The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI/ASME | Power Piping | 1995 | ANSI/ASME B31.1 | |||
ANSI | Involute Splines and Inspection | 1970 | ANSI B92.1 | |||
NEMA | Performance Measurements of Gamma Cameras | 2007 | NU 1 - 2007 | |||
AWS | Recommended Safe Practices for Thermal Spraying | 1 | 1973 | 671.51 A511 No. C2.1-73 | ||
AWS | Laboratory Method for Measuring Fume Generation Ra | 1 | 1999 | 671.52 A511 No. F1.2-99 | ||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1-1-208-96 | |||
AWS | Specification for Low Alloy Steel Covered Arc Weld | 1 | 671.51 A511 No. A5.5-81 | |||
ANSI/IEEE | IEEE Standard Reference Designations for Electrica | ANSI/IEEE 200 | ||||
ANSI/ASME | Safety Standard for Personnel and Burden Carriers | ANSI/ASME B56.8 | ||||
ANSI/UL | Office Appliances and Business Equipment | 1982 | ANSI/UL 114 | |||
ANSI/NEMA | Motors and Generators | 1978 | ANSI/NEMA MG1 | |||
ANSI/ISO | Quality Management and Quality Assurance Standards | 1997 | ANSI/ISO 9000-3 | |||
ANSI/ASQC | Generic Guidelines for Quality Systems | 1979 | ANSI/ASQC Z1.15 | |||
SMACNA | HVAC Duct Construction Standards Metal and Flexibl | SMACNA 1035 | ||||
ANSI/SAE/AMS | Steel, Bars, and Forgings 0.18-0.23C (SAE 1022) | ANSI/SAE/AMS 5070H | ||||
AWS | Standard Procedures for Determination of Moisture | 1 | 671.52 A511 No. A4.4M-2001 | |||
ANSI | Rigid Steel Conduit - Zinc Coated | ANSI C80.1 | ||||
ANSI | Construction and Demolition Operations – Scaffoldi | ANSI A10.8 | ||||
ANSI/ASME | Guide for Inspection of Elevators, Escalators, and | 1 | 2012 | ANSI/ASME A17.2 | ||
ANSI/ASME | Welded and Seamless Wrought Steel Pipe | ANSI/ASME B36.10M | ||||
ANSI/ASME | Addenda to ANSI/ASME B31.11 – 1989 Slurry Transpor | ANSI/ASME B31.11a | ||||
ANSI/ASME | Addenda to ASME B31.1 – Power Piping | ANSI/ASME B31.1b | ||||
ANSI/ASME | Addenda to ANSI/ASME 16.47-1996 Large Diameter S | ANSI/ASME B16.47a | ||||
AWS | Standard Welding Procedures Specification (WPS) fo | 1 | 1996 | 671.52 A511 B2.1-1-204-96 | ||
ANSI/AMS | Cobalt Alloy. Corrosion and Heat Resistant, Invest | ANSI/AMS 5385G | ||||
AWS | Specification for Aluminum and Aluminum Alloy Elec | 1 | 1991 | 671.51 A511 No. A5.3-91 | ||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 671.52 A511 No. C4.2-90 | |||
AWS | International Filler Metal Specifications Cross Re | 1 | 671.52 A511 No. IFS-87 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.20 – 1985 Below the Hook | 1987 | ANSI/ASME B30.20a | |||
ANSI/ASME | Screw Threads – Standard Practice for Calculating | 1992 | ANSI/ASME B1.30M | |||
ANSI/ASQC | Specification of General Requirements for a Qualit | 1985 | ANSI/ASQC C1 | |||
ANSI | Safety Requirements for Personal Fall Arrest Syste | 2 | 1992 | ANSI Z359.1 | ||
ANSI/ASME | Pipeline Transportation Systems for Liquid Hydroca | 1998 | ANSI/ASME B31.4 | |||
ANSI | Methods for Measuring the Real Ear Attenuation of | 1997 | ANSI S12.6 | |||
ANSI | Recommended Specifications for Standard Steel Door | 1998 | ANSI A250.8 | |||
AWS | Structural Welding Code Reinforcing Steel | 1 | 1998 | 671.51 A511 No. D1.4-98 | ||
AWS | Recommended Practices for Automotive Portable Gun | 1 | 1966 | 671.52 A511 No. D8.5-66 | ||
AWS | Guide for the Visual Examination of Welds | 1 | 671.52 A511 No. B1.11-2000 | |||
AWS | Recommended Practices for the Brazing of Copper Tu | 1 | 671.51 A511 No. D10.13/D10.13M-2001 | |||
ANSI/ISO | Earth-Moving Machinery – Operation and Maintenance | ANSI/ISO 6750 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Des | ANSI/ASQC Q9001 | ||||
ANSI/ASME | Floating Cranes and Floating Devices | ANSI/ASME B30.8-2010 | ||||
ANSI/SAE/AS | Fitting, Elbow, 90, Internal Straight Thread Port | ANSI/SAE/AS 5190 | ||||
ANSI/ISO | Environmental Management – Life Cycle Assessment – | 2000 | ANSI/ISO 14043 | |||
ANSI/IEEE | Supplement to Graphic Symbols for Electrical and E | 1986 | ANSI/IEEE 315A | |||
ANSI/SAE/AS | Fitting, Elbow, 90 Standard and Reducer, Bulkhead, | ANSI/SAE/AS 1038 | ||||
ANSI/ISO/DIS | Environmental Labels and Declarations – Type I Env | ANSI/ISO/DIS 14024 | ||||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.013-91 | |||
ANSI | For Financial Services - Financial Transaction Car | ANSI X4.16 | ||||
ANSI | Machine Tools - Mechanical Power Presses – Safety | ANSI B11.1 |