The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | ANSI/ASME B30.20b | ||||
ANSI/AMS | Sand Magnesium Alloy Castings | ANSI/AMS 4420M | ||||
ANSI/UL | High-Efficiency, Particulate, Air Filter Unit | 1985 | ANSI/UL 586 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1992 Gas Transmission | 1993 | ANSI/ASME B31.8a | |||
ANSI/ASME | Below the Hook Lifting Devices | 1999 | ANSI/ASME B30.20 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.002-90 | ||
AWS | Specification for Nickel and Nickel Alloy Covered | 1 | 1983 | 671.52 A511 No. A5.11-83 | ||
ANSI/AWWA | AWWA Standard for Inspecting and Repairing Steel W | ANSI/AWWA D101 | ||||
ANSI/UL | Panelboards | ANSI/UL 67 | ||||
ANSI/NSF | Drinking Water System Components Health Effects | ANSI/NSF 61 | ||||
AWS | Recommended Practices for Ultrasonic Inspection of | 1 | 671.52 A511 no. C3.8-90 | |||
AWS | Guide for the Evaluation of Hot Gas, Hot Gas Extru | 1 | 671.52 A511 No. G1.10M-2001 | |||
ANSI/ASME | Large Diameter Steel Flanges NPS 26 Through NPS 60 | 1 | 2006 | ANSI/ASME B16.47 | ||
ANSI/ASME | Slings | 1 | 2010 | ANSI/ASME B30.9-2010 | ||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.52 A511 No. A4.2-91 | |||
AWS | Specification for Consumable Inserts | 1 | 671.52 A511 No. A5.30/A5.30M-2007 | |||
AWS | Bridge Welding Code | 1 | 671.51 A511 No. D1.5-96 | |||
ANSI/ASME | Addenda to ANSI/ASCME A39.1 – 1991 – Safety Requir | ANSI/ASME A39.1a | ||||
ANSI | For Safety Glazing Materials Used in Buildings – S | ANSI Z97.1 | ||||
ANSI/ISO/IEC | General Requirements for the Competence of Testing | 1999 | ANSI/ISO/IEC 17025 | |||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | 1991 | ANSI/IEEE 1154 | |||
ANSI | For Safe Use of Lasers in Health Care Facilities | 2005 | ANSI Z136.3 | |||
ANSI | Protective Coatings (Paints) for the Nuclear Indus | 1974 | ANSI N512 | |||
AWS | Process Specification for Electron Beam Welding | 1 | 1999 | 671.52 A511 No. C7.3-99 | ||
AWS | Recommended Safe Practices for the Preparation for | 1 | 1999 | 671.52 A511 No. F4.1-99 | ||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.14 – 1991 Side Boom Tract | 1993 | ANSI/ASME B30.14a | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1987 Chemical Plant a | ANSI/ASME B31.3b | ||||
ANSI/ASME | Elevator and Escalator Electrical Equipment | 1996 | ANSI/ASME A17.5 | |||
ANSI/ASME | Derricks | ANSI/ASME B30.6 | ||||
ANSI/SAE | Airspeed Tubes Electrically Heated | 1 | ANSI/SAE AS 393B-2008 | |||
ANSI/SAE/AS | Quality Systems – Aerospace – Model for Quality As | 2001 | ANSI/SAE/AS 9100A | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1995 | ANSI/ASME B31.3c | |||
AWS | Specification for Carbon and Low Alloy Steel Elect | 1 | 1991 | 671.52 A511 No. A5.26-91 | ||
ANSI/IESNA | Lighting for Exterior Environments | ANSI/IESNA RP-33-99 | ||||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | ANSI/ASME NQA---1a | ||||
ISO | Fitting, Bushing, Port, Reducer | ANSI/SAE/AS 5173B | ||||
ANSI/ISO | Environmental Management - Vocabulary | ANSI/ISO 14050 | ||||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 671.52 A511 No. D8.9-97 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | ANSI/ASME B30.2 – 2005 | |||
ANSI/ASHRAE | Method of Testing the Performance of Cool Storage | 2000 | ANSI/ASHRAE 150-2000 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
AWS | Specification for Tungsten and Tungsten-Alloy Elec | 1 | 671.52 A511 No. A5.12/A5.12M-98 | |||
AWS | Recommended Safe Practices for Thermal Spraying | 1 | 671.51 A511 No. C2.1-73 | |||
ANSI/ARI | Standard for Water Source Heat Pumps | ANSI/ARI 320 | ||||
ANSI/ISO | Quality Management – Guidelines for Configuration | 1995 | ANSI/ISO 10007 | |||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | 1994 | ANSI/AWWA C605 | |||
ANSI | Acceptance Testing Specifications for Electrical P | ATS-2007 |