The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
AWS | Specification for the Qualification of Welding Fab | 1 | 671.52 A511 No. B5.17-2000 | |||
AWS | Recommended Practices for Local Heating of Welds i | 1 | 671.51 A511 No. D10.10/D10.10M-99 | |||
ANSI/ASME | Pipeline Transportation Systems for Liquids and Sl | 1 | 2012 | ANSI/ASME B31.4 | ||
ANSI/ISO | Environmental Labels and Declarations – Self-Decla | 1999 | ANSI/ISO 14021 | |||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 1978 | 671.52 A511 No. C4.2-78 | ||
ANSI/IEEE | IEEE Standard Requirements, Terminology, and Test | 1972 | ANSI/IEEE 32 | |||
ANSI/ASME | Safety Standard for Operator Controlled Industria | 1992 | ANSI/ASME B56.9 | |||
ANSI/ASME | Interpretations – ASME B31.1 No. 14 Cases No. 9, | ANSI/ASME B31.1 | ||||
ANSI | Construction and Demolition Operations – Safety an | 1992 | ANSI A10.33 | |||
ANSI | For Safety Glazing Materials for Glazing Motor Veh | 1983 | ANSI Z26.1 | |||
ANSI | Relief Valves and Automatic Gas Shutoff Devices fo | 1986 | ANSI Z21.22 | |||
ANSI | Involute Splines and Inspection | 1970 | ANSI B92.1 | |||
AWS | Specification for Welding Electrodes and Rods for | 1 | 1990 | 671.52 A511 No. A5.15-90 | ||
AWS | Standard Methods for Mechanical Testing of Welds | 1 | 2000 | 671.52 A511 No. B4.0M-2000 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | ANSI/ASME B31.8c | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | ANSI/ASME B30.20a | ||||
ANSI/TIA/EIA | Structural Standards for Steel Antenna Towers & An | ANSI/TIA/EIA 222-F | ||||
ANSI/ISO/TS | Quality Systems – Automotive Suppliers – Particula | ANSI/ISO/TS 16949 | ||||
AWS | Guide for the Fusion Welding of Titanium and Titan | 1 | 671.52 A511 No. G2.4/G2.4M-2007 | |||
ANSI/ASME | Steel Stacks | 1 | ANSI/ASME STS – 1 – 2006 | |||
ANSI/ASME | Pipe Flanges and Flanged Fittings | ANSI/ASME B16.5 | ||||
ANSI/UL | Office Appliances and Business Equipment | 1982 | ANSI/UL 114 | |||
ANSI/ISO | Radiographic Image Quality Indicators for Non-Dest | ANSI/ISO 1027 | ||||
ANSI | Safety Requirements for Personal Fall Arrest Syste | 2 | ANSI Z359.1 | |||
ANSI/NEMA | Motors and Generators | 1978 | ANSI/NEMA MG1 | |||
ANSI/ASQC | Specification of General Requirements for a Qualit | ANSI/ASQC C1 | ||||
ANSI | Programming Language FORTRAN | ANSI X3.9 | ||||
ANSI | Recommended Specifications for Standard Steel Door | ANSI A250.8 | ||||
ANSI/ASME | Large Diameter Steel Flanges | 1990 | ANSI/ASME B16.47 | |||
ANSI/AMS | Rods, Sheets, and Molded Shapes, Polychlorotrifluo | ANSI/AMS 3650 Rev C | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-208-96 | |||
AWS | Specification for Low Alloy Steel Covered Arc Weld | 1 | 671.51 A511 No. A5.5-81 | |||
AWS | Effects of Welding on Health VII | 1 | 1989 | 671.52 A511 No. EWH7-89 | ||
ANSI/ASME | Pipeline Transportation Systems for Liquid Hydroca | 1 | 2009 | ANSI/ASME B31.4-2009 | ||
ANSI/NACE | Sulfide Stress Cracking Resistant Metallic Materia | 2000 | ANSI/NACE MR0175 | |||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 1978 | 671.51 A511 No. D10.8-78 | ||
ANSI/ISO | Non-Destructive Testing-Radiographic Examination o | 1998 | ANSI/ISO 5579 | |||
AWS | Specification for Automotive Weld Quality - Resist | 1 | 1978 | 671.52 A511 No. D8.7-78 | ||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Fin | 1994 | ANSI/ASQC Q9003 | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1982 | ANSI/ASME B31.8 | |||
ANSI/SAE/AMS | Core, Flexible Honeycomb, Polyamide Paper Base, Ph | ANSI/SAE/AMS 3713D | ||||
ANSI | Accepted Practices for Hydrogen Sulfide Safety Tra | 1995 | ANSI Z390.1 | |||
ANSI | Methods for the Measurement and Designation of Noi | 1985 | ANSI S12.10 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 B2.1-1-203-96 | ||
AWS | Specification for Aluminum and Aluminum Alloy Elec | 1 | 1988 | 671.51 A511 No. A5.3-88 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1987 Chemical Plant a | ANSI/ASME B31.3a | ||||
ANSI/ASME | Mobile and Locomotive Cranes | ANSI/ASME B30.5 | ||||
ANSI/SAE/AMS | Plating, Chromium Hard Deposit | 2 | ANSI/SAE/AMS 2406K | |||
ANSI/ISO | Guidelines for Developing Quality Manuals | ANSI/ISO 10013 | ||||
AWS | Specification for Titanium and Titanium Alloy Bare | 1 | 671.52 A511 No. A5.16-70 |