 No. C3.7-99 | |||
AWS | Guide to Weld Discoloration Levels on Inside of Au | 1 | 671.52 A511 No. D18.2-99 | |||
ANSI/BHMA | Door Controls – Closers | ANSI/BHMA A156.4 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1992 Power Piping | ANSI/ASME B31.1c | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-208-96 | ||
AWS | Specification for Low Alloy Steel Covered Arc Weld | 1 | 1981 | 671.51 A511 No. A5.5-81 | ||
ANSI | Specifications for Dry Cells and Batteries | ANSI C18.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1991 Side Boom Tract | 1995 | ANSI/ASME B30.14c | |||
ANSI/ASME | Face-to-Face and End-to-End Dimensions of Valves | ANSI/ASME B16.10 – 2000 | ||||
ANSI/ASME | Safety Requirements for Window Cleaning | 1991 | ANSI/ASME A39.1 | |||
NEMA | Motors and Generators | NEMA MG1-2010 | ||||
ANSI/SAE/AS | Aerospace Basic Quality System | ANSI/SAE/AS 9000 | ||||
ANSI | For Plastic Shower Receptors and Shower Stalls | 1987 | ANSI Z124.2 | |||
ANSI | For Materials Handling - Unit Loads and Transport | 1993 | ANSI MH10.8M | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-001-90 | |||
AWS | Uniform Designation System of Oxyfuel Nozzles | 1 | 2000 | 671.52 A511 No. C4.5M-2000 | ||
ANSI/ISO | Environmental Management – Environmental Performan | 2 | 1999 | ANSI/ISO 14031 | ||
ANSI/IEEE | IEEE Standard Reference Designations for Electrica | 1975 | ANSI/IEEE 200 | |||
ANSI/ASME | Hook-Type Forks and Fork Carriers for Powered Indu | 1988 | ANSI/ASME B56.11.4 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1987 Chemical Plant a | 1988 | ANSI/ASME B31.3a | |||
AWS | Specification for Corrosion Resisting Chromium and | 1 | 671.52 A511 No. A5.9-81 | |||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 671.51 A511 No. D10.8-96 | |||
ANSI/ASME | Factory-Made Wrought Steel Buttwelding Fittings | ANSI/ASME B16.9 | ||||
ANSI | Product Safety Signs and Labels | ANSI Z535.4 | ||||
ANSI | Safety Requirements for Floor and Wall Opening,, | 1973 | ANSI A12.1 | |||
ANSI/SAE/AS | Fitting, Tee, Standard and Reducer Bulkhead on Run | ANSI/SAE/AS 1033E | ||||
ANSI/ISO/TR | Information to Assist Forestry Organizations in th | 2 | ANSI/ISO/TR 14061 | |||
AWS | Recommended Practices for Automotive Welding Desig | 1 | 671.52 A511 No. D8.4-61 | |||
STI | Standard for the Inspection of Aboveground Storage | 1 | STI SP001 – 2006 | |||
ANSI/IPC | Acceptability of Electronic Assemblies | ANSI/IPC A-610D | ||||
ANSI/ASME | Quality Assurance and Certification of Safety and | ANSI/ASME SPPE-1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.4 – 1992 Liquid Transport | ANSI/ASME B31.4a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1991 Side Boom Tract | ANSI/ASME B30.14b | ||||
AWS | Specification for Carbon Steel Filler Metals for G | 1 | 1979 | 671.52 A511 No. A5.18-79 | ||
AWS | Standard Methods for Mechanical Testing of Welds | 1 | 1998 | 671.52 A511 No. B4.0-98 | ||
ANSI | Characters Set for Optical Character Recognition ( | ANSI X3.49 | ||||
ANSI | Screw Thread Gaging Systems for Dimensional Accept | ANSI B1.3 |