The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Specifications for Door and Frame Preparation for | ANSI A115.1 | ||||
ISO | Specification for Bare Electrodes and Rods for Sur | 1 | 2001 | 671.52 A511 No. A5.21-2001 | ||
AWS | Specification for Corrosion Resisting Chromium and | 1 | 1981 | 671.52 A511 No. A5.9-81 | ||
AWS | Recommended Practices for the Brazing of Copper Tu | 1 | 2001 | 671.51 A511 No. D10.13/D10.13M-2001 | ||
ANSI | Reference Designations for Electrical and Electron | 1975 | ANSI Y32.16 | |||
AWS | Specification for Automotive Weld Quality - Resist | 1 | 2007 | 671.52 A511 No. D8.1M-2007 | ||
ANSI | Square and Hex Bolts and Screws – Inch Series | 1992 | ANSI B18.2.1 | |||
ANSI/UL | Factory-Made Air Ducts and Connectors | 1984 | ANSI/UL 181 | |||
ANSI/NCSL | U.S. Guide to the Expression of Uncertainty in Mea | 1997 | ANSI/NCSL Z540-2 | |||
ANSI/ASHRAE | Safety Standard for Refrigeration Systems | 1 | 2007 | ANSI/ASHRAE 15 - 2007 | ||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 2 | 2010 | ANSI/ASME B31.8-2010 | ||
ANSI/IEEE | IEEE Standard Requirements, Terminology, and Test | ANSI/IEEE 32 | ||||
ANSI/ISO | Quality Management and Quality Assurance Standards | 1994 | ANSI/ISO 9000-1 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.6 – 1987 Safety Standard | ANSI/ASME B56.6c | ||||
ANSI/ASQC | Sampling Procedures and Tables for Inspection By A | 1993 | ANSI/ASQC Z1.4 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-210-96 | |||
AWS | Specification for Copper and Copper Alloy Covered | 1 | 671.51 A511 No. A5.6-76 | |||
ANSI/ASME | Factory-Made Wrought Steel Buttwelding Fittings | 1993 | ANSI/ASME B16.9 | |||
ANSI | Product Safety Signs and Labels | 1998 | ANSI Z535.4 | |||
ISO | Plastics – Determination of Water Content | 2008 | ANSI/ISO 15512:2008 (E) | |||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | ANSI/ASME B31.1a | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and Ga | ANSI/ASME B30.2a | ||||
CAN/CSA | Commentary on North American Specification for the | CAN/CSA S136 | ||||
ANSI/NSPI | Standard for Public Swimming Pools | ANSI/NSPI 1 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Des | 1994 | ANSI/ASQC Q9001 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1992 Refrigeration Pi | 1994 | ANSI/ASME B31.5a | |||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 671.52 A511 No. C4.2-78 | |||
AWS | Specification for Resistance Welding for Aerospace | 1 | 671.52 A511 No. D17.2/D17.2M-2007 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | ANSI/ASCE 7 | |||
ANSI | Graphic Symbols for Logic Diagrams | ANSI Y32.14 | ||||
ANSI | Thread Forming and Thread Cutting Tapping Screws a | ANSI B18.6.4 | ||||
ISO | Mechanical Vibration – Measurement and Evaluation | ANSI/ISO 5349-1-2001 | ||||
ISO | Specification for Zirconium and Zirconium Alloy We | 1 | 1990 | 671.52 A511 No. A5.24-90 | ||
AWS | Specification for Copper and Copper Alloy Bare Wel | 1 | 2007 | 671.51 A511 No. A5.7/A5.7M-2007 | ||
ANSI | For Arboricultural Operations - Pruning, Repairing | 2000 | ANSI Z133.1 | |||
AWS | Recommended Practices for Plasma-Arc Welding | 1 | 1973 | 671.52 A511 No. C5.1-73 | ||
ANSI | Specifications for Underhung Cranes and Monorail S | 1981 | ANSI MH27.1 | |||
AWS | Minimum Requirements for Training of Welders | 1 | 1975 | 671.52 A511 No. E3.1-75 | ||
ANSI/ASME | Side Boom Tractors | ANSI/ASME B30.14-2010 | ||||
ANSI/SAE/AS | Fitting, Tee, Internal Straight Thread Port | ANSI/SAE/AS 5192B | ||||
ANSI/ISO | Non-Destructive Testing-Industrial Radiographic Il | ANSI/ISO 5580 | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2000 | ANSI/ISO 14042 | |||
ANSI/ASME | Line Blanks | 1 | 2010 | ANSI/ASME B16.48 | ||
ANSI/ASQC | Quality Management and Quality Assurance Standards | ANSI/ASQC Q9000-1 | ||||
ANSI/IEEE | Graphic Symbols for Electrical and Electronics Dia | 1975 | ANSI/IEEE 315 | |||
AWS | Specification for Stainless Steel Electrodes for F | 1 | 671.52 A511 No. A5.22-95 | |||
AWS | Specification for the Qualification of Welding Ins | 1 | 671.52 A511 No. B5.2-2001 | |||
AWS | Recommended Practices and Procedures for Welding L | 1 | 671.51 A511 No. D10.12-89 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | 1989 | ANSI/ASME B30.11a | |||
ANSI/ASME | Addenda to ANSI/ASCME A17.1 – 1993 Safety Code for | 1995 | ANSI/ASME A17.1b |