The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort ascending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASQC | Specification of General Requirements for a Qualit | ANSI/ASQC C1 | ||||
AWS | Uniform Designation System of Oxyfuel Nozzles | 1 | 671.52 A511 No. C4.5M-2000 | |||
ANSI/SAE/AMS | Core, Flexible Honeycomb, Polyamide Paper Base, Ph | ANSI/SAE/AMS 3713D | ||||
AWS | Guide for the Joining of Wrought Nickel-Based Allo | 1 | 671.52 A511 No. G2.1M/G2.1-2002 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | ANSI/ASME B31.5b | ||||
ANSI/ASME | Overhead Hoists (Underhung) | ANSI/ASME B30.16 | ||||
AWS | Specification for Consumable Inserts | 1 | 671.52 A511 No. A5.30-97 | |||
AWS | Structural Welding Code Reinforcing Steel | 1 | 671.51 A511 No. D1.4-98 | |||
ANSI | Rigid Steel Conduit - Zinc Coated | ANSI C80.1 | ||||
AWS | Specification for Titanium and Titanium Alloy Bare | 1 | 671.52 A511 No. A5.16-70 | |||
ANSI | Construction and Demolition Operations – Scaffoldi | ANSI A10.8 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1987 Overhead Hoists | 1989 | ANSI/ASME B30.16a | |||
ANSI/ASME | Gages and Gaging for Unified Inch Screw Threads (R | 1983 | ANSI/ASME B1.2 | |||
ANSI/ASME | Quality Assurance Requirements for Nuclear Facilit | 2002 | ANSI/ASME NQA---1a | |||
ANSI/ASME | Liquid Petroleum Transportation Piping Systems | 1979 | ANSI/ASME B31.4 | |||
ANSI | For the Safe Use of Lasers in Health Care Faciliti | 1988 | ANSI Z136.3 | |||
ANSI | Housekeeping During the Construction Phase of Nucl | 1973 | ANSI N45.2.3 | |||
ANSI/ASME | Guide for Inspection of Elevators, Escalators, and | 1 | 2012 | ANSI/ASME A17.2 | ||
ANSI/ASME | Manual for Determining the Remaining Strength of C | 1 | 2012 | ANSI/ASME B31G | ||
API | Metals Criteria for Land Management of Exploration | 1 | 1995 | 665.5028 A51 No. 4600 | ||
ISO | Specification for Low Alloy Steel Filler Metals fo | 1 | 1979 | 671.52 A511 No. A5.28-79 | ||
ANSI/NACE | Petroleum and Natural Gas Industries - Materials f | 1 | ANSI/NACE MR0175/ISO 15156-1-2-3 2009/2011 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | ANSI/ASCE 7 | ||||
ANSI/SAE/AS | Aerospace First Article Inspection Requirement | 2000 | ANSI/SAE/AS 9102 | |||
ANSI | Reference Designations for Electrical and Electron | ANSI Y32.16 | ||||
AWS | Structural Welding Code Reinforcing Steel | 1 | 1998 | 671.51 A511 No. D1.4-98 | ||
AWS | Recommended Practices for Automotive Portable Gun | 1 | 1966 | 671.52 A511 No. D8.5-66 | ||
ANSI/ISO | Guidelines for Developing Quality Manuals | 1995 | ANSI/ISO 10013 | |||
ANSI/BHMA | Door Controls – Closers | 1986 | ANSI/BHMA A156.4 | |||
ANSI/SAE/AMS | Hard Anodic Coating of Magnesium Alloys Alkaline T | ANSI/SAE/AMS 2466A | ||||
ANSI/ISO | Quality Assurance for Measuring Equipment – Part 2 | 2 | ANSI/ISO 10012-2 | |||
ANSI/BHMA | Power Assist and Low Energy Power Operated Doors | ANSI/BHMA A156.19 | ||||
ANSI | Construction and Demolition Operations – Scaffoldi | 1988 | ANSI A10.8 | |||
ANSI/ASME | Surface Texture (Surface Roughness, Waviness, and | ANSI/ASME B46.1 | ||||
AWS | Specification for Automotive Frame Weld Quality - | 1 | 671.52 A511 No. D8.8-79 | |||
ANSI/ASME | Controls and Safety Devices for Automatically Fire | 1 | ANSI/ASME CSD-1-2009 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | ANSI/ASME B31.1b | ||||
CEI/IEC | Rotating Electrical Machines – Part 1: Rating and | CEI/IEC 60034-1:2004 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | ANSI/ASME B30.2b | ||||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.51 A511 No. A4.2M/A4.2-97 | |||
AWS | Recommended Practices for Resistance Welding Coate | 1 | 671.51 A511 No. C1.3-70 | |||
ANSI | For Financial Services - Financial Transaction Car | ANSI X4.16 | ||||
API | Shop Testing of Automatic Liquid Leval Gages | 1 | 665.5028 A51 No. 2509B | R1997 | ||
ANSI | Machine Tools - Mechanical Power Presses – Safety | ANSI B11.1 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and G | 1993 | ANSI/ASME B30.2c | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 1993 | ANSI/ASCE 7 | |||
ANSI/ASME | Managing System Integrity of Gas Pipelines | 2001 | ANSI/ASME B31.8s | |||
ANSI/ASME | Manual for Determining the Remaining Strength of C | 1991 | ANSI/ASME B31G | |||
ANSI | Graphic Symbols for Grid and Mapping Diagrams Used | 1976 | ANSI Y32.21 | |||
ANSI | Socket Cap, Shoulder and Set Screws - Inch Series | 1976 | ANSI B18.3 |