The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/BHMA | Door Controls – Closers | 1986 | ANSI/BHMA A156.4 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.2 – 1990 Overhead and G | 1993 | ANSI/ASME B30.2c | |||
AWS | Sampling Strategy Guide for Evaluating Contaminant | 1 | 671.52 A511 No. F1.3-91 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 1993 | ANSI/ASCE 7 | |||
API | Shop Testing of Automatic Liquid Leval Gages | 1 | 665.5028 A51 No. 2509B | R1997 | ||
ANSI/AWWA | Protective Interior Coatings for Valves and Hydran | 1 | ANSI/AWWA C550 – 2005 | |||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1988 Pipe Flanges and | ANSI/ASME B16.5a | ||||
ANSI | For Emergency Eyewash and Shower Equipment | ANSI Z358.1 | ||||
ANSI/ASME | Slings | 1 | 2006 | ANSI/ASME B30.9 – 2006 | ||
ANSI/ASME | Dimensioning and Tolerancing | 1 | 2009 | ANSI/ASME Y14.5-2009 | ||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-201-96 | |||
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 671.51 A511 No. A5.2-92 | |||
ANSI | Precision Methods for the Determination of Sound P | ANSI S12.31 | ||||
ANSI | Test Procedure and Acceptance Criteria for Physica | ANSI A250.4 | ||||
AWS | Standard Welding Procedures Specification (WPS) fo | 1 | 1996 | 671.52 A511 B2.1-1-204-96 | ||
AWS | Specification for Aluminum and Aluminum Alloy Elec | 1 | 1991 | 671.51 A511 No. A5.3-91 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.8 – 1989 Gas Transmission | 1992 | ANSI/ASME B31.8c | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1993 Below the Hook | 1996 | ANSI/ASME B30.20a | |||
ANSI | Gear and Spline Drawing Standards Part 2 – Bevel a | 1978 | ANSI Y14.7.2 | |||
ANSI/SAE | Torque Determination, Method of, for Tube or Hose | 1 | ANSI/SAE ARP 600B – 2004 | |||
ANSI | Roll Forming and Roll Bending Machines-Safety Requ | 1996 | ANSI B11.12 | |||
ANSI/UL | Fire Test of Roof Deck Constructions | 1995 | ANSI/UL 1256 | |||
ANSI/ASSE | Safety Requirements for Workplace Walking/Working | 2007 | ANSI/ASSE A1264.1 – 2007 | |||
AWS | Recommended Practices for Electron Beam Welding | 1 | 1992 | 671.52 A511 No. C7.1-92 | ||
ANSI/SAE/AS | Fitting, Sleeve, Flared | ANSI/SAE/AS 5176B | ||||
AWS | Guide for the Training and Qualification of Weldin | 1 | 1995 | 671.52 A511 No. EG2.0-95 | ||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | ANSI/ISO 14042 | ||||
ANSI/IEEE | Maintenance, Testing, and Replacement of Vented Le | ANSI/IEEE 450 | ||||
ANSI/ASME | Methods for Performance Evaluation of Coordinate M | ANSI/ASME B89.1.12M | ||||
ANSI/ASME | Process Piping | ANSI/ASME B31.3 | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.11 – 1988 Monorails and U | ANSI/ASME B30.11a | ||||
ANSI/ISO/TS | Quality Systems – Automotive Suppliers – Particula | 1999 | ANSI/ISO/TS 16949 | |||
ANSI/IPC | Modification and Repair for Printed Boards and As | 1977 | ANSI/IPC R-700-B | |||
ANSI/ISO/TR | Guidelines for Managing the Economics of Quality | 1998 | ANSI/ISO/TR 10014 | |||
ANSI/IPC | Acceptability of Electronic Assemblies | ANSI/IPC A-610D | ||||
ANSI/ASME | Side Boom Tractors | 2004 | ANSI/ASME B30.14 | |||
AWS | Specification for Thermal Spraying Zinc Anodes on | 1 | 671.52 A511 No. C2.20/C2.20M-2002 | |||
ANSI/ASME | Backwater Valves | 2003 | ANSI/ASME A112.14.1 | |||
AWS | Specification for Welding of Rotating Elements of | 1 | 671.52 A511 No. D14.6-81 | |||
AWS | Specification for Carbon Steel Electrodes and Flux | 1 | 671.52 A511 No. A5.17-89 | |||
ANSI/ASHRAE/IESNA | Energy Standard for Buildings Except Low-Rise Resi | 2 | ANSI/ASHRAE/IESNA 90.1 | |||
AWS | International Filler Metal Specifications Cross Re | 1 | 1987 | 671.52 A511 No. IFS-87 | ||
ANSI/ASME | Cast Copper Alloy Threaded Fittings Classes 125 an | 2006 | ANSI/ASME B16.15-2006 | |||
ANSI | Addenda to ANS Z21.10.3 - 1987 for Gas Water Heate | ANSI Z21.10.3a | ||||
AWS | Specification for Welding Procedure and Performanc | 1 | 671.52 A511 No. B2.1-2000 | |||
AWS | Gas Tungsten-Arc Welding of Titanium Piping and Tu | 1 | 671.51 A511 No. D10.6-73 | |||
ANSI | Metric Module, Involute Splines (R1989) | ANSI B92.2M | ||||
ANSI/ASME | Factory-Made Wrought Buttwelding Fittings | ANSI/ASME B16.9-2007 | ||||
AWS | Specification for Titanium and Titanium Alloy Weld | 1 | 1990 | 671.52 A511 No. A5.16-90 | ||
ISO | Specification for the Qualification of Welding Sup | 1 | 2000 | 671.52 A511 No. B5.9-2000 |