The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Test Procedure and Acceptance Criteria for Physica | 1980 | ANSI A151.1 | |||
ANSI/SAE/AMS | Steel Bars, Forgings, and Tubing 0.15-0.20C (SAE 1 | ANSI/SAE/AMS 2069F | ||||
ANSI/ASHRAE | Safety Code for Mechanical Refrigeration | ANSI/ASHRAE 15 | ||||
ANSI | For Sanitation--Nonsewered Waste Disposal Systems | ANSI Z4.3 | ||||
ANSI | Safety Requirements for Confined Places | 1989 | ANSI Z117.1 | |||
ANSI/ASME | Addenda to ANSI/ASME CSD-1-1995 Controls and Safet | 1996 | ANSI/ASME CSD-1a | |||
ANSI | Wire and Rope for Mines | 1980 | ANSI M11.1 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.3 – 1993 Chemical Plant a | 1995 | ANSI/ASME B31.3c | |||
ANSI/ASME | Monorails and Underhung Cranes | 1998 | ANSI/ASME B30.11 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 1996 Safety Code for | 1998 | ANSI/ASME A17.1b | |||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 1974 | 671.52 A511 No. A4.2-74 | ||
AWS | Specification for Welding Shielding Gases | 1 | 1997 | 671.52 A511 No. A5.32/A5.32M-97 | ||
ISO | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.012-91 | |||
AWS | Guide for the Gas Shielded Arc Welding of Aluminum | 1 | 2000 | 671.51 A511 No. D10.7M/D10.7-2000 | ||
AWS | Specification for Underwater Welding | 1 | 1993 | 671.52 A511 No. D3.6-93 | ||
ANSI | For Office Machines and Supplies – Alphanumeric Ma | ANSI X4.22 | ||||
ANSI/ISO | Quality Management Systems – Guidelines for Qualit | 2 | 2003 | ANSI/ISO 10006 | ||
ANSI | For Machine Tools - Power Press Brakes - Safety | ANSI B11.3 | ||||
ANSI/AWWA | Installation of Ductile Iron Water Mains and their | 1999 | ANSI/AWWA C600 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1982 Gas Transmission | ANSI/ASME B31.8c | ||||
AWS | Structural Welding Code - Sheet Steel | 1 | 1998 | 671.52 A511 No. D1.3-98 | ||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | ANSI/ASME B30.20a | ||||
ANSI/ASHRAE | Designation and Safety Classification of Refrigera | 1 | 2010 | ANSI/ASHRAE 34-2010 | ||
AWS | Guide for the Fusion Welding of Titanium and Titan | 1 | 671.52 A511 No. G2.4/G2.4M-2007 | |||
ANSI/ASME | Steel Stacks | 1 | ANSI/ASME STS – 1 – 2006 | |||
ANSI/ISO | Radiographic Image Quality Indicators for Non-Dest | ANSI/ISO 1027 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-027-95 | |||
ANSI/ASQC | Specification of General Requirements for a Qualit | ANSI/ASQC C1 | ||||
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 671.51 A511 No. A5.2-88 | |||
ANSI/UL | Office Appliances and Business Equipment | 1982 | ANSI/UL 114 | |||
ANSI/NEMA | Motors and Generators | 1978 | ANSI/NEMA MG1 | |||
ANSI/ASME | Addenda to ANSI/ASME A17.1 – 2007 Safety Code for | 2008 | ANSI/ASME A17.1a – 2008 | |||
ANSI/SAE/AS | Fitting, Cross, Standard and Reducer Flared | ANSI/SAE/AS 1036G | ||||
ANSI/ISO/DIS | Environmental Management – Life Cycle Assessment – | ANSI/ISO/DIS 14041 | ||||
ANSI/ASME | Gages and Gaging for Metric M Screw Threads (R2001 | ANSI/ASME B1.16M | ||||
ANSI | For The Safe Use of Lasers | ANSI Z136.1 | ||||
ANSI | Digital Representation for Communication of Produc | 1981 | ANSI Y14.26M | |||
ANSI/ASME | Gas Transmission and Distribution Piping Systems | 1992 | ANSI/ASME B31.8 | |||
ANSI | Forged Steel Fittings, Socket-Welding and Threaded | 1980 | ANSI B16.11 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | 1996 | ANSI/ASME B30.20b | |||
ANSI/ASME | Cast Bronze Threaded Fittings(R1994) | 1985 | ANSI/ASME B16.15 | |||
ANSI/AAMA | Voluntary Specifications for Aluminum Prime Window | 1977 | ANSI/AAMA 302.9 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1991 | 671.52 A511 No. B2.1.011-91 | ||
AWS | Filler Metal Procurement Guidelines | 1 | 1993 | 671.51 A511 No. A5.01-93 | ||
AWS | Standard Procedures for Determination of Moisture | 1 | 671.52 A511 No. A4.4M-2001 | |||
AWS | Recommended Practices for Laser Beam Welding, Cutt | 1 | 1998 | 671.52 A511 No. C7.2-98 | ||
AWS | Method for Sount Level Measurement of Manual Arc W | 1 | 1978 | 671.52 A511 No. F6.1-78 | ||
ANSI/ISO/DIS | Environmental Management – Vocabulary | 1997 | ANSI/ISO/DIS 14050 | |||
ANSI | Rigid Steel Conduit - Zinc Coated | ANSI C80.1 | ||||
ANSI/IEEE | IEEE Guide to Software Requirements Specifications | 1984 | ANSI/IEEE 830 |