The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ISO/IEC | General Requirements for the Competence of Testing | 1999 | ANSI/ISO/IEC 17025 | |||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | 1991 | ANSI/IEEE 1154 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1987 Chemical Plant a | ANSI/ASME B31.3b | ||||
ANSI/ASME | Derricks | ANSI/ASME B30.6 | ||||
ANSI/ASME | Valves-Flanged Threaded and Welding End | ANSI/ASME B16.34-2009 | ||||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
ANSI/AWWA | AWWA Standard for Inspecting and Repairing Steel W | ANSI/AWWA D101 | ||||
AWS | Specification for the Qualification of Welding Fab | 1 | 671.52 A511 No. B5.17-2000 | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10/D10.10M-99 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1995 | ANSI/ASME B31.3c | |||
ANSI/ASME | Monorails and Underhung Cranes | 1998 | ANSI/ASME B30.11 | |||
AWS | Specification for Welded Joints in Machinery and E | 1 | 671.52 A511 No. D14.4-97 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | 1998 | ANSI/ASME A17.1b | |||
ANSI | Specifications for Credit Cards | 1971 | ANSI X4.13 | |||
AWS | Recommended Practices for Metallizing with Aluminu | 1 | 1967 | 671.51 A511 No. C2.2-67 | ||
AWS | Effects of Welding on Health VII | 1 | 671.52 A511 No. EWH7-89 | |||
ANSI | Preferred Limits and Fits for Cylindrical Ports (R | 1967 | ANSI B4.1 | |||
AWS | Sampling Strategy Guide for Evaluating Contaminant | 1 | 1991 | 671.52 A511 No. F1.3-91 | ||
ANSI/UL | Panelboards | ANSI/UL 67 | ||||
ANSI/NSF | Drinking Water System Components Health Effects | ANSI/NSF 61 | ||||
ANSI/SAE/AMS | Nickel Alloy, Corrosion and Heat-Resistant, Bars, | ANSI/SAE/AMS 5662M | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 B2.1-1-202-96 | ||
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 2007 | 671.51 A511 No. A5.2/A5.2M-2007 | ||
ANSI | Control Valve Seat Leakage | ANSI B16.104 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
ANSI/SAE | Assembly, Installation and Torque for Flareless an | 1 | 2005 | ANSI/SAE AS 5148 –1998(R2005) | ||
ANSI/ASME | Buttwelding Ends | ANSI/ASME B16.25 | ||||
ANSI/ASME | Process Piping | 1 | 2012 | ANSI/ASME B31.3 | ||
ANSI/ACI | Evaluating the Performance of Post-Installed Mecha | ANSI/ACI 355.2/355.2R | ||||
ANSI/ISO | Quality Management – Guidelines for Configuration | 1995 | ANSI/ISO 10007 | |||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | 1994 | ANSI/AWWA C605 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | ANSI/ASME B31.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | ANSI/ASME B30.20b | ||||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
ANSI/IESNA | Lighting for Exterior Environments | ANSI/IESNA RP-33-99 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-207-96 | |||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA---1a | ||||
AWS | Specification for Stainless Steel Electrodes for S | 1 | 671.51 A511 No. A5.4-92 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
ANSI/ASME | Below the Hook Lifting Devices | 1999 | ANSI/ASME B30.20 | |||
AWS | Recommended Practices for Electrogas Welding | 1 | 671.52 A511 No. C5.7-2000 (R2006) | |||
ANSI/ASME | Metallic Gaskets for Pipe Flanges- Ring-Joint, Sp | 1998 | ANSI/ASME B16.20 | |||
ANSI | Safety Color Code for Marking Physical Hazards | 1979 | ANSI Z53.1 | |||
AWS | Bridge Welding Code | 1 | 1988 | 671.51 A511 No. D1.5-88 | ||
AWS | Standard for Accreditation of Test Facilities for | 1 | 671.52 A511 No. QC4-89 | |||
ANSI/AAMA | Voluntary Specifications for Aluminum Combination | 1980 | ANSI/AAMA 1002.10 | |||
ANSI | Requirements for Salient-Pole Synchronous Generato | 1982 | ANSI C50.12 | |||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 2002 | 671.52 A511 No. C2.20/C2.20M-2002 |