The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ISO | Quality Management and Quality Assurance Standards | ANSI/ISO 9000-3 | ||||
ISO | Carbon Steel, Sheet, Strip and Plate | ANSI/SAE/AMS 2046B | ||||
ANSI/ASQC | Generic Guidelines for Quality Systems | ANSI/ASQC Z1.15 | ||||
AWS | Specification for Carbon Steel Electrodes and Flux | 1 | 1989 | 671.52 A511 No. A5.17-89 | ||
ANSI/ASME | Liquid Petroleum Transportation Piping Systems | ANSI/ASME B31.4 | ||||
AWS | Specification for the Qualification of Welding Eng | 1 | 2001 | 671.52 A511 No. B5.16-2001 | ||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1985 Side Boom Tract | ANSI/ASME B30.14a | ||||
ANSI | Addenda to ANS Z21.10.3 - 1987 for Gas Water Heate | 1988 | ANSI Z21.10.3a | |||
ANSI | Gas Water Heaters - Volume III | 1987 | ANSI Z21.10.3 | |||
ANSI | Overhead and Gantry Cranes | 1976 | ANSI B30.2.0 | |||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | ANSI/ASME A17.3 | ||||
ANSI | Gas-Fired Construction Heaters | ANSI Z83.7 | ||||
ANSI | Identification of Air-Purifying Respirator Caniste | ANSI K13.1 | ||||
ANSI | Safety Requirements for Floor and Wall Opening,, | ANSI A12.1 | ||||
API | Evaporative Loss from Low-Pressure Tanks | 1 | 665.5028 A51 No. 2516 | R1993 | ||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1990 | ANSI/ASME B30.2 | |||
ANSI/ARI | Standard for Water Source Heat Pumps | 1986 | ANSI/ARI 320 | |||
AWS | Recommended Practices for Electron Beam Welding | 1 | 671.52 A511 No. C7.1-92 | |||
AWS | Guide for the Training and Qualification of Weldin | 1 | 671.52 A511 No. EG2.0-95 | |||
ANSI/ISO | Amendment 1—General Purpose Flat Pallets for Throu | 1994 | ANSI/ISO 6780 | |||
ISO | End-Suction Centrifugal Pumps (Rating 16 Bar) – De | 1975 | ANSI/ISO 2858:1975 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1989 | ANSI/ASME B31.8 | |||
ANSI/MSS | Specification for High-Test, Wrought, Butt-Welding | 1 | 2008 | ANSI/MSS SP-75-2008 | ||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 1 | 2010 | ANSI/ASCE 7 | ||
ANSI/SAE/AS | Fitting End, Bulkhead Flareless, Design Standard | ANSI/SAE/AS 4377C | ||||
API | Review of Air Toxics Emission Calculations from St | 1 | 1992 | 665.5028 A51 No. 2525 | ||
ANSI/ISO/ASQC | Quality Management – Guidelines for Configuration | ANSI/ISO/ASQC Q10007 | ||||
ISO | Specification for Low Alloy Steel Filler Metals fo | 1 | 671.52 A511 No. A5.28-79 | |||
AWS | Recommended Practices for Resistance Welding | 1 | 2000 | 671.51 A511 No. C1.1M/C1.1-2000 | ||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1/D1.1M-2004 | |||
AWS | Method for Sampling Airborne Particulates Generate | 1 | 1992 | 671.52 A511 No. F1.1-92 | ||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
ANSI/IEEE | Supplement to Graphic Symbols for Electrical and E | ANSI/IEEE 315A | ||||
ANSI/ASME | Hook-Type Forks and Fork Carriers for Powered Indu | ANSI/ASME B56.11.4 | ||||
ANSI/ASME | Managing System Integrity of Gas Pipelines | ANSI/ASME B31.8s | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 No. B2.1-1-207-96 | ||
ANSI/ASME | Manual for Determining the Remaining Strength of C | ANSI/ASME B31G | ||||
AWS | Specification for Stainless Steel Electrodes for S | 1 | 1992 | 671.51 A511 No. A5.4-92 | ||
ANSI | For Refuse Collection, Processing and Disposal Equ | 1992 | ANSI Z245.1 | |||
ANSI | Survey Methods for Determination of Sound Power Le | 1979 | ANSI S1.36 | |||
ANSI/ASME | Addenda to ANSI/ASME B16.34 – 1996 Valves – Flange | ANSI/ASME B16.34a | ||||
ANSI/AMS | Fusion Welding for Aerospace Applications | ANSI/AMS 2219 | ||||
ANSI | Gear and Spline Drawing Standards Part 2 – Bevel a | ANSI Y14.7.2 | ||||
ANSI | Roll Forming and Roll Bending Machines-Safety Requ | ANSI B11.12 | ||||
AWS | Specification for Carbon Steel Filler Metals for G | 1 | 671.52 A511 No. A5.18-79 | |||
ANSI/ASME | Side Boom Tractors | 1996 | ANSI/ASME B30.14 | |||
ANSI/ASME | Addenda to ANSI/ASCME A39.1 – 1991 – Safety Requir | 1993 | ANSI/ASME A39.1a | |||
AWS | Specification for Fusion Welding for Aerospace App | 1 | 671.52 A511 No. D17.1-2001 | |||
AWS | Standard for Use of the International System of Un | 1 | 671.52 A511 No. SI10-97 | |||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2 | 1997 | ANSI/ISO 14040 |