The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.006-90 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1999 Process Piping | 2000 | ANSI/ASME B31.3a | |||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1985 Side Boom Tract | 1987 | ANSI/ASME B30.14b | |||
ANSI/UL | Office Appliances and Business Equipment | ANSI/UL 114 | ||||
ANSI/ASME | Addenda to ASME A17.3 – 1990 Safety Code for Exist | 1991 | ANSI/ASME A17.3a | |||
ANSI/NEMA | Motors and Generators | ANSI/NEMA MG1 | ||||
AWS | Structural Welding Code Steel | 1 | 1992 | 671.51 A511 No. D1.1-92 | ||
AWS | Specification for Induction Brazing | 1 | 1999 | 671.52 A511 No. C3.5-99 | ||
AWS | Sheet Metal Welding Code | 1 | 671.52 A511 No. D9.1M/D9.1-2006 | |||
ANSI/ASHRAE/ACCA | Peak Cooling and Heating Load Calculations in Buil | 1 | ANSI/ASHRAE/ACCA 183 – 2007 | |||
AWS | Filler Metal Procurement Guidelines | 1 | 671.51 A511 No. A5.01-93 | |||
AWS | Recommended Practices for Resistance Welding | 1 | 671.51 A511 No. C1.1M/C1.1-2000 | |||
ANSI | For Library and Information Services and Related P | 1983 | ANSI Z39.46 | |||
ANSI | National Electrical Safety Code | 1993 | ANSI C2 | |||
ANSI | Methods for the Measurement and Designation of Noi | ANSI S12.10 | ||||
ANSI | Exit Devices | ANSI A156.3 | ||||
ANSI/ASME | Pipeline Transportation Systems for Liquid Hydroca | ANSI/ASME B31.4 | ||||
AWS | Specification for Stainless Steel Electrodes for F | 1 | 1995 | 671.52 A511 No. A5.22-95 | ||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14 | ||||
AWS | Specification for Bare Stainless Steel Welding Ele | 1 | 1993 | 671.52 A511 No. A5.9-93 | ||
ANSI/ISO | Stationary Source Emissions – Manual Determination | 2003 | ANSI/ISO 9096 | |||
ANSI/ASME | Factory-Made Wrought Buttwelding Fittings | 2007 | ANSI/ASME B16.9-2007 | |||
ANSI/AWWA | Steel Pipe Flanges for Water Works Service-Sizes 4 | 1994 | ANSI/AWWA C207 | |||
AWS | Filler Metal Comparison Charts | 1 | 1993 | 671.52 A511 No. FMC-93 | ||
ANSI/ASME | Safety Code for Existing Elevators and Escalators | 1 | 2011 | ANSI/ASME A17.3-2011 | ||
ANSI/UL | Test for Flame – Propagation of Fabrics and Films | 1997 | ANSI/UL 214 | |||
ANSI/IEEE | IEEE Guide to Software Requirements Specifications | ANSI/IEEE 830 | ||||
ANSI/NACE | Materials Resistant to Sulfide Stress Cracking in | 2 | 2003 | ANSI/NACE MR0103 | ||
ANSI/ASME | Quality Assurance Program Requirements for Nuclear | ANSI/ASME N45.2 | ||||
ANSI/ASME | Gages and Gaging for Unified Inch Screw Threads (R | ANSI/ASME B1.2 | ||||
ANSI | For Plastic Lavatories | ANSI Z124.3 | ||||
AWS | Filler Metal Comparison Charts | 1 | 671.52 A511 No. A5.0-83 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1999 | ANSI/ASME B31.8 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.21 – 1994 Manually Lever | 1997 | ANSI/ASME B30.21b | |||
ANSI/ASME | Wrought Steel Buttwelding Short Radius Elbows and | 1994 | ANSI/ASME B16.28 | |||
ANSI/SAE/AS | Nut, Fitting, Port | ANSI/SAE/AS 5179A | ||||
ANSI/AGMA | Gear Classification and Inspection Handbook | ANSI/AGMA 2000 - A88 | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2 | ANSI/ISO 14040 | |||
AWS | Guide for the Protection of Steel with Thermal Spr | 1 | 1993 | 671.51 A511 No. C2.18-93 | ||
AWS | Guide for Aluminum Hull Welding | 1 | 1983 | 671.52 A511 No. D3.7-83 | ||
AWS | Recommended Practices for Air Carbon Arc Gouging a | 1 | 671.52 A511 No. C5.3-91 | |||
AWS | Specification for Use and Performance of Transpare | 1 | 671.52 A511 No. F2.3M-2001 | |||
AWS | Specification for Nickel-Alloy Electrodes for Flux | 1 | 671.52 A511 No. A5.34/A5.34M-2007 | |||
AWS | Structural Welding Code Aluminum | 1 | 671.51 A511 No. D1.2-83 | |||
ANSI | For Information Technology - Programming Language | 1995 | ANSI X3.37 | |||
ANSI | Safety Requirements for Workplace Floor and Wall O | 1989 | ANSI A1264.1 | |||
ANSI | Involute Splines and Inspection | ANSI B92.1 | ||||
ANSI/ASME | Elevator and Escalator Electrical Equipment | A17.5 – 2004 | ||||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
AWS | Specification for Consumables Used for Electroslag | 1 | 1978 | 671.52 A511 No. A5.25-78 |