The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Specification for Carbon and Low Alloy Steel Elect | 1 | 1991 | 671.52 A511 No. A5.26-91 | ||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
ANSI/ASME | Pipeline Transportation Systems for Liquids and Sl | 1 | 2012 | ANSI/ASME B31.4 | ||
ANSI | Safety Requirements for Confined Places | 1989 | ANSI Z117.1 | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
ANSI | Wire and Rope for Mines | 1980 | ANSI M11.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1995 | ANSI/ASME B31.3c | |||
ANSI/ASME | Monorails and Underhung Cranes | 1998 | ANSI/ASME B30.11 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | 1998 | ANSI/ASME A17.1b | |||
ANSI | Ductile Iron Pipe, Centrifugally Cast, for Gas | 1991 | ANSI A21.52 | |||
AWS | Bridge Welding Code | 1 | 1988 | 671.51 A511 No. D1.5-88 | ||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 2002 | 671.52 A511 No. C2.20/C2.20M-2002 | ||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 671.52 A511 No. A5.10-88 | |||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 671.51 A511 No. D10.8-78 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | ANSI/ASME B30.21a | ||||
ANSI/ISO | Quality Systems – Guidelines for Performance Impro | ANSI/ISO 9004 | ||||
ANSI/AWWA | Coal-Tar Protective Coatings and Linings for Steel | ANSI/AWWA C203 | ||||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 671.52 A511 No. D8.9-97 | |||
ANSI/ISO | Petroleum and Natural Gas Industries-Design and Op | 2002 | ANSI/ISO 13628-8 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | ANSI/ASME B30.2 – 2005 | |||
ANSI/BHMA | Power Operated Pedestrian Doors | 1999 | ANSI/BHMA A156.10 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | ANSI/ASME B16.5a | ||||
ANSI | Accepted Practices for Hydrogen Sulfide Safety Tra | ANSI Z390.1 | ||||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
ANSI/ISO/DIS | Environmental Management – Vocabulary | ANSI/ISO/DIS 14050 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.002-90 | ||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 1983 | 671.52 A511 No. A5.11-83 | ||
ANSI | Procedures for the Use of the Communication Contro | ANSI X3.28 | ||||
ANSI | Tree, Shrub and Other Woody Plant Maintenance - St | ANSI A300 | ||||
AWS | Effects of Welding on Health IX | 1 | 1995 | 671.52 A511 No. EWH9-95 | ||
ANSI/ASME | Process Piping | 1 | 2010 | ANSI/ASME B31.3-2010 | ||
ANSI | Dictionary of Terms for Computer-Aided Preparation | 1975 | ANSI Y14.26.3 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
ANSI | Cast Copper Alloy Solder Joint Pressure Fittings | 1984 | ANSI B16.18 | |||
ANSI/ASME | Below the Hook Lifting Devices | 1999 | ANSI/ASME B30.20 | |||
ANSI/ASME | Metallic Gaskets for Pipe Flanges- Ring-Joint, Sp | 1998 | ANSI/ASME B16.20 | |||
ANSI/AAMA | Voluntary Specifications for Aluminum Combination | 1980 | ANSI/AAMA 1002.10 | |||
ANSI/ASSE | Performance Requirements for Temperature Actuated | 2003 | ANSI/ASSE 1017 – 2003 | |||
AWS | Recommended Practices for Metallizing with Aluminu | 1 | 1967 | 671.51 A511 No. C2.2-67 | ||
AWS | Sampling Strategy Guide for Evaluating Contaminant | 1 | 1991 | 671.52 A511 No. F1.3-91 | ||
ISO | Specification for Carbon and Low Alloy Steel Elect | 1 | 671.52 A511 No. A5.25-91 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1-84 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1996 Process Piping | ANSI/ASME B31.3b | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | ANSI/ASME B30.11c | ||||
ANSI/IEEE | IEEE Recommended Practice for Energy Conservation | ANSI/IEEE 739 |